Why does an overcurrent trip device work faster?
What is the K line?
What does I.T.E. stand for?
What is a slate back breaker?
What frame is used for mains and ties?
Can a breaker line be bolted to a bus?
Can you interchange ITE breakers?
See 2 more
Are Siemens and ITE breakers the same?
In 1983 Siemens bought ITE (formerly known as Gould), a large electrical distribution company, so if you're looking to replace an ITE product, chances are you'll find exactly what you need from Siemens.
What brand breaker is compatible with ITE?
ITE-Compatible Circuit Breakers The Siemens type B115 breaker is a popular choice and can be used for a number of different types of panels. It's a 120-volt circuit breaker with a 15-amp rating. As a one-pole breaker, it can only protect one circuit in your house.
Are Eaton and ITE breakers interchangeable?
Eaton's UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.
Can you use Siemens breaker in ITE panel?
Luckily, Siemens makes new circuit breakers that can replace the old ITE breakers. The new Siemens breakers will either have the same ITE part number, or its own Siemens part number.
What does ITE mean on a breaker?
Inverse Time ElementThe name I.T.E. in itself represents the origin of the modern, resettable circuit breaker. I.T.E. actually stands for Inverse Time Element. This is the heart of every overcurrent trip device. When a fault occurs, it causes the breaker to trip faster as the rise in current increases.
What breaker is the same as Siemens?
Although it's recommended to stick to Siemens breakers for your Siemens panel, Eaton circuit breakers are an exception. They are designed to be interchangeable with Siemens breakers (which you can confirm on their compatibility chart).
What breaker is the same as Eaton?
Cutler-Hammer and the Eaton family of products are the same and compatible. Part numbers have not changed, just the Eaton name has been placed on the product. For more on the Cutler Hammer brand click here Cutler Hammer Brand.
Is Siemens the same as GE?
Are Siemens and GE Breakers Interchangeable? Will Siemens breaker fit GE panel? The answer is also yes. GE and Siemens circuit breakers are commonly known as a good match and interchangeable.
Are ITE breaker panels safe?
ITE Pushmatic electrical panels and circuit breakers do not have any proven design flaws that can cause a fire or shock hazard, but they are obsolete.
Are ITE breakers still made?
ITE Imperial is a defunct manufacturer of electrical distribution equipment. The ITE Circuit Breaker Company, named for the innovative oil-dashpot inverse time element on its electro-mechanical circuit breaker trip devices, was founded in the 1890's in Philadelphia, PA by the Cutter Electrical and Mfg. Co.
What breakers are interchangeable with?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter's Laboratory (UL).
Are circuit breakers interchangeable between brands?
The circuit load will determine the breaker size you need – and you'll need to make sure to get the right brand, as all breakers are not interchangeable.
How do you know if a breaker is compatible?
Circuit breakers have markings stamped on the side of them and are usually located inside the panel cover door. There is a label that will tell you what type of breaker is needed for installation in that particular panel.
What is a trip unit?
The trip unit is made up of two different switching mechanisms: a bimetal switch and an electromagnet. This circuit breaker has a maximum amperage rating of 15 Amps and a maximum voltage rating of 120 Volts. It is a single poled circuit breaker, so it can only provide protection for one circuit.
What is the maximum amperage rating for a B140HH?
At 40 Amps, the maximum amperage rating for the B140HH is higher than the B115. Its voltage rating is 120/240 Volts and is a single poled circuit breaker that protects one circuit.
What is the voltage rating of a B140HH?
At 40 Amps, the maximum amperage rating for the B140HH is higher than the B115. Its voltage rating is 120/240 Volts ...
What is a KB600?
KB600. The KB600 is a manually operated, fixed mount circuit breaker that is part of the Siemens/ITE brand. Because it is a manually operated circuit breaker, it requires an operator to charge the closing springs as no remote functions are present. It has a frame amperage rating of 600 Amps.
What is the ITE company?
The ITE electrical circuit company was one of the leaders in the electrical circuit manufacturing world. It produced a variety of circuits that can handle small- to medium-sized voltages and developed innovations such as the first 5 kilovolts air magnetic circuit breakers.
What is a B115?
The B115 is the most popular ITE/Siemens circuit breaker. It is a molded case, thermal magnetic circuit breaker. This concept means it has electrochemical trip units that protect it against excess currents. The trip unit is made up of two different switching mechanisms: a bimetal switch and an electromagnet.
Why use reconditioned breakers?
Using reconditioned breakers can decrease the number of unplanned facility outages. Reconditioning can also add new and updated technology that can add another layer of safety, as well as increase facility efficiency. Reconditioning electrical products , such as electrical appliances, involves ensuring the product continues to function as designed, ...
What is a Siemens breaker?
Siemens carries a wide variety of residential breakers but they also carry power circuit breakers for industrial strength applications.
Does Bay Power carry a Siemens breaker?
Bay Power carries a wide variety of Siemens circuit breakers and ITE circuit breakers both new and reconditioned. So if you’re looking for that hard to find ITE circuit breaker, chance are we’ve got it waiting for you.
What is the volt capacity of a Siemens breaker?
For example, Siemens’ type HV circuit breaker has a volt capacity of 5,000 and two different amperage ratings: 600 or 1,200. Their Type HK has a voltage rating of 7,500 and amperage ratings of either 1,2000 or 2,000 amps.
