Do all Rheem water heaters have an anode rod?
All water heaters have one Anode Rod. This rod starts to attract the corrosion (caused by the water) which minimizes the tank corrosion after the glass liner fails. Rheem Professional Grade has one Anode Rod with an optional port for a second rod. The Anode Rod is made of magnesium which corrodes easier than steel.
How do I change the anode rod in my Rheem water heater?
1:244:08How to Replace a Water Heater Anode Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipLocate the anode rod position on the top of the tank. It will be underneath one of the plastic. CapsMoreLocate the anode rod position on the top of the tank. It will be underneath one of the plastic. Caps on older models the anode rod may be exposed. Remove the plastic cap to expose the anode rod.
What kind of anode rod is in a Rheem water heater?
From the Manufacturer. The Rheem SP11526C is a magnesium anode rod.
Where is the anode on an electric water heater?
When you are facing the front of your water heater, the sacrificial magnesium or aluminum anode is located at the back, between the cold and hot water connections. Refer to your water heater's user guide for more information.
Do electric water heaters have an anode rod?
Electric water heaters with steel water storage tanks have anode rods. These are needed for the continued functioning of the heater as they corrode instead of the tank. If the electric water heater tank is stainless steel, the unit won't have an anode rod. Tankless electric water heaters don't have anode rods.
Can I replace anode rod myself?
You can replace the anode, but it's not easy. Most tanks are located somewhere without enough headroom to easily remove the old rod or insert a new one. To begin the process, turn off the electricity (or gas) to the heater, shut its water supply, and open a hot-water faucet to relieve pressure inside the appliance.
How long does Rheem anode rod last?
Therefore, the average heater only starts to rust at the 10 to 12 year mark. For this reason, we believe 12 years should be the limit for replacing anodes in standard model heaters. Again, exceptions can be made when the heater looks in good condition and where the anode is still working.
How do you change anode rod in electric water heater?
0:391:31How to Replace an Electric Water Heater Anode Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe foam insulation. Then unthread the anode rod and pull it up and out from the tank wrap the pipeMoreThe foam insulation. Then unthread the anode rod and pull it up and out from the tank wrap the pipe thread sealing tape around the threads of the new anode rod thread.
How long is anode rod for Rheem 50 gallon water heater?
Rheem Water Heater Anode Rod Size Although there is a large range in lengths, the average length, in general and for Rheem water heaters in particular, is 42″ to 44 and 3/8″.
How do I know if my hot water heater anode is bad?
How to Tell If Your Anode Rod Is Bad. Smelly or discolored hot water is the biggest sign that something is wrong with your anode rod. When your anode rod has completely corroded, it can no longer protect your hot water heater lining. Your anode rod will go bad every five years or so.
Where is the anode rod located?
Locate the anode rod. Most will be located on top of the water heater, though some may have the anode located on the side. On most it will look like a hexagonal plug screwed into the heater.
Can you run a water heater without an anode rod?
Water heaters don't need anode rods to function, but they help preserve the quality of the water and can double the lifespan of the heater. Without anode rods, a water tank will corrode and leak or even burst. Anode rods are designed to deteriorate, so they need to be replaced in order to remain functional.
How long does Rheem anode rod last?
Therefore, the average heater only starts to rust at the 10 to 12 year mark. For this reason, we believe 12 years should be the limit for replacing anodes in standard model heaters. Again, exceptions can be made when the heater looks in good condition and where the anode is still working.
How long is anode rod for Rheem 50 gallon water heater?
Rheem Water Heater Anode Rod Size Although there is a large range in lengths, the average length, in general and for Rheem water heaters in particular, is 42″ to 44 and 3/8″.
How often should you replace the anode rod in a water heater?
By replacing your anode rod every 3-5 years, your water heater can last well over 20 years without any risk of leaks and resulting water damage. Unfortunately, if you ignore this important water heater maintenance task, you may need to replace the entire water heater after only 10 years of use.
Which is better magnesium or aluminum anode rod?
However, aluminum rods are the better choice for a water heater that heats up sulfate-tinged water. Sacrificial anodes change sulfates into hydrogen sulfides. When a magnesium anode rod is used, the level of hydrogen sulfide can get too high and cause a rotten-egg stench in your hot water.