What does dL mean on a washing machine?
The DL error code is found only on top-loading models of washing machines. The reason for this code is problems with closing the lid. The lid of the washing machine does not lock, so the system does not start the selected program. This may be due to one of the factors:
What does the error code F/dL mean on my Kenmore washing machine?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won't run at all. Common problems that result in this error code include:
What do the error codes on my washing machine mean?
These machines can now identify any fault in any part of the system and display the relevant error code on the screen. These error or fault codes vary from one brand to another. As a washing machine owner, you should have a list ready to identify the issues with your washing machine from the error code.
Why does the lid of the washing machine not lock?
The lid of the washing machine does not lock, so the system does not start the selected program. This may be due to one of the factors: stuck item; a faulty lock; damaged control board;
How dO I fix a dL error?
0:100:52[LG Front Load Washers] Explaining & Resolving A dL Error Code On A ...YouTubeStart of suggested clipEnd of suggested clipNext unplug the washer for 10 seconds. Then plug it back in and try to start the cycle. Again if theMoreNext unplug the washer for 10 seconds. Then plug it back in and try to start the cycle. Again if the dl error code persists the unit will require repair service please go to lg.com.
What does dL stand for in a LG washer?
A DL error on an LG washer indicates that the door lock switch doesn't work properly.
How dO I fix my LG Direct Drive washing machine?
To fix this:Press POWER, and turn the machine OFF.Unplug the machine.With the power being disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in.Power the unit back ON.Press-in on the door firmly.Select any cycle, and press START/PAUSE.
Why does my washer keep saying LD?
If Ld (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
How do I fix the dL on my washing machine?
According to this link, error code dl is a lid lock switch error. Here is a link which shows how to repair a lid switch assembly. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.
How do I fix the E dL on my washing machine?
Check the door. It may have a door lock issue even if it's closed. Typically the E DL error refers to a door lock problem. Open and close the door again.
Why won't my LG Direct Drive washing machine drain?
One of the most common reasons your LG washer won't drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won't drain or spin properly and water will be left behind.
How do I know if my LG washer drain pump is bad?
0:005:51OE Error Message / LG Washing Machine Drain Pump ReplacementYouTubeStart of suggested clipEnd of suggested clipAnd then when it wants to do the drain portion of the wash just open it up and drain it manuallyMoreAnd then when it wants to do the drain portion of the wash just open it up and drain it manually plug. It back up. Let it do its thing gets to another drain cycle drain it out manually.
How do I force drain my LG washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
How do you clear the LD code on a Whirlpool Cabrio washer?
Check Pump and Drain Hose Also, if it's poorly attached, use the drain hose form to secure it to the drain pipe and the tub. Remember to leave space between the hose and the pipe for ventilation. Then, press PAUSE/CANCEL to clear your washer's display. If the error persists, check for plugs in the pump.
How do I fix the LD code on my Maytag washer?
2:0317:09Repair Maytag Bravos HE sd ld Error Code Clogged Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd reach up in there and see if there's a wire or something that's blocking the impeller. On yourMoreAnd reach up in there and see if there's a wire or something that's blocking the impeller. On your pump well there's the impeller.
What does Ld mean on a dishwasher?
"LD" in the washer display indicates an issue with draining. If this display occurs and/or the washer is not draining: Verify the drain pump filter (where applicable) is clear (the filter is accessible through the door at the bottom of the unit).
How do I bypass the lid lock on my LG washer?
To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.
How do I use LG Smart Diagnosis?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
What does dL mean on Samsung washer?
Samsung F/dL - Door Lock Error A Door Lock Error occurs if the door cannot be unlocked. It will try to lock it 6 times before displaying the error.
What does dL mean on a Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
What does DL code mean on LG washer?
If you are an owner of the top-loading LG washer and your device indicates the DL code on its control panel, this means there are some issues with the proper closing of the lid. This code usually appears after the tank of the machine is filled, and all the processes just stop.
How to fix the DL Error?
To begin with, turn of your device for 10-15 minutes, then switch in back on, check the door for foreign objects and try to slowly close it again, waiting for the click sound, which signalizes that the lock closed properly. Press the Start button and see if the code is still displayed on the panel.
What to do if your control module doesn't get a signal?
So if the control module of your appliance doesn’t get a signal from the lock, the wires and connections should be changed and probably replaced. There might also be some issues with the control unit components, which can also be reinstalled. But sometimes the whole module has to be changed, this is why you need a specialist who is able to carry out a proper diagnostic.
Why is my water overfilling?
Water is overfilling due to a fault. It is better to close the water tap, unplug the machine and call customer care for help. PE. The water level sensor is malfunctioning. 1. If you can check the wire between the main control board and the water level pressure sensor for any damage or loosening. 2.
How to fix a clogged water hose?
1. Check the inlet hose that connects your machine to the tap. 2. Remove any clog or kink inside it and wash it thoroughly. 3. If the problem persists, replace the hose. OE. The issue in draining the water out. 1.
Can you change the water pressure sensor?
2. If the wiring is perfect, you may change the water level pressure sensor.
Can washing machines identify faults?
The Washing machines from popular brands have become quite smart, thanks to the advancement in their technology. These machines can now identify any fault in any part of the system and display the relevant error code on the screen . These error or fault codes vary from one brand to another.
Why do washing machines have lid locks?
Put simply, the lock is what prevents the lid from being opened during certain cycles of washing including the load sensing cycle and the spin cycle.
Why is the lid lock on my washing machine important?
The speed of a washing machine’s spin cycle is incredibly fast and can most certainly cause broken bones. This fact is why it is absolutely critical to have a lid lock function on your washing machine. This feature is especially useful for households with children.
How to bypass lid lock on washer?
If you’re unsuccessful with the magnet method, you can bypass your washer’s lid lock function by cutting the wires connected to the lid lock switch itself. Make sure that your washing machine is turned off, the water supply is disconnected, and you’ve gained access to the lid lock switch. Then, proceed with the following steps:
How to open and close a Whirlpool washer?
Place a small magnet between the lid lock switch and where it fits into the unit. This action should release the switch, allowing you to raise your Whirlpool washer’s lid. Consider taping the magnet in place to be able to open and close your washing machine during regular use.
How to bypass lid lock on Whirlpool washing machine?
The first step in bypassing the lid lock function on a washing machine, the Whirlpool brand included, is to turn off the washing machine and disconnect it from the power source. Do not proceed until you’ve confirmed that the appliance is completely unplugged from the socket.
What does the lid lock do on a washing machine?
Not to be confused with the lid switch feature, which prevents the washing machine from operating when the lid opens, the lid lock does exactly as it sounds. It locks the washer’s lid into place during cycles. The lid lock function primarily exists as a safety function and can come in handy.
How many wires are needed for a washer lid lock?
Most washer’s lid lock switches are powered by three or four wires. These are the ones you’ll be cutting. Cut the wires that relate to the lid switch and lid lock component. Using sharp scissors or a pair of pliers, snip right through the center of each corresponding wire.