What type of breaker is used for a panel?
While many options for ITE-compatible circuit breakers exist, the best examples are going to be Siemens breakers. The Siemens type B115 breaker is a popular choice and can be used for a number of different types of panels. It’s a 120-volt circuit breaker with a 15-amp rating. As a one-pole breaker, it can only protect one circuit in your house.
What does ITE stand for in circuit breakers?
One reason you can tell ITE breakers have a history that goes all the way back to 1847 is simply the name itself. It stands for Inverse Time Element. More than 150 years ago, that may have seemed like a compelling name for a company that specialized in making circuit breakers.
How does an overcurrent trip device work?
However, nowadays, it’s just a simple explanation for how any overcurrent trip device works. When a fault happens, the breaker is designed to trip. The faster the current increases, the faster the trip happens.
What would ITE go on to produce?
ITE would go on to produce many distinct lines of air circuit breakers.
How is a circuit breaker broken down?
The circuit breaker line was broken down by the size of their frames and equipped with trip devices that went all the way up to the maximum amp capability of each design.
When did the ITE come out?
Nonetheless, the company behind this incredible stepping stone didn’t officially take the name ITE until 1928. At that point, the advancement had become so synonymous with the manufacturer that the name change became a foregone conclusion.
A Brief History of ITE
One reason you can tell ITE breakers have a history that goes all the way back to 1847 is simply the name itself. It stands for Inverse Time Element. More than 150 years ago, that may have seemed like a compelling name for a company that specialized in making circuit breakers.
ITE Circuit Breakers
ITE breakers have been among the most popular options since the widespread use of electricity became commonplace. The fact that these breakers – and ITE-compatible circuit breakers – remain so popular after all this time is a testament to their high-quality performance.
Using ITE Compatible Circuit Breakers
Despite the prominence ITE breakers once enjoyed, they are no longer manufactured. The problem is compounded by the fact that this earlier prominence means that many homes and commercial buildings were wired with ITE breakers, which are not interchangeable with most brands.
Relying on the Power of ITE Breakers
When reviewing the company’s history, it’s not hard to see why ITE breakers became so popular and were utilized across so many different applications.
What type of breaker is used for a panel?
The Siemens type B115 breaker is a popular choice and can be used for a number of different types of panels. It’s a 120-volt circuit breaker with a 15-amp rating. As a one-pole breaker, it can only protect one circuit in your house.
What does ITE stand for in circuit breakers?
One reason you can tell ITE breakers have a history that goes all the way back to 1847 is simply the name itself. It stands for Inverse Time Element. More than 150 years ago, that may have seemed like a compelling name for a company that specialized in making circuit breakers.
What is an ITE breaker?
ITE breakers have been among the most popular options since the widespread use of electricity became commonplace. The fact that these breakers – and ITE-compatible circuit breakers – remain so popular after all this time is a testament to their high-quality performance.
Why does an overcurrent trip device work faster?
This is the heart of every overcurrent trip device. When a fault occurs, it causes the breaker to trip faster as the rise in current increases. In other words, the higher the current, the faster the trip, consequently they work inversely to each other.
What is the K line?
The next major change in the product lines was the official “K-Line” series of breakers. The primary change from previous versions was the downsizing of the overall frame size to conserve space. A spring charged mechanism provided for faster closing and opening and reduced arcing and the “closed door draw out” design that not only allowed the breaker to be operated with the door closed but also “racked out” (disconnected) from the line and load side buss with the door closed for operator safety. This first generation of K-Line breakers became known as K-Line Black, because of the black plastic used as insulation on the poles and arc chutes.
What does I.T.E. stand for?
The name I.T.E. in itself represents the origin of the modern, resettable circuit breaker. I.T.E. actually stands for Inverse Time Element. This is the heart of every overcurrent trip device. When a fault occurs, it causes the breaker to trip faster as the rise in current increases. In other words, the higher the current, the faster the trip, consequently they work inversely to each other.
What is a slate back breaker?
The first of these lines, commonly known as the “slate back” breaker, came totally enclosed in a metal frame with a handle on the exterior of the door to safely operate the enclosed air circuit breaker. The breaker line could either be produced with breakers bolted to the line and load side buss or equipped as “draw out elements” that once opened could be safely removed from the cubicles without need for a buss, and major production, shut down. The product line was broken into specific frame sizes equipped with trip devices ranging up to the maximum amperage capability of each design:
What frame is used for mains and ties?
Large frame requirements still rely on the older KD-A and KE-A frames for mains and ties.
Can a breaker line be bolted to a bus?
The breaker line could either be produced with breakers bolted to the line and load side buss or equipped as “draw out elements” that once opened could be safely removed from the cubicles without need for a buss, and major production, shut down.
Can you interchange ITE breakers?
Even though the two production lines have similar model numbers and they have some parts that are interchangeable, the breakers themselves are NOT interchangeable between lines. This requires operators and maintenance personnel to be familiar with these differences when ordering ITE replacement breakers and parts for their switchgear. The personnel at NPE have developed a variety of ways to recognize these vintage changes to help guide customers to identify what they need. Among the questions that you may be asked when looking for these breakers is: What is the serial number? It turns out that the slate back product line has 4 to 5-digit numerical serial numbers and the steel back line all have a letter prefix (A through G) preceding these numbers. Depending on your requirements, internal parts changed even within the letter designations of these steel backs.
