Why is my Indesit washing machine spinning with an unbalanced load?
Your Indesit washing machine has an in built feature to prevent it spinning with an unbalanced load. The appliance will try to redistribute the load to achieve balance, however, if it remains unstable the spin process will be aborted. This will minimise excessive vibration and prolong the life of your machine.
Why does my washing machine not spin when the lid is closed?
Top loaders have a device called a lid switch that signals to the washer when the lid is not properly closed. If your lid switch stops doing its job, your washing machine doesn’t spin, as a safety precaution. Fix: On the underside of the lid, you’ll find a small protrusion that activates the switch when you close the lid.
What should I do if my Indesit washing machine has no power?
In this instance, we would recommend removing the clothes, redistributing the load evenly and then reselecting a spin programme. If you need further assistance please call Indesit customer service on 0370 218 6615 My Indesit washing machine appears to have no electrical supply
How do you fix a front load washer that won’t spin?
Fix: Open the machine (for a front loader, wait till it automatically unlocks at the end of its cycle) and manually shift the contents around so they’re more evenly distributed Problem: It could be the positioning of the appliance itself that’s causing the spin cycle hiccup.
Why is my Indesit washing machine not spinning?
What causes a spin cycle to fail?
How to test drive belt on washing machine?
How to get your washing machine to wash more clothes?
Where is the drain tube on a washing machine?
Do carbon brushes need to be replaced?
See 1 more
What is the problem if the washing machine wont spin?
Here are a few common reasons a washer won't spin: The washing machine is too full. The load is improperly balanced. The washer itself isn't balanced correctly.
How do I get my washing machine to spin again?
0:543:23Washer Not Spinning - Motor Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clip1 power down the unit by unplugging the washer from the outlet. To wait approximately one minute andMore1 power down the unit by unplugging the washer from the outlet. To wait approximately one minute and plug the washer back into the outlet.
Why are clothes still wet after spin cycle?
Why are the clothes still wet? Well, this issue is either caused by the load not being able to spin fast enough or water not being able to drain, so it ends up back in the tub resoaking the clothes. If you are lucky, adjusting the washing load or changing detergents will solve the problem.
How do I reset my Indesit washing machine?
How To Reset Indesit Washing MachineSwitch off the power and unplug the machine.Turn on the machine using the on/off button.Set the timer control to the zero position.Plug the machine back in.Switch on the power.The display lights should now be flashing.Turn off the machine with the on/off button.More items...•
How do you fix a automatic washing machine that won't spin?
How To Fix A Washer That Won't SpinLighten the load inside the washer. ... Rebalance the load in the washing machine. ... Check or repair the washing machine drain hose. ... Check for blown fuses. ... Check the washing machine lid safety switch. ... Replace the drive belt in your washing machine. ... Replace the motor in your washing machine.
How do I reset my spin cycle?
1:173:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe power supply yikes brand is really in there unplug the power supply for about a minute. AfterMoreThe power supply yikes brand is really in there unplug the power supply for about a minute. After you waited for a minute or two you can go ahead and plug the power back in.
My indesit washer wont engage the spin cycle. It was spinn… - JustAnswer
My indesit washer won't engage the spin cycle. It was spinning yesterday, then I tilted it about 20 degrees back to clear the pump. After emptying the pump, it drains water successfully but now it won't spin.
Why Your Washing Machine Isn’t Spinning And How To Fix It
Why Your Washing Machine Isn’t Spinning And How To Fix It. September 3, 2015 | Laundry Appliance Repair, Help & Advice | No comments When it comes to your washing machine not spinning, it can occur either during the wash cycle (which is often discussed as the drum not turning) or at the end of the wash – when the appliance doesn’t perform the fast spin cycle.
What is the phone number for Indesit?
If you need further assistance please call Indesit customer service on 0370 218 6615.
What does it mean when your Indesit washing machine is not filling?
Indicates that the Indesit washing machine is failing to fill correctly. Check your fill hoses to make sure they are turned on correctly. It is also worth checking for any blockages, leaks or kinks in the fill hose pipe.
Why does my Indesit washer light flash?
The most common are: Pre wash light flashing. Indicates that the Indesit washing machine is failing to fill correctly. Check your fill hoses to make sure they are turned on correctly.
Why is my Indesit washing machine noisy?
f your Indesit washing machine appears noisy or unstable when using it for the first time it’s possible the installation has not been completed properly.
What is the phone number for Indesit washing machine?
If you need further assistance please call Indesit customer service on 0344 822 4224. My Indesit washing machine is noisy and unstable. If your Indesit washing machine appears noisy or unstable when using it for the first time it’s possible the installation has not been completed properly.
