Why is my lawn mower blade upside down?
Why grind down mower blades?
What is the sail on a lawn mower?
How to sharpen a balance blade?
What is a high lift blade?
What is a gator blade?
How to level out a sharp angle grinder?
See 2 more
DO NOT PUT LAWN MOWER BLADES ON UPSIDE DOWN!! - YouTube
In this video i show a common mistake that is sometimes made when replacing mower blades, i also explain what happens when a blade is put on wrong and i show...
Which Side of the Lawn Mower Blade is Up? - How to Tell
How to Know Which Side of the Lawn Mower Blade is Up? If you have no idea what you’re doing, you’ve got a 50-50 shot at guessing right. And those are not bad odds.
Which Way Do Mower Blades Go On? | eHow
Some blades have markings indicating which side should face up, making it easy to tell how the blade goes on the mower. If your blade doesn't and you weren't able to reference it to the old blade, look at the cutting edge of the blade.
How to get rust off a bolt?
If the blade has been in place for a long time, undoing the bolt may be challenging. You can use a rust-penetrating spray to help loosen the bolt. You may also need to rub the bolt with a wire brush to help loosen the rust deposits. If you’re still struggling to get the bolt undone, you can knock the side of the bolt with a hammer.
Do all lawn mower blades have a reverse thread?
This is a safety feature that helps ensure that the blade won’t be able to loosen the nut as it rotates. It’s worth noting that not all lawnmower blades have a reverse-threaded nut, as the design of each lawnmower varies slightly. Follow these steps to remove the blade from your lawnmower:
Which way should a lawn mower blade be moved?
If on the right side, move the blade in a counterclockwise direction, and if on the left side, move it in a clockwise direction.) When doing this, this sharp edge of the blade should be the edge that leads. If it does, then you have the correct lawn mower blade position. If not, you need to flip it over.
How to Know Which Side of the Lawn Mower Blade is Up?
If you have no idea what you’re doing, you’ve got a 50 -50 shot at guessing right . And those are not bad odds. But there are a few very simple tricks that you can use to get it right 100% of the time. I’m not really a betting man, but a 100% chance of winning sure sounds good…
What happens if you install a mower blade wrong way round?
But what you’ll notice if you install this blade the wrong way round is that the quality of the cut your mower gives you actually gets a lot worse. And that makes a lot of sense, because it’s now using the blunt edge to cut the grass (well, more like hack). Imagine if tonight, when you are preparing dinner, you chop your veggies up using the blunt edge of your knife. I’d put money on it being a mess! The same goes for a lawn mower blade that is the wrong way up.
How to tell if a lawn mower blade is upside down?
With the mower tipped on its side, move the blade towards you (the direction of the blade will depend on whether the mower is tipped on its right side or left side. If on the right side, move the blade in a counterclockwise direction, and if on the left side, move it in a clockwise direction.) When doing this, this sharp edge of the blade should be the edge that leads. If it does, then you have the correct lawn mower blade position. If not, you need to flip it over.
What is the sharp side of a blade?
Sharp Side of Your Blade Closest to Ground. If you look at your blade, you’ll notice there’s a sharp side (the cutting edge) and a blunt side. The blunt side will usually have a raised edge, rather like wings. This raised edge is what “lifts” up your clippings once they’ve been cut into the air vacuum of the deck so they can be directed ...
Is it important to pay close attention to the blade on a lawn mower?
I hope I’ve stress ed enough that it’s really important to pay close attention to which way the lawn mower blade goes on. It’s a simple mistake to make, but one that can be costly both for you and your lawn. And it doesn’t need to be that way when there are some very simple tricks to ensure you have the correct lawn mower blade position.
Can you mark the grass side of a mower?
If you know for sure that your mower blade is the right way up before you remove it to sharpen it, you can mark the grass side yourself to avoid any confusion when it comes time to re-install it. I’ve done this myself in the past when using a blade that wasn’t stamped. A quick spray of paint and you’re done. Simple!
Where do you turn the blades on a lawn mower?
Lawn mower blades have turned up edges at the outer ends. They are supposed to be UP when the lawn mower is upright. So when installing the blade, turn the upraised edge or flange or wing TOWARDS the bottom of the mower deck. Then it will be right side up when you put the mower back on it’s wheels on the ground.
Where is the cut grass opening on a lawn mower?
That opening is typically on the RIGHT side of the deck and angled toward the BACK of the mower, leaving the clippings behind the machine. Look at the blades to see which way they MUST turn in order to accomplish that.
Why is my lawn mower blade so slow?
The blade is directly attached to the output shaft of the engine. The reason the RPM of the blade seems slow, is that it is manufactured that way for emissions.
What is a step up gator blade?
A step up is what is known as a gator blade and depending on manufacturer of the blade can be pretty thick and can do double duty as mulch and bag and side discharge but often costs more than the factory mulch blade. If you shop around and get the gator style blade that is thicker they often last pretty well.
Why won't my blade cut?
If you put the blade the wrong way, it won’t cut properly, because the sharp part faces the wrong way. Still, a lot of blades have the side that has to be down labeled DOWN. Others have the blades with the cutting edge lower, so it is easy to see. Of course, you should have noted the direction, when removing the blade.
What is a flat blade?
Essentially it is a totally flat blade often sharpened on front and back edges. It will most often be a very thick blade and is used by contractors a lot since when the front side gets dull and that happens quite quickly in areas with a lot of sand, they will simply turn the blade over and have a sharp edge ready.
Is it better to sharpen a mower blade or a power grinder?
Also you want to remove as little metal as possible. This will increase the life of the blade and make balancing faster and easier. This is one of those cases where a hand file is a much better choice than a power grinder.
Why is my lawn mower blade upside down?
Your mower blades are upside down if the sail or fin of the blade is pointed down. You will notice your grass gets beat up when running your blades upside down and you will have a very poor cut. Running a blade upside down can damage your spindles and cutter housings.
Why grind down mower blades?
Sharpening a blade is often less expensive than purchasing a blade. A professional can grind down mower blades to get rid of large nicks and gouges in the steel. Blade is properly balanced.
What is the sail on a lawn mower?
A blade goes on a lawn mower with the sail facing up towards the deck. The sail is the curved high side of the mower blade. When the blade is installed correctly, the sail will draw the grass into an upright position while the blade passes by to give your lawn a nice cut.
How to sharpen a balance blade?
Place the center hole of the blade over a nail on the wall. If one end of the blade hangs lower than other other end, you will need to sharpen the end that hangs lower until they are equally balanced on the nail. For a more precise guide for a balance blade, you can purchase a blade balancer.
What is a high lift blade?
The high lift mower blade is designed for plush lawns and helps create that nice stripe in the lawn with his high sail. Most new lawn mowers come standard with the high-lift blade. This blade will give you the best most precise cut. The high sail of the blade combined with the suction of the deck creates a lift to the grass to make it stand tall. With the grass standing tall, the mower blade sweeps by the grass to create a precise cut.
What is a gator blade?
The shredding blade or, as some people call it, a gator blade has a jagged edge on the sail to shred the grass blades after it has been cut. This helps make smaller grass clippings and smaller leaves in the fall. Making smaller grass clip pings will help the grass decompose quicker and give us a thatch layer on the lawn.
How to level out a sharp angle grinder?
Hold angle grinder perpendicular to the edge of the blade. Run the grinder along the length of the blade to level out any rough spots or nicks. Keep the grinder moving so it removes a little metal at a time and produces an even result.