What is Acticoat barrier?
What does Acticoat do to wounds?
How long does Acticoat dressing last?
How long does Acticoat 7 stay effective?
Why does Acticoat turn black?
Is Acticoat effective against microorganisms?
See 3 more
About this website
Which side of ACTICOAT goes down?
Apply prepared Acticoat directly to the wound surface (blue side down). Cover Acticoat with Duoderm Extra Thin dressing ensuring that edges overlap Acticoat dressing by 2cm and adhere to skin.
How do you apply ACTICOAT to a wound?
Applying an Acticoat dressingClean and dry your wound with soap and water.Remove the Acticoat from the package.Use a clean pair of scissors to cut the Acticoat dressing to fit the shape of your burn or wound.Wet the Acticoat with sterile water (do not use normal saline).Place the Acticoat on the wound surface.More items...
How often do you wet ACTICOAT?
Acticoat® must be kept damp at all times, not wet. Check your dressing every 2-3 hours while you are awake to make sure it stays damp. If the dressing is dry use tap water, sterile water, or distilled water to moisten it.
Why does ACTICOAT need to be moistened?
It is recommended that prior to use Acticoat be moistened with sterile water, not saline. This will help to ensure that the dressing provides a moist wound-healing environment whilst enabling the silver to exert its antimicrobial effect.
Does Acticoat remove Slough?
One week after commencing treatment with Acticoat Moisture Control, exudate levels had decreased and dressing changes were reduced to once every day. There was less slough evident on the ulcer bed, and the shiny appearance had resolved (Figure 12).
How do you apply silver dressing?
0:080:58HOW TO APPLY URGOTUL SILVER DRESSINGS - YouTubeYouTubeStart of suggested clipEnd of suggested clipTransparent film carefully apply the contact layer on the wound in a single layer. Cover ergo toolMoreTransparent film carefully apply the contact layer on the wound in a single layer. Cover ergo tool AG. With a secondary dressing suitable to absorb the level of wound exudate.
Does Acticoat stain skin?
In our patient, the dark skin staining resulted from burn wound treatment using Acticoat® dressing which contains silver.
How long can you use Acticoat for?
3 daysHighly conformable silver coated knitted polyester that allows the passage of exudate. ACTICOAT Flex 3 can be worn for up to 3 days while Flex 7 can be used for up to 7 days. Has been shown to be compatible with negative pressure wound therapy.
How does Acticoat dressing work?
The Nanocrystalline silver mediates the antimicrobial activity of ACTICOAT. When the dressing is moistened with sterile water or wound exudate, it activates the release of silver ions into solution where it provides antimicrobial activity within the dressing. Moisture is required for the continual release of silver.
How often do you change silver dressing?
Initially it may be necessary to change the dressing every 24 hours. The dressing remains effective for up to 14 days. 2. Gently remove the cover dressing.
How does ACTICOAT 7 dressing work?
ACTICOAT 7 dressing consists of five layers: two layers of abosorbent rayon/polyester between three layers of silver-coated, low adherent polyethylene net. ACTICOAT 7 is an absorbent wound dressing that helps to maintain a moist environment at the wound surface.
Is Acticoat waterproof?
ACTICOAT Surgical is a silver-coated Polyurethane layer, a white polyurethane foam pad and an adhesive coated waterproof polyurethane film layer.
How often do you change silver dressing?
Initially it may be necessary to change the dressing every 24 hours. The dressing remains effective for up to 14 days. 2. Gently remove the cover dressing.
Do you wet Acticoat Flex?
Remove ACTICOAT Flex 3 & 7 from the package, if the wound is dry or there is minimal exudate the dressing should be moistened with drinking water. Where there is moderate to high levels of exudate, the dressing does not need to be moistened.
How does Acticoat dressing work?
The Nanocrystalline silver mediates the antimicrobial activity of ACTICOAT. When the dressing is moistened with sterile water or wound exudate, it activates the release of silver ions into solution where it provides antimicrobial activity within the dressing. Moisture is required for the continual release of silver.