Why does my Indesit washer smell?
The most common causes are: Consistent washing at low temperatures – means that bacteria and undissolved detergents can build up, causing your machine to smell.
How to get rid of smell in washing machine?
You can also run a 90 degree service wash monthly using our Limescale & Detergent remover which will hygienically clean your machine, and prevent the smell reoccurring.
Does Indesit washing machine take conditioner?
Indesit washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.
Does Indesit washing machine spin?
Indesit washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin - drum doesn't move!- these faults can either be motor related, pump related, or there may be a problem with the printed circuit board. Indesit washing machine Does not take conditioner, ...
Why won't my washing machine spin?
Problem: As a general rule, a washing machine doesn't spin normally unless the laundry load has been drained of water. Problems with draining usually stem from a drainage hose that’s become either kinked or clogged with small items like coins or buttons from your clothing. Fix: For the first issue, unkink the hose.
Why won't my washer spin?
Top loaders have a device called a lid switch that signals to the washer when the lid is not properly closed. If your lid switch stops doing its job , your washing machine doesn’t spin, as a safety precaution. Fix: On the underside of the lid, you’ll find a small protrusion that activates the switch when you close the lid.
Why won't my spin cycle stop?
Problem: Your spin cycle won’t function as well – or at all – if the wash load is unbalanced. Generally, this happens when you’re trying to clean one or two heavy items, such as a comforter, bath sheet, or washable pet bed, and something clumps into a big, sullen lump. Interestingly, an unbalanced load can also cause the opposite problem, an ineffective spin cycle that won’t stop.
What happens if a washer pump fails?
A failed pump will result in the water not being able to drain out of the tub.
How does a washer pump work?
The pump on your washer moves the water in the machine into the drain hose, which enables the tub to fill. Once the water reaches the loop or the bend in the drain hose due to the pump’s action, it moves out of the drain.
Why won't my washer spin?
Another common reason a washer won’t spin is a faulty drive motor. Most washing machines have what is called a reversing motor. It moves one direction to spin and the reverse direction to agitate. Often, the motor will stop working in just one direction, meaning the machine might still agitate even if it won’t spin.
Why does my washing machine have a drive belt?
Your washing machine’s drive belt helps the motor power the spin of the drum by wrapping around the motor and a pulley wheel. If it slips off or breaks, the machine can still agitate during the wash cycle, but it won’t be able to spin.
What to do if your washing machine drum turns easily?
If the drum turns easily, it might be the drive belt. In that case, you should: Unplug the washing machine from the outlet. Then, you can open up the access panel (refer to your washer’s manual if you’re unsure where to find the access panel on your model).
What is a coupler on a washing machine?
The motor coupler on a washing machine is made of plastic and rubber, two materials that can wear out over time. This part is mounted to the direct-drive transmission and motor shaft of the washing machine.
Where is the lid switch on a washing machine?
Unplug the washing machine and locate the lid switch where the lid meets the cabinet of the machine.
Why is my Indesit washing machine not spinning?
Indesit Washing Machine Not Spinning. If your Indesit washing machine is not spinning, your first impulse might be to call a repairman. Before you do this there are a couple of things you should check. It could be that there’s actually no fault with the machine, and a few minutes of your time will save you the expense of an unnecessary call out.
What causes a spin cycle to fail?
There are a range of other faults that can cause spin cycle failures. Control modules, the pump or motor, or other parts could be the problem. In these cases, a professional washing machine technician will need to diagnose the fault and will then be able to advise you on how much the repair will cost and whether it will be a sensible use of your money.
How to test drive belt on washing machine?
You can test for drive belt problems by physically turning the washing machine drum yourself. Do this when the machine is switched off and disconnected from the mains. If there’s little or no resistance when you turn the drum you have a faulty drive belt.
How to get your washing machine to wash more clothes?
Redistribute the load. If there’s too much in the washer, remove a few items to spin out separately. If the load is too light add a few more clothes (even clean items!) to bring the machine up to the minimum washing weight recommended in your manual.
Where is the drain tube on a washing machine?
You’ll need to manually drain the machine. There’s generally a drain tube located behind the kick plate of the washing machine , this is easy enough to access once the plate is removed.
Do carbon brushes need to be replaced?
The brushes will need to be replaced. Carbon brushes aren’t expensive so this appliance repair is certainly cost-effective. It’s not a complex job but unless you’re competent and confident about working with electrical appliances you’d do better to call a repairman or at least an electrician.