why did my water dispenser stopped working

Common solutions for: My Kenmore refrigerator water dispenser's Not Working

1. Water Tube in Door is Frozen. To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through ...
2. Water Inlet Valve. The water inlet valve opens to supply water to the dispenser. ...
3. Low Water Pressure from House Supply. ...
4. Dispenser Control Board. ...
5. Dispenser Switch. ...
6. Door Switch. ...

Full Answer

What to do if your water dispenser stop working?

Troubleshooting your water cooler

• Water Cooler not dispensing hot/cold water (It’s room temperature) Option 1 – Check that your water cooler is plugged in at the wall socket and that the mains power is ...
• Weak water flow from bottled water cooler. ...
• Leaking water cooler. ...
• Leaking tap on water cooler. ...
• Water leaking from drip tray. ...
• Green stuff growing inside a water cooler. ...

More items...

Why is my fridge's water dispenser not working?

Common solutions for: Refrigerator water dispenser not working

1. Water Tube in Door is Frozen. To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through ...
2. Water Inlet Valve. The water inlet valve opens to supply water to the dispenser. ...
3. Low Water Pressure from House Supply. ...
4. Dispenser Control Board. ...
5. Dispenser Switch. ...
6. Door Switch. ...
7. Water Filter. ...

Why is my Frigidaire water dispenser not working?

Reasons Why Fridge Dispensing Ice, But Not Water

1. Failed Fill Valve or Water Inlet valve. Refrigerators that are connected to a water supply will also have at least one fill valve inside of them.
2. Frozen Water Line. There are several water lines inside your fridge. ...
3. Blocked Union Connector. ...
4. Low Water Supply Pressure. ...

How to fix water dispenser?

How to Repair a Water Cooler Dispenser

1. Unplug and Clean. Compare water dispensers on Amazon. Always unplug your water cooler dispenser before doing any repair or maintenance on it.
2. Reset the Water Cooler. Drain any remaining water and wipe dry. ...
3. Make Replacements. If any parts such as coils or spouts need to be replaced, try to obtain new ones for your specific brand and model from the ...

How do I fix my water dispenser?

2:093:59How to Fix a Leaking Water Dispenser/Water Cooler (It may be ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the quick fix to fixing most of cooler leaks would be to change the bottle. Taking out taking offMoreSo the quick fix to fixing most of cooler leaks would be to change the bottle. Taking out taking off the existing bottle. And putting on a new bottle uh in its place monitor it for about 24.

How do you reset water dispenser?

Option 3 – Try “resetting” your cooler by removing several cups of water from both the hot and cold taps and switch off the machine. Unplug it from the wall and leave for 24 hours before switching it on again. Give the water temperature about 5 to 6 hours to adjust before dispensing to see if it worked.

Why is water not coming out of my refrigerator water dispenser?

Water can stop flowing from the fridge dispenser when supply lines become frozen, clogged, or kinked. Some water lines run through the freezer, so if the temperature is set too low, the water line will become frozen. If there is ice in the line, allow it to defrost.

How do you fix a water dispenser valve?

0:492:25LG Fridge Water Dispenser Broken? Water Inlet Valve 5220JB2010AYouTubeStart of suggested clipEnd of suggested clipPull the panel off. Now remove the screw to release the inlet valve bracket from the frame detachMorePull the panel off. Now remove the screw to release the inlet valve bracket from the frame detach the wire connector. Pull out the retaining clip and release the outlet tube to remove the old valve.

Why is my Whirlpool water cooler not dispensing water?

Make sure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened. Check to make sure there are no kinks in the water supply line. A kink in the line can reduce water flow. Straighten the water source line to restore adequate water flow and pressure.

Can a water cooler be repaired?

Buy new parts to replace the ones that are malfunctioning. This is the most sanitary and safest method of repairing your water cooler if the above steps have not corrected the problem. When repairing your water cooler or replacing parts, be sure to consider what the cost would be to replace the entire cooler.