How long can silver dressings be used?
In the consensus document it is recommended that silver dressings should be used for 2 weeks initially and then the wound, the patient and the management approach should be re‐evaluated.
A guide to the use of ACTICOAT - Ortovit
How to apply ACTICOAT™ Image courtesy of Dr Marazzi MD. Department of plastic surgery and burns. Niguarda Ca’ Granda Hospital, Milano, Italy.
Advanced Wound Management Product Catalog - Smith & Nephew
Advanced Wound Care Products *smith&nephew September 25, 2017 Smith & Nephew Product Catalogue 3 Product Category Indications
ACTICOAT* Flex 3 | Antimicrobial Wound Dressing
ACTICOAT* Flex 3 is indicated as an antimicrobial barrier for management of partial- and full-thickness wounds including pressure injuries, venous ulcers, diabetic ulcers, ulcers, first- and second-degree burns, covering of grafts, and surgical sites.
Discharge Instructions: Caring for Your Acticoat Dressing
Discharge Instructions: Caring for Your Acticoat Dressing. You are going home with an Acticoat dressing in place. This dressing will allow your wound to heal and decrease the chance of infection.
How to remove acticoat?
Moisten - Remove Acticoat* (with Nanocrystalline Silver) † from package and moisten with sterile water (do not use saline).
What is the broad spectrum of Acticoat?
(In-Vitro data shows) Acticoat is an effective barrier to over 150 pathogens which includes a broad spectrum of gram positive and gram negative bacteria and fungal wound pathogens.
What is acticoat dressing?
Acticoat * (with Nanocrystalline Silver) † dressing is an effective antimicrobial barrier dressing. The nanocrystalline coating of silver rapidly kills a broad spectrum of bacteria in as little as 30 minutes. Acticoat dressing consists of three layers: an absorbent inner core sandwiched between outer layers of silver coated, ...
How fast does acticoat kill bacteria?
Acticoat is fast acting - Laboratory testing shows Acticoat rapidly kills bacteria in as little as 30 minutes - faster than other forms of silver
Does acticoat help with colonization?
Acticoat reduces the risk of colonisation. Colonisation can lead to infection, which slows down the wound healing process. This means greater patient comfort and can lead to shorter hospital stays and lower patient cost.
When should you use Acticoat?
ACTICOAT* should only be used on premature infants (less than 37 weeks gestation) when the clinical benefit outweighs potential risks.
What is Acticoat used for?
ACTICOAT* is indicated for use on partial- and full-thickness wounds, such as pressure ulcers, diabetic ulcers, venous ulcers, surgical sites, donor sites, grafts/dermal substitutes and first- and second-degree burns.
How long to drain Acticoat dressing?
Moisten the dressing with sterile water (do not use saline). Allow the dressing to drain on an absorbent surface in a sterile field for at least two minutes. Apply the ACTICOAT* Dressing to the wound surface, either side down.
Can Acticoat be used under compression therapy?
ACTICOAT* Dressings can be used under compression therapy. Regularly check dressing system and change if strikethrough occurs.
How to apply Acticoat dressing?
Applying an Acticoat dressing 1 Clean and dry your wound with soap and water. 2 Remove the Acticoat from the package. 3 Use a clean pair of scissors to cut the Acticoat dressing to fit the shape of your burn or wound. 4 Wet the Acticoat with sterile water (do not use normal saline). 5 Place the Acticoat on the wound surface. 6 Cover the Acticoat with a gauze dressing. 7 Roll a gauze wrap loosely around the dressing to hold it in place. 8 Wrap toward your body. If you are wrapping your arm, start at your hand and wrap toward your shoulder. 9 As you wrap, overlap the previous layer of gauze by about ½ inch.
What to cover acticoat with?
Cover the Acticoat with a gauze dressing.
Can you pull acticoat off?
