Configuration files are stored in the following locations:
- The running configuration is stored in RAM.
- On all platforms except the Class A Flash file system platforms, the startup configuration is stored in nonvolatile random-access memory (NVRAM).
- On Class A Flash file system platforms, the startup configuration is stored in the location specified by the CONFIG_FILE environment variable. ...
Where is startup configuration stored in Linux?
A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. To copy your running configuration into the startup configuration you need to type the command copy running-configuration startup-configuration .
How to copy running configuration to startup configuration?
A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. To copy your running configuration into the startup configuration you need to type the command copy running-configuration startup-configuration.
Where are configuration files stored in a Cisco router?
This saved configuration is stored in non-volatile memory called flash memory which allows it to be written to many times and retain its contents when the electrical power is removed. Cisco routers must work with two configuration files: the running configuration file and the startup configuration file.
What is running configuration in Linux?
running configuration Immediately after you type a command in the global configuration mode, it will be stored in the running configuration. A running configuration resides in a device’s RAM, so if a device loses power, all configured commands will be lost.
In which startup configuration is saved in?
NVRAMThere are two types of configuration files: the running (current operating) configuration and the startup configuration. The running configuration is stored in RAM; the startup configuration is stored in NVRAM.
Where is the startup configuration stored on Cisco switch?
NVRAMOn all platforms except the Class A Flash file system platforms, the startup configuration is stored in nonvolatile random-access memory (NVRAM).
How do I check the startup configuration file?
Use the show running-config command to view the running configuration file. Use the show startup-config command to view the startup configuration file.
Is startup config stored in flash?
The write memory command stores the runtime configuration in a flash file called startup-config. txt. During bootup, the system reads and applies the startup-config.
What is a startup configuration file?
The Startup Configuration File is an XML file that you can use to launch Geo SCADA Expert on a Multi-Monitor setup (see Launch a ViewX Client on a Multi-Monitor Setup), and/or have customized Window Container behavior.
Where does a Cisco network device store the startup configuration file?
Nonvolatile RAMNVRAM — Nonvolatile RAM (NVRAM) stores the initial or startup configuration file that is used when the Cisco device is powered on or reloaded.
How do I copy a running config file?
Use the copy system:running-config {ftp: | rcp: | tftp:} command to copy the current configuration file to a network server using FTP, rcp, or TFTP. Use the copy nvram:startup-config {ftp: | rcp: | tftp:} command to copy the startup configuration file to a network server.
What happens if a router can't find a configuration file at startup?
If you do not configure the router to load specific network or host filenames, it will try to load the default files, shown in the trace above. If these files don't exist, the router will pause for a significant amount of time while it tries to find them.
How do I control what programs run at startup?
Open the windows startup menu, then type "MSCONFIG". When you press enter, the system configuration console is opened. Then click the "Startup" tab which will display some programs that can be enabled or disabled for startup.
What memory location holds the running configuration file?
The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show running-config command.
What's the difference between running configuration and startup configuration?
The startup configuration is the configuration your devices run on when they reboot or power up. The running configuration is the current version of the configuration file the device runs on.
How is configuration information stored by devices?
The router's configuration information is stored in a device called the Non-Volatile RAM (NVRAM), and the IOS images are stored in a device called the flash (lowercase). It's important to keep these names straight because, of course, all Flash memory is nonvolatile RAM.
What is startup configuration Cisco?
The startup configuration is the configuration your devices run on when they reboot or power up. The running configuration is the current version of the configuration file the device runs on.
Where is Cisco config file?
Configuration files are stored in the following locations: The running configuration is stored in RAM. On all platforms except the Class A Flash file system platforms, the startup configuration is stored in nonvolatile random-access memory (NVRAM).
Which of the following has stored the startup configuration of a router?
The router's configuration information is stored in a device called the Non-Volatile RAM (NVRAM), and the IOS images are stored in a device called the flash (lowercase). It's important to keep these names straight because, of course, all Flash memory is nonvolatile RAM.
What is the purpose of the startup configuration file on a Cisco?
Startup configuration files (startup-config) are used during system startup to configure the software. Running configuration files (running-config) contain the current configuration of the software.