How much does it cost to fix a refrigerator water dispenser?

Cost to Repair a Refrigerator Water Dispenser You can expect to pay $175 to $500 to repair a water dispenser, depending on the issue.

How do I know if my refrigerator water filter is clogged?

8 Signs Your Refrigerator Water Filter Needs Replacing (& How to...1) Dispensed Water Tastes Bad. ... 2 Ice has an Odd Smell. ... 3) Slow Trickle of Dispensed Water. ... 4) Ice is Coming Out Small. ... 5) Black Specks in Water or Ice. ... 6) Water Filter Light Turns On. ... 7) Murky Appearance of Water or Ice. ... 8) It's Been More than a Year.More items...•

How do I unlock my refrigerator water dispenser?

1:094:13SAMSUNG FRIDGE: HOW TO LOCK/UNLOCK THE WATER and ...YouTubeStart of suggested clipEnd of suggested clipRight you hold it for three seconds. And you just need okay so all you need to do is once you doMoreRight you hold it for three seconds. And you just need okay so all you need to do is once you do that setting all right it's locked you see the water slash ice is locked.

Why would water not come out of faucet?

A frozen pipe can stop the flow of water to your home's faucets. If no water coming from tap, check if its connected pipe is frozen. If it is, try unfreezing it using a hairdryer to get the water flowing again. If your tap is still not working, contact your plumber to diagnose and fix the problem.

How do you replace a water dispenser switch?

0:281:55Whirlpool Refrigerator Dispenser Switch Replacement #2162361YouTubeStart of suggested clipEnd of suggested clipFirst pull out the drip. Tray. Now insert a putty knife behind the bottom of the dispenser facadeMoreFirst pull out the drip. Tray. Now insert a putty knife behind the bottom of the dispenser facade and push the facade down while using the putty knife to pull the facade. Outward.

Why does my ice maker work but not the water dispenser?

Frozen Tank or Tubing: The water reservoir tank or tubing could be frozen. If frozen, you would get water to the icemaker but not the dispenser. The water reservoir tank or tubing is typically located behind the vegetable drawers or on the left side of the fresh food compartment.

How do you troubleshoot a water cooler?

Water cooler troubleshooting Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

Why is my Primo water dispenser red light blinking but tank is full?

0:000:43Fix - Primo Water Dispenser Flashing Red Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we do is you open the bottom door. And push in on both hoses on each side of the water tankMoreSo what we do is you open the bottom door. And push in on both hoses on each side of the water tank and make sure the water tank isn't twisted to put stress on the hose.

How do you reset a Culligan water dispenser?

Replace the water bottle, and close the door to reset the dispenser. The dispenser will work again and the indicator light will turn off.

Why is my water dispenser not giving me hot water?

Ensure the hot switch is switched to the on position. Check that the machine has not been overused. The machine may need time to re-heat if it has had a high volume of usage. If your machine dispenses hot water throughout the day but not first thing in the morning, it may be in sleep mode.

How to fix a clogged water filter?

Fortunately, this is typically a simple fix. Most filters are visible inside the fridge. Simply unscrew the old one and twist in the new one .

What happens when you push a micro switch on a refrigerator?

When you push the micro switch, it activates a solenoid, which opens the valve that sends water to the door dispenser. If you can access the switch, test it with a multi-meter. Make sure to unplug the fridge first.

How long does a refrigerator filter last?

Most filters have a lifespan of a few months before you should change it out, just like a furnace filter. If you haven’t changed your filter in more six months , it’s probably time.

What is the inlet valve on a refrigerator?

The inlet valve allows water to flow from your home’s main water supply to the refrigerator. A couple of issues could cause problems with your water inlet valve. Make sure to turn off the water to the fridge before doing any detective work.

How to clean a fridge screen?

Debris can collect in that screen and limit the flow of water. Clean that screen with a toothbrush or try soaking it in distilled vinegar to loosen any stuck materials.

What is the plastic device that pushes water glass against?

