Full Answer
Where is the model number on a craftsman radial arm saw?
The recalled Craftsman® 8-, 8¼-, 9- and 10-inch radial arm saws have a model number beginning with 113, usually located on the base of the saw. The brand name "Craftsman®" and store name "Sears" are written on the saws. Sears stores and catalogs sold the 8-, 9- and 10-inch saws from 1958 through 1992.
How can I tell what year my Craftsman drill was made?
On my older drill, circular saw, and saber saw it just provide the model number and there's nothing there that would indicate the years that I bought those. Craftsman model numbers are usually in a 3 x 5 number format, with the first three numbers indicating the contracted or source manufacturer and the last five numbers the exact model number.
Is there a recall on Craftsman radial arm saws?
Emerson is offering a free repair kit that provides a complete blade guard. Consumers should stop using their Craftsman® radial arm saws immediately and call Emerson Tool Co. to determine if their saw is recalled and to ensure that they have proper safety and use instructions.
How to contact CPSC about the Emerson radial arm saws recall?
Release # 01-031 Emerson Recall Hotline: (800) 511-2628 CPSC Consumer Hotline: (800) 638-2772 CPSC Media Contact: Ken Giles, (301) 504-7052 Emerson Tool Co. Contact: Walt Sharp, (314) 982-0567 CPSC, Emerson Tool Co. Announce Recall of Craftsman® Radial Arm Saws Sold by Sears, Roebuck and Co.WASHINGTON, D.C.
Do numbers on motors matter?
Is the serial number of a craftsman tool correct?
Where is the model number on Craftsman radial arm saw?
The Model Number will be found on a plate attached to your saw, at the left side of the base. Always mention the Model Number in all correspondence regarding the CRAFTSMAN RADIAL SAW or when ordering repair parts.
What tool replaced the radial arm saw?
compound miter sawDuring the late 1970s, the compound miter saw began to replace the radial arm saw, but only for crosscuts and miter cuts since miter saws are unable to perform rip cuts. The radial arm saw can be less safe when used by an inexperienced or untrained operator, but is not as dangerous when used properly.
Are radial arm saws still made?
We manufacture Radial Arm Saws, Beam Saws, Crosscut Power Saws, Saw Extension Tables, Saw Measuring Systems and Miter Saw Stands.
What is a Craftsman radial arm saw?
This Craftsman Professional 3 hp 10" Radial Arm Saw features Laser Trac technology designed to assist in aligning the blade to the work piece. With a sturdy work surface for large work pieces and a built-in accessory shaft, this radial saw is durable, versatile and exceptionally strong.
Is the Craftsman radial arm saw recall still active?
The upgrade kits are amazing. If you have an older craftsman/sears radial arm saw, visit this website for either $100 or an awesome upgrade kit including tables, fence and a really nice and safe blade guard.
Why are radial arm saws unpopular?
The biggest risk with radial arm saws is as you are cutting and it's working into the wood, it can get a bit too much traction, start to climb cut and the saw can come flying back.
Why were Craftsman radial arm saws recalled?
Injuries caused by contact with the blade or by wood kicked back by the saw include hand and finger amputations; cut and broken hands and fingers; and facial injuries. The recalled Craftsman 8-, 8 1/4-, 9- and 10-inch radial arm saws have a model number beginning with 113, usually located on the base of the saw.
What kind of cut should never be done on the radial arm saw?
Never clear small pieces while blade is moving. Never adjust saw or setup while saw is running. Never cross arms. Radial arm saws cut in a fashion that pulls the blade into the piece pushing the stock to the fence.
What is the average cost of a radial arm saw?
The price of radial arm saws starts from $100 and ends at $500 or more, depending on their functionality and features.
Is there a recall on Sears radial arm saw?
Consumers should have the model and serial numbers of their saw available when they call. The recalled Craftsman 8-, 8¼-, 9- and 10-inch radial arm saws have a model number beginning with 113, usually located on the base of the saw. The brand name “CRAFTSMAN” and store name “Sears” are written on the saws.
How much is radial worth?
The combined company, Radial, was announced on April 19, 2016. Sterling Partners estimated Radial's initial value at more than $1 billion.
Who makes Craftsman radial saws?
Emerson Tool Co.Announce Recall of Craftsman® Radial Arm Saws Sold by Sears, Roebuck and Co. WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Emerson Tool Co., of St. Louis, Mo., is recalling about 3.7 million Craftsman® radial arm saws.
Can a radial arm saw replace a table saw?
A table saw and a radial arm saw can perform the same types of woodworking tasks, but each tool has a different design. The primary difference between the two is their cutting action, which makes each ideal for distinct types of wood cutting.
How do you use a radial arm saw as a router?
0:024:01Routing with a Radial Arm Saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd attached it as you can see with just little dabs of hot wood. Blue or hot blue not necessarilyMoreAnd attached it as you can see with just little dabs of hot wood. Blue or hot blue not necessarily wood glue but just ordinary hot glue.
