Why do towel rails have two valves? Your towel radiator has two valves to enable it to control the flow of hot water and the amount of heat it emits. One valve regulates the amount of hot water entering the towel radiator while the other controls the rate at which the hot water exits the radiator.
How many valves does a towel rail radiator have?
Since the bottom of your towel rail radiator has two valves, it is understandable if you're questioning why and what the valves are for.
What does the wheel head valve do on a towel radiator?
In contrast, the wheel-head valve controls the amount of heat the towel radiator emits. This valve on a towel radiator aims to regulate the radiator's temperature. Adjusting the wheel head valve counter-clockwise will increase the flow of water through the radiator, increasing its temperature.
How does a heated towel rail work?
A conventional heated towel rail or towel radiator is meant to be activated and deactivated by the central heating system. If the value of your rail radiator is fully open, the maximum amount of hot water will enter the radiator. This provides heat to the rail to reach the desired temperature for the entire central heating system.
Why are towel rail valves so bad?
Those towel rail valves seem to leak easily through their 'packing seal' which is just a rubber seal and probably the reason they are rubbish. EC1414 likes this. Always surprises me that motorised valves will plod away for 20 years without leaking yet radiator valves, gate valves and those screw isolators will leak on first use!
Why are towels warm?
Can towel radiators be on without heating?
About this website
Which valve is which on a heated towel rail?
There are two main types of heated towel rail valves. Straight valves should be used when the inlets are at the bottom of the towel rail and the pipes are protruding from the floor. Angled valves will be needed if the water needs to be diverted at a 90-degree angle.
What do the two valves on a radiator do?
Each radiator will have two valves. One will control the amount of hot water that enters the radiator and the other will balance the system by controlling how much heat comes out of your radiator. This is known as the 'lockshield valve'.
How do you open the valves on a towel rail?
0:363:15Radiator valves, which is the one to turn it off. - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil it moves no further when it stops you know it's off there go that's off now okay and back onMoreUntil it moves no further when it stops you know it's off there go that's off now okay and back on back the other way so anti-clockwise on clockwise off okay so there we are.
Should both radiator valves be open?
Both valves should be turned fully open (anti-clockwise) so that the water can flow freely through the radiator. The lockshield valve normally has a plastic cover over it and controls the flow of the water into the radiator.
Should heated towel rails be left on?
Heated towel rails are designed to be left on all the time and there are no safety issues to consider if you decide you want to keep them running. A standard heated towel rail will typically come on and off in accordance with the main central heating system.
How do you adjust the temperature on a heated towel rail?
The most common method for adjusting temperature will be to adjust the knob by turning clockwise to turn off - I.e. cool or anti clockwise to open and up the heat.
Where is the bleed valve on my towel radiator?
Locate the bleed valve which is usually at the top of the towel radiator. Wrap your rag around to make sure you have a good grip. Use your radiator key to turn it anti-clockwise. The air will escape with a hiss and then a small amount of water will come out.
Why is my towel rail always hot?
towel rail is on primary pipework,so it heats in summer to warm towls.
How do you use a dual fuel towel rail?
A dual fuel towel rail is extremely simple to use. It works the same way as your standard central heating radiator, but with an extra switch, making it easy to swap between central heating and element heating. To activate the central heating mode, turn the input valve anti-clockwise as far as it will go.
Should towel radiator valves be fully open?
Should the valves of the radiator be fully open? A conventional heated towel rail or towel radiator is meant to be activated and deactivated by the central heating system. If the value of your rail radiator is fully open, the maximum amount of hot water will enter the radiator.
Is it okay to close radiator valve?
Radiator valves, even though they have a handle, are not meant to be closed or half-open. Closing or opening the valve partially, will not control the heat coming from your radiator. Steam radiator valves must remain fully open at all times.
What happens if lockshield valve is closed?
A Lockshield valve is used to adjust how quickly a radiator takes before warming up – opening means more hot water flows through quicker whereas closing slows down the heating process, so things do not get too hot too fast.
Why does my radiator have two lockshield valves?
One valve accounts for the amount of hot water that enters the radiator. The other valve, referred to as the lockshield valve, balances the system by regulating how much heat the radiator gives off.
Should lockshield valve be open or closed?
You should open the Lockshield valve on the first radiator by one-quarter of a turn. Now open the Lockshield valve on the last radiator on your list. Each radiator in between should have its Lockshield valve opened slightly more than the previous radiator.
What position should radiator valves be in?
Turn valves clockwise to turn your radiator off and anticlockwise to turn it back on. Turning your radiators off is easy.
Does it matter which side of radiator flow and return?
Most modern thermostatic radiator valves are bi-directional – so can be fitted on either the flow or return pipe of your radiator. However, it's always best practice to fit the TRV on the flow pipe that enters your radiator.
Towel rail valves open or closed! | PlumbersForums.net
Hi I’ve just fitted a towel rail. Should both valves be open to fill it? And stay open once filled and bleed? Thanks
How to choose the correct heated towel rail valves
Towel rail valves – Explained. In this guide, our resident plumbing expert discusses the different types of Heated Towel Rail valves that are available and explains which one is best suited to your needs.
Changing towel rail valves over | DIYnot Forums
Both the valves are leaking on a towel rail (not the pipework) so need to replace them. Don't seem to tighten on removal of the cover. Not thermostatic, ten years old and presumably been cheap. I'm happy to attempt this and have located a drain valve for the combi CH system but can I just drain...
Why are towels warm?
Sometimes they are on the hot water cylinder with circuit, meaning the towels are warm if the hot water is being heated.
Can towel radiators be on without heating?
The towel radiator could be on without the heating but it would need to be teed off before the zone valves.