In the water dispenser, the plastic device you push your water glass against is called the actuator. It can also be the source of your fridge’s issues.

Can a refrigerator freeze water?

The water line supplying the fridge can freeze in a few places. One is the ice cube maker in the freezer. Check the spot where the line dispenses water into the ice cube tray — you might notice a buildup of ice. If so, remove the ice cube maker and de-thaw the line with a hair dryer.

What does it mean when water doesn't come out of the refrigerator?

If it does, this means that the cool water reservoir is not frozen and chances are that the line that runs up the freezer door is frozen. If water does not come out, locate the reservoir inside the refrigerator (often located behind the vegetable crispers), to see if it’s frozen. Thawing out a frozen line can be done on your own, ...

How to check if water lines are clear?

If you’ve got a new fridge, check that the water lines have been cleared of air by keeping the water dispenser pressed for two minutes. You may want to avoid taking a shortcut here and just pressing the cradle with your hand – if the water suddenly starts coming out, you’ll end up with a bit of a splashy mess. Instead, just hold a cup beneath the dispenser as usual.

How to thaw out line running through freezer door?

To thaw out the line running through the freezer door, unplug the refrigerator and go over the section of line with a hair dryer set onto the warm or hot setting to unfreeze it quickly.

How to test if a refrigerator is getting electricity?

Test to see if it’s getting electricity by going around to the front of the fridge and pressing the water dispenser paddle. The voltmeter should go up to 120 volts.

How to tell if something is frozen?

It’s not too difficult to determine what, if anything, is frozen. Find the portion of the line that leads into the freezer door, and disconnect it. Then, press the water dispenser paddle and see if water comes out.

How to keep water lines from being bent?

Make Sure the Water Line Isn’t Bent and the Supply Is On. Okay, the first thing you should do is make sure that the refrigerator water dispenser isn’t locked. The function serves an obvious but convenient purpose, helping prevent spills and accidents from unintended use. Just make sure the lock button isn’t lit up, and if it is, ...

How many volts should a water meter go up to?

The voltmeter should go up to 120 volts. If the valve is receiving power, then a portion of the water line could be frozen. If not, it’s best to call a professional to help fix this for you.

What happens if a dispenser control board is faulty?

If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.

How to tell if a dispenser switch is defective?

To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.

What happens if a door switch fails?

If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it. Required Part.

What does a dispenser control board do?

The dispenser control board governs most of the functions of the dispenser system. If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board.

What happens if the water line in a freezer freezes?

If the freezer is too cold , the water line may freeze. 02 - Water Inlet Valve. The water inlet valve opens to supply water to the dispenser. If the water inlet valve is defective, or if the water pressure is too low, the water valve will not open.

What is the pressure of a water dispenser?

The home may have insufficient water pressure. The water inlet valve supplies water to the water dispenser. The water inlet valve requires a minimum of 20 psi to function properly. Check the water flow and test the pressure to determine if it is at least 20 psi.

How to tell if water line is frozen?

To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through it. If air does not pass through, this indicates that the water supply tube is frozen. If the water supply tube is frozen, thaw it out. In addition, ensure that the freezer is kept at the proper temperature. The freezer temperature should be kept from 0-10 degrees Fahrenheit. If the freezer is too cold, the water line may freeze.

Why is my fridge water dispenser not working?

If the water dispenser isn't working on your fridge, these are the common causes and how to get things flowing again. If at any point you get stumped or it seems like you need an advanced repair, contact an Asurion Expert for help.

Why does water stop flowing in my refrigerator?

Water can stop flowing from the fridge dispenser when supply lines become frozen, clogged, or kinked. Some water lines run through the freezer, so if the temperature is set too low, the water line will become frozen. If there is ice in the line, allow it to defrost. Follow the steps in our guide to cleaning your refrigerator water line to help determine if a clog is your issue.

What to do if your Asurion water supply is not working?