How do you rip with a radial arm saw?
1:035:05How to Rip Wood on a Radial Arm Saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the proper way to rip on a radial arm saw is from this side the reason being is because the bladeMoreSo the proper way to rip on a radial arm saw is from this side the reason being is because the blade rotates this way okay I'm going to show you the reason why creeping from the other side is.
How do you fly with a radial arm saw?
1:234:55Radial Arm Saw as a Surface Planer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide the accessory side i'm just going to rotate the head. The accessory side is over here. Go aheadMoreSide the accessory side i'm just going to rotate the head. The accessory side is over here. Go ahead and raise that up as high as it'll. Go and there is the cutting mechanism.
Craftsman Radial Arm Saw Recall / Free Upgrade Kit - Google Groups
I called Sears about the recall and they told me my saw wasn't affected (typical Sears BS) when I knew mine was. Called Emerson at 1-800-511-2628 and had them run the model and serial number. Sure enough, they sent me the retrofit kit which includes the new table parts.
DeWalt Products Co. - Serial Number Registry | VintageMachinery.org
Submitting Machines to the Serial Number Registry If you would like to add your machine to the Registry, please Submit Serial Number Information.You may also contact the Registry Steward for this manufacturer: Brian Kachadurian Please provide at least the following basic information:
How To Date A 113 Series Craftsman Radial Arm Saw
Wisdom comes with age and experience. You can't buy it or rush it, you need to earn it, slowly, over time. The years of experience a woodworker has often shows up in the color of their hair.
The Delta Vintage Project - Part One: Serial Numbers
Letter prefixes: LP, LQ, LR, LS, LT, and LU were not used. Letter prefixes: MJ, MK, ML, MM, MN, MO, MP, NA, and NB range in years 1979 through 1982, but we do not have information to tie these to a year of manufacture.
CRAFTSMAN - University of Wisconsin–Milwaukee
Operator's Manual CRAFTSMAN + PRO I 0 H A L 10 in. Stationary RADIAL ARM SAW Model No. 315.220100 Save this manual for future reference. CAUTION: Read and follow all Safety Rules and Operating
What Happened with the Craftsman Radial Saw Recall
Under normal circumstances, a Craftsman radial saw blade should be sold with an entire guard that covers the entirety of the user-facing edge.
Who Is Eligible for the Craftsman Radial Saw Recall
The recalled Craftsman saws each can be identified with the model number that begins with the number 113, which can generally be located near the base of the product. The specific sizes of these radial arm saws are 8," 8.25", 9" and 10" respectively. 12" Craftsman saws are not eligible for recall.
Steps to Manually Submitting a Claim for the Craftsman Radial Saw Recall
The following is the most straightforward way that you can put forth your recall claim in the process of securing your funds for the case.
Do I Immediately Get a Refund If I Report My Product?
Eligible customers who report the product can be entitled to a free repair kit with a new complete blade guard part from Emerson. If the new blade guard isn't compatible with an older model, customers can receive 100 dollars in compensation for the return.
Why Use DoNotPay to Handle Your Craftsman Radial Saw Recall Case Matters
If you want to ensure that the recall process is handled as efficiently as possible, it absolutely is wise to invest in DoNotPay's recall management services. DoNotPay is fast, easy, and successful. Here are some of the strongest reasons that you might have to use DoNotPay for your recall claim needs.
Who is recalling Craftsman radial arm saws?
CPSC, Emerson Tool Co. Announce Recall of Craftsman® Radial Arm Saws Sold by Sears, Roebuck and Co.WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Emerson Tool Co., of St. Louis, Mo., is recalling about 3.7 million Craftsman® radial arm saws for repair. These radial arm saws were sold without a guard that covers the entire blade. Consumers have come into contact with the blade or have been hit by pieces of wood kicked back by the saws, resulting in severe injuries.
What saws are recalled by Sears?
CPSC, Emerson Tool Co. Announce Recall of Craftsman® Radial Arm Saws Sold by Sears, Roebuck and Co. WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Emerson Tool Co., of St. Louis, Mo., is recalling about 3.7 million Craftsman® radial arm saws for repair. These radial arm saws were sold without a guard that covers the entire blade. Consumers have come into contact with the blade or have been hit by pieces of wood kicked back by the saws, resulting in severe injuries.
How to contact Emerson about a saw recall?
For more information, call Emerson at (800) 511-2628 anytime, or visit the firm's web site at www.radialarmsawrecall.com. Consumers can also view a video clip about this recall (transcript).
How much did Sears 8 inch saws cost?
The 8¼-inch saws were sold from 1990 through 1995. The saws sold for between $100 and $700, depending on the model, year purchased and accessories.
Do numbers on motors matter?
Disregard any numbers on the motor, they do not matter as it was made separately.
Is the serial number of a craftsman tool correct?
From my experience with craftsman power tools the serial numbers often have a decimal point ( . ) so abovd number is likely correct.
