What is the difference between Briwax and Briwax original?
Briwax Original is formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture. The choice is yours, either product will leave you with the deep grain enriching BRIWAX shine.
How long does Briwax last on cabinets?
six to twelve monthsIf this fails a fresh application of Briwax will restore the finish. Q: How long will the shine last? A: Under normal conditions the shine will last for six to twelve months. It will lose its shine more swiftly in high wear areas or areas subjected to moisture.
Is Briwax the same as beeswax?
BRIWAX is a blend of beeswax and carnauba wax, two of the finest waxes known to man. BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods, untreated leather, marble, concrete, metal and painted surfaces.
What type of wax is Briwax?
Briwax is a solvent based blend of beeswax and carnauba wax.
How many coats of Briwax should I use?
Apply Briwax Danish Oil liberally with a clean dry rag or brush. On new wood 2 or 3 coats will be necessary.
Do you have to sand cabinets before using Briwax?
It doesn't require sanding is a very easy to apply. So if you are not a regular DIYer like me, you'll still get great results! First, here is a before picture of my oak kitchen cabinets without Briwax.
What are the disadvantages of wax on wood?
Disadvantages of wax finishes on woodDifficult to remove. Although wax is easy to apply to a floor, it is pretty difficult to remove. ... Natural wax finishes are not as persistent as Polyurethane. ... Wax is not suitable for all types of flooring. ... You need to apply it by hand.
Does Briwax stain wood?
I love using Briwax to stain and finish wood, especially pine. It leaves a beautiful touchable luster that enhances the natural character of the wood. It provides a lot of control over adding and removing color and is very forgiving of mistakes.
Does Briwax clean wood?
BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods and works amazingly to restore antique furniture. BRIWAX cleans, stains and polishes all in one product.
Is Briwax a finishing wax?
Briwax Original is a premium finishing wax that seals the surface of your woodwork while giving it a nice sheen, enhancing its natural appearance. The wax is commonly applied to antique furniture during restoration to revive the wood's original quality.
Can you use Briwax on dining table?
Although Briwax is suitable for dining surfaces when it has dried it does have solvents in when wet so please make sure the product is properly dried and buffed in before serving up your Sunday Roast on your beautifully protected Reclaimed Dining Table!
How do you remove Briwax?
Insert a white cloth into the bucket of mineral spirits until it is saturated and then wring it out. Rub the wood with the rag to remove any additional traces of Briwax. Rinse the rag in the mineral spirits often, continuing until no more residue comes off on the cloth.
Can Briwax be used on kitchen cabinets?
I used it on all my kitchen cabinets, trim and even other wood projects. 5.0 out of 5 stars No sanding necessary. Works great! I was looking for a way to update my 90's honey oak cabinets without sanding and painting them.
Does Briwax change wood color?
1:293:14Selecting the Right Briwax Color by TRG Products (800)327 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can expect lighter color if you put something on first like an oil or or shellac orMoreAnd you can expect lighter color if you put something on first like an oil or or shellac or something like that well that's going to fill up the pores of the wood.
Is Briwax water resistant?
Briwax Hard Wax Oil gives a clear satin finish that is hard wearing, water and stain resistant that will dry to an attractive, durable, natural finish.
Does Briwax stain wood?
I love using Briwax to stain and finish wood, especially pine. It leaves a beautiful touchable luster that enhances the natural character of the wood. It provides a lot of control over adding and removing color and is very forgiving of mistakes.
When was Briwax acquired?
The original company was acquired in 1961 by J.W. Bollom & Co. Ltd. Since Henry’s discovery in 1860, wood craftsmen around the world have used BRIWAX to protect, restore and recondition fine furniture and antiques to their original “patina” which could only be duplicated by laborious hand rubbing before the BRIWAX blend.
Where was Henry Flack's wax made?
In 1860, Henry Flack started manufacturing polishes and blending waxes in East London. These products were destined for workshops of the finest cabinetmakers and woodcarvers of the era. After WW2 they relocated in Beckenham, Kent. The original company was acquired in 1961 by J.W. Bollom & Co. Ltd.
Where is Briwax made?
Briwax makes leading luxury wood finishes in England for discerning wood lovers and furniture makers. Henry Flack started manufacturing French polishes and blending waxes in 1860 to supply the cabinet makers and woodcarvers in East London.
When did Briwax become Rustins?
The Bollom family acquired Briwax in 1961 and in 2013 Briwax became part of the Rustins group. The Briwax Product range has been carefully selected from the finest traditional trade finishes drawing on 150 years of experience supplying furniture manufacturers.