If there are no issues with the water supply system, you may need to take a look at a few other components. Malfunctions involving a faulty pressure switch, a water dispenser actuator, a refrigerator door switch, or a control board could be among your problems. You can inspect these components visually for damage or shorts or test the circuits with a multimeter. We recommend you reach out to an Asurion appliance repair expert to help you diagnose these problems and repair or replace these components.

What does it mean when your water filter is clogged?

A dirty or clogged water filter means less water can flow through the system. The good news: Replacing it is usually a straightforward process. Check your refrigerator's manual (it's usually available online) for instructions on how to replace your filter, including which replacement you'll need and how often to change it to prevent further issues . A dirty or clogged water filter can also cause a clog in your water supply lines—so after cleaning the filter, be sure to clean the water line.

How to test water inlet valve?

With the water line still disconnected and the power still off, locate the valve's solenoid coils. Disconnect the two wires from the terminals located on the coil. Use a multimeter to test the solenoid and see if it is running electricity steadily. If it isn't, it may need to be replaced.

Why isn't my water coming out of the dispenser?

If you are facing the problem of water not coming out from both the taps on your dispenser, it may be because of a faulty seal on a water bottle or an air-lock.

What to do if bottom loading dispenser is not working?

If this happens, unplug your dispenser, remove the bottle and check all the connections, make sure that the suction pipe is installed correctly and there is no air entering in the system .

Why is my Primo water dispenser leaking?

Primo dispensers are made of high-quality materials that usually never trouble you. If your dispenser is leaking, it is probably due to a leaking water bottle. If you have checked the water bottle for any leaks and the dispenser is still leaking water, it can be due to mineral build-up inside taps.

What is the best water dispenser?

Primo Water Dispensers are one of the best water dispensers available on the market currently. They are durable, economical and best suited for all your needs for home and office use. Primo water dispensers , if cleaned and maintained properly, do not have any issues in their working. However, over time some problems can disturb them.

How long does it take for a water dispenser to reset?

You can also reset your dispenser by removing a couple of liters of water from it and giving it 24 hours to settle down. Plug-in the dispenser and turn on the buttons, wait for 3-4 hours and then try again.

How to clean mineral build up on taps?

If there is any mineral build-up on the taps, you can use the old toothbrush to clean it off. For better results, dip the toothbrush in the mixture you have just prepared. Wash the taps with clean water after doing it. Now flush both the taps completely and waste the water.

Why is my water flow slow?

Water is Flowing Slow. If you are facing a slow flow rate, it is probably due to a mineral build-up inside the taps. You can use the same method we have described to solve the leaking problem to get rid of a slow flow rate. To solve related problems check at Best Bottom Loading Water Dispensers.

How to remove water dispenser from refrigerator?

Begin by turning off the water supply and unplugging your refrigerator. The dispenser control board is usually located on the freezer door and it’s where you select all the settings for your refrigerator. Remove the frame holding the control board in place, using caution to not break or crack the frame as your remove it.

What to do if water dispenser actuator is contacting switch?

If the actuator is contacting the switch, you will need to check the switch or control board for the source of the problem .

How to test water inlet valve on refrigerator?

How to test your refrigerator’s water inlet valve with a multi-meter: After disconnecting the water supply and unplugging your refrigerator, remove the rear access panel and locate the water inlet valve. It is usually found near the bottom of the fridge. Begin by inspecting all the tubing, and their respective connections, for leaks, damage, wear, ...

How many ohms should a water inlet valve put off?

A functional water inlet valve should put off a reading of 200 to 500 ohms.

What is a water dispenser actuator?

The water dispenser actuator is the mechanical part that activates the dispenser micro switch. It is normally a plastic lever that pivots when depressed by your water glass, and it may be covered with a soft plastic pad. You can usually hear a click when the switch is contacted.

What is the purpose of a water filter in a refrigerator?

If so equipped, the ice and water filter in your refrigerator is responsible for removing any debris or contaminants from your water that may remain after local water treatment. Most filters contain and are made up of carbon and a fabric filter. Over time the filter may become restricted and reduce or stop the water flow to the dispenser.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.