Where should you put thermometer on wood stove?
- Place one of the magnetic thermometers on the metal flue of the wood stove.
- Attach the magnetic base of the second thermometer on either the top of the stove or on the top third of the metal firebox.
- Light the fire in the stove and observe the readings on the dial face.
Where should a wood stove thermometer be placed?
Dec 13, 2021 · Wood Stove Thermometer Placement. Stovepipe thermometers for wood burning stoves should only be placed on the front of the stovepipe and placed a certain distance up the stovepipe in line with the manufacturer’s guidelines. Stove top thermometers should only be placed on the top surface of a wood stove.
Where is the best place to store a thermometer?
Mar 11, 2022 · In order to avoid damaging the stovepipe, thermometers for wood burning stoves should only be installed on the front of the stovepipe and a specific distance up the stovepipe in accordance with the manufacturer’s recommendations. Stove top thermometers should only be used on the topmost surface of a wood stove to ensure accurate readings.
What is the best temperature for a wood stove?
Where should you put thermometer on wood stove? The stove thermometer can only be used on a single wall flue, and it is attached to the flue using a magnet. To get a good reading, place it 18 inches above the stove for a short period after you ignite the appliance.
Where to put my wood stove?
May 22, 2020 · A stove top thermometer sits on top of the stove itself, and a magnet ensures it maintains a good connection. Advertisement. A stove pipe thermometer sticks to the stove pipe via a magnet and reads the temperature of the air passing through the pipe. Install it on the pipe approximately 12 inches above the stove top.
Why do you need a thermometer on a catalytic stove?
A thermometer is needed to indicate what the fire is doing in old stoves that don't have glass doors. Manufacturers of catalytic stoves normally use the readings of a surface thermometer to indicate when it is time to engage the catalyst.
Why is there no correct operating temperature for wood stoves?
It turns out that there is no correct operating temperature for wood stoves because their output is modulated to provide enough heat for the conditions.
What happens to the flue gas temperature when a wood stove is operating?
For most of the time a wood stove is operating, its flue gas temperature is either rising or falling.
How to avoid overfiring?
At the high end, once a fire has reached full intensity after loading, with the firebox full of flames, avoid letting it rage with the air control fully open for more than a few minutes. Reduce the combustion air setting until the flames begin to slow down.
What does it mean when wood is bright?
Bright flames mean the wood is never allowed to smolder. During the moderately cool weather of spring and fall you can turn down the air until the flames look slow and lazy, but never so much that the flames disappear. That looks after the low end of the temperature range.
How hot can a stove be in cold weather?
In very cold weather, you can run the stove hot, at say 2/3rds of max without doing any damage. You can tell when you've reached about 2/3rds of maximum as you turn down because the fire stops roaring and the flames slow down somewhat. That looks after the high end. And that's all you need to know.
Do you need a flue pipe thermometer on a wood stove?
We don't recommend the use of flue pipe thermometers on modern wood stoves that have glass doors with airwash (so they stay fairly clear). Your best indication of how the fire is doing is by looking at it. There are cases in which stove thermometers may be needed. A thermometer is needed to indicate what the fire is doing in old stoves ...