Remove the Acticoat very gently. Never pull hard or rip the dressing. You could damage the wound and slow your recovery time.
How to apply Acticoat 7?
Apply the dry ACTICOAT* 7 dressing to the wound, either side down, as the exudate will be sufficient to activate the dressing. Cover the ACTICOAT* 7 dressing with an appropriate secondary dressing. Remove the dressing from package and cut to shape of wound. Moisten the dressing with sterile water (do not use saline).
What is Acticoat dressing?
ACTICOAT* Dressings are indicated as an antimicrobial barrier for the management of partial- and full-thickness wounds such as pressure ulcers, ulcers, diabetic ulcers, venous ulcers, surgical sites, donor sites, grafts/dermal substitutes and first- and second-degree burns.
How long can Acticoat dressing be left on wounds?
ACTICOAT* 7 Dressings can be left on wounds for up to seven days.
Can you use Acticoat on silver patients?
Do not use on patients with a known sensitivity to silver. During MRI (Magnetic Resonance Imaging) examination, remove from area within the anatomical field being imaged. Prior to administering radiation therapy, remove ACTICOAT*. A new dressing can be applied following treatment.
What is Acticoat dressing?
ACTICOAT is a silver coated antimicrobial barrier wound dressing for the treatment of a variety of wound types. It is widely used in routine clinical practice within the UK. ACTICOAT is CE marked and will be used within the intended indications for use. The proposed study is required for regulatory purposes.
What is the aim of the Acticoat study?
The aim of the study is to evaluate participant reported quality of life, safety, and overall performance with ACTICOAT in a clinical setting.
How many participants are in the Acticoat trial?
In total 25 participants will be recruited into the trial, comprising a minimum of 8 participants with a full or partial thickness burn and a minimum of 8 participants with a full or partial thickness chronic wound. All participants will have their wound dressed using ACTICOAT, and will be followed-up for 3 weeks.
What is acticoat made of?
Acticoat consists of two layers of a silver-coated, high-density polyethylene mesh, enclosing a single layer of an apertured non-woven fabric of rayon and polyester. The three components are ultrasonically welded together to maintain the integrity of the dressing in use.
Is acticoat contraindicated?
Acticoat is contra-indicated in patients with known hypersensitivity to any of the components of the product. If signs of a sensitivity reaction develop during use, treatment should be discontinued. No safety issues associated with the use of Acticoat have been identified to date.
Can you use saline with acticoat?
It is recommended that prior to use Acticoat be moistened with sterile water, not saline. This will help to ensure that the dressing provides a moist wound-healing environment whilst enabling the silver to exert its antimicrobial effect.
What is Acticoat barrier?
ACTICOAT is an effective barrier to a broad spectrum of wound micro-organisms 1.
What does Acticoat do to wounds?
ACTICOAT destroys bacteria within the dressing and at the wound site.
How long does Acticoat dressing last?
Highly absorbent dressing – Gels on contact with wound exudate. Antimicrobial coating – Provides antimicrobial performance for up to 3 days. ACTICOAT Absorbent is a silver coated highly absorbent alginate dressing which remains effective for 3 days and has a 7-day wear time.
How long does Acticoat 7 stay effective?
The antimicrobial barrier remains effective for up to 3 days for ACTICOAT and 7 days for ACTICOAT 7 increasing convenience for the patient and caregiver 6.
Why does Acticoat turn black?
Staining, discoloration, or silver specks may appear in the wound bed after the application of ACTICOAT because when silver oxidizes, it turns black. The discoloration or presence of silver specks is temporary and will dissipate over a 2-14 day period. This causes no harm to the patient.
Is Acticoat effective against microorganisms?
ACTICOAT with SILCRYST ◊ nanocrystals has been demonstrated in vitro to be effective against 150 micro organisms including resistant micro organisms such as MSRA and VRE. Staphylococcus aureus (Methicillin Resistant Staphylococcus aureus or MRSA)