Where is Briwax made?
To this day, the Briwax product line is still manufactured exclusively in the U.K., but its proud reputation and premium product offerings have, of course, spread worldwide. In fact, Briwax products were awarded the Royal Warrant — the Queen of England’s highest seal of approval for quality. Two of Jack Bollom’s sons still own ...
What is briwax wax?
Briwax manufactures six different silicone-free wax products to suit a broad range of woodworking and other applications. Here’s a brief introduction to each of them: Briwax Original is a blend of beeswax and carnauba, with an emulsifying solvent, formulated as a soft paste. JaLea explained the solvent not only blends the waxes ...
What is Sheradale wax?
Sheradale Wax contains a blend of waxes, plus paraffin, which provides higher water resistance and sheen than Briwax Original. It’s a good polishing option for lacquer and other film finishes. Liming Wax creates a pickling effect when used on open-pored woods such as mahogany, ash or oak.
What is Staynwax water based?
The company’s Staynwax is a water-based sealer that comes in 16 oz. bottles in the consistency of thinned paint. It can be ragged, sprayed or brushed onto wood, then buffed to impart a smooth, velvety texture quickly and easily.
What is marble wax?
Marble Wax, a blend with a higher concentration of carnauba, is formulated to provide a water-resistant finish for marble and stone countertops and sinks as well as terra cotta or quarry tile. It buffs to a lower sheen but with more durability than softer wax offerings.
Where did Jack Bollom make his nail polish?
The two set out to manufacture women’s fingernail polish in England, but while the dyes and pigments were available, the country was fresh out of acetone. So much for fingernail polish. Instead, they bought linseed oil, set up shop in an old barn and started churning out a line of brightly colored house paints. The paint turned out to provide such a visual, emotional lift during the reconstruction of England that the Bollom Group flourished. As time passed, the company branched out into coatings for the film and textile industries, as well as fire-retardant paints.
How to contact Briwax?
Although the Briwax family of products is currently sold primarily through distributors, you can learn more about them and place an order by calling the company directly at 800-527-4929. And, within the next three to six months, their website ( www.briwax.com) will be expanded to offer easy, online ordering as well.
How long do you let Briwax dry before buffing?
Briwax can be used on floors of all types, including solid, engineered, or composite wood. It is not recommended for use on stone or marble.
Can you use Briwax on chairs?
Briwax is a popular brand of furniture polish. Also called furniture wax and furniture wax paste, Briwax is a paste-like substance that is applied to the furniture and absorbs into the wood. The wax is composed of a mixture of oil and waxes with a consistency similar to honey.
Does Briwax really work?
Briwax is a petroleum-based polish that is meant to be used on rough surfaces. It is made up of a special wax formulation that is designed to be applied to hard-to-reach areas. Briwax is always sold in a container that contains a brush similar to the kind of plastic bristles found in a toothbrush.
What is briwax used for?
I love using Briwax to stain and finish wood , especially pine. It leaves a beautiful touchable luster that enhances the natural character of the wood. It provides a lot of control over adding and removing color and is very forgiving of mistakes. With Briwax it is easy to layer colors and create depth and dimension that would be difficult to achieve with other stains.
How to stain wood with briwax?
How to Stain Wood: Step 2 Apply wax. Apply the Briwax with a soft cloth making sure that your skin is protected with chemical resistant gloves . The solvents in Briwax are aggressive and will eat through regular latex gloves quickly! My favorite method of Briwax application is to have the Wood and Briwax in the sun so that the wood and wax are warm.
How long does it take for wax to dry on wood?
Be careful not to remove the already applied darker wax. Allow to dry until the wax sets up and gets hazey. Usually 10-15 minutes.
Can you paint with briwax?
With Briwax it is easy to layer colors and create depth and dimension that would be difficult to achieve with other stains. However it does have drawbacks: Cannot be painted. If you ever want to refinish and paint a piece, the Briwax would need to be stripped.
Can you use Briwax to stain wood?
How to stain wood using Briwax for a fast, easy, foolproof finish. We used Briwax to enhance and accentuate the natural character and beauty of the two nightstand DIY tables. We built these tables out of pine which has a tendency to take stain unevenly which makes for a blotchy, streaky, cheap looking finish. Not at all what we had in mind for these gorgeous tables. We chose to stain our wood using Briwax for an all in one stain, seal, and protect finish that is fast, easy to apply, and gives you an old world hand rubbed finish.
