why is my check engine light on in my chevy traverse

Below is a list of the most common reasons your check engine light can come on:

More items

Full Answer

What are common problems with Chevy Traverse?

Most Common Problems in Chevrolet Traverse

• Seat Problem. ...
• Transmission Error. ...
• Issue with The Windshield. ...
• Liftgate Closes Suddenly. ...
• Buckle Failure in Front Seat Belts. ...
• Inaccurate Reading of Fuel Gauge. ...
• Inflation Problem in Front Seat Airbag. ...
• Failure of Parking Brake. ...
• Fire in The Hood. ...
• Defect in Goodyear Tire. ...

What are the problems with Chevrolet Traverse?

The problems associated with this plate going bad include:

• No Reverse
• Harsh shifts in 3rd and 5th gear
• Slipping transmission in-between shifts

What engine is in a Chevy Traverse?

Unlike models from the halcyon years, ‘RS’ might still stand for Rally Sport but no longer promises anything extra under the hood. The 2022 Traverse is offered with a single powertrain option, showing up as a naturally aspirated 3.6L V6 engine rated at 310 horsepower 266 lb-ft of torque.

How to change a dome light in a Chevy Traverse?

How to Change a Dome Light in a Chevy Traverse

1. Park the Traverse. Turn off the interior light switch. ...
2. Use a flat-head screwdriver to pry off the dome light cover. Place the screwdriver on the side of the lens and push.
3. Remove the bulb by gently pulling it out of the socket and discard it.
4. Install a replacement dome light bulb. Align the bulb with the socket and push the bulb into place. ...

Why is my engine light on in my Chevy Traverse?

CHEVROLET Traverse Check Engine Light Flashing Other mainly common reasons for a Check Engine Light are faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, damaged emissions control part, or damaged spark plugs to name a few.

What is the most common reason for check engine light?

Oxygen Sensor A faulty oxygen sensor will return a check engine warning every time. In fact, it's one of the most common reasons why a check engine light comes on while you're driving your automobile.

Will it damage my engine if I drive my vehicle with the check engine light on?

The check engine light means there's a problem somewhere in your emissions system. Regardless, you're safe to drive for now as long as the car isn't performing strangely. Just have the check engine light checked and the problem repaired.

Should I be worried if my check engine light is on?

Unlike a Temperature or Oil Pressure light, a Check Engine light is usually not an urgent, “Stop right now or you may cause permanent damage!” type of situation, unless it is flashing. If the check engine light is flashing, a more severe problem has occurred.

What does a solid check engine light mean?

A solid Check Engine Light can mean something like a loose gas cap, or it can indicate a more in-depth problem like a fuel, timing, or transmission issue. Get your car diagnosed, although the urgency isn't the same as if the light was flashing at you.

Why is my engine light on but nothing seems wrong?

If nothing seems to be acting strange, then it is probably safe to drive it until you can get it into a mechanic. Sometimes the light may come on after fueling if the gas cap is a little loose. Or it could mean your catalytic converter needs to be inspected.

Can an overdue oil change cause check engine light?

Oil changes are essential maintenance for your car but it won't do anything that could trigger your check engine light to come on.

What does yellow check engine light mean?

investigate the problemOn some cars, a yellow check engine light means investigate the problem and a red one means stop right now. Try tightening your gas cap. This can often solve the problem. Keep in mind that it may take several trips before the light resets. Some vehicles have a separate indicator that warns of a loose gas cap.

How long can I drive with a check engine light on?

If your Check Engine light comes on for any reason, it's still possible to drive your vehicle, but it is only recommended to drive another 50 to 100 miles before scanning your car's computer for error codes. This process allows you to identify the issue at hand and address it as you see fit.

What is the first thing to check when the check engine light comes on?

1) Check your gauges – Look for an indication of low oil pressure or that your vehicle is overheating. If either of these issues are present, turn your vehicle off to prevent any further damage. 2) Inspect the condition of the battery and charging system – If you lose power from the battery, your vehicle will die.

Can AutoZone check engine light?

Does AutoZone Scan Check Engine Lights? AutoZone can diagnose Check Engine Light codes, yes. If your engine light turned on and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service.

What does orange engine light mean?

Amber engine management light An orange or amber light is the least serious. If this light comes on and persists, it means that you should be able to keep driving as normal, but take your car to be looked at by a garage as soon as you can.

What does a yellow check engine light mean?

On some cars, a yellow check engine light means investigate the problem and a red one means stop right now. Try tightening your gas cap. This can often solve the problem. Keep in mind that it may take several trips before the light resets. Some vehicles have a separate indicator that warns of a loose gas cap.

Can check engine light turn itself off?

A check engine light will shut itself off if the condition that caused it is remedied. So, if your converter is marginal, and you did a lot of stop-and-go driving, which creates high demand for the converter, that may have turned on the check engine light.

How can I get my check engine light to go off?

0:143:01How To Reset The Check Engine Light-EASY And FREE - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt completely disconnected from the battery. And leave it off for about a minute if you want to beMoreIt completely disconnected from the battery. And leave it off for about a minute if you want to be extra safe leave it off for two minutes. But about one minute should be enough for most cars.

How many miles can you drive with check engine light on?

50 to 100 milesDrive for 50 to 100 miles (80 to 160 km). Take several individual trips until the system reads the status of all the components once more. “Several trips” means you shut off the engine and start another trip each time. Therefore, it's not just 100 miles in one trip.

Why does my check engine light flash on my Chevy Traverse?

If the check engine light in your 2019 Chevy Traverse starts flashing, that means that the problem needs prompt attention and your Chevy should be brought in quickly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is glaring, please contact our team of automotive advisors at Hare Chevrolet urgently by calling 3173336958. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.

How long does it take for the check engine light on a 2019 Chevy Traverse to go off?

In most cases, your 2019 Chevy Traverse light will go off after about 20-40 miles.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we endorse that you pull over and contact Hare Chevrolet to aid pick if your automobile is safe to commute in or if we endorse a tow truck. Since each check engine code has its have level of severity, it is involved to predict how many miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

How much does it cost to get the engine light checked?

The central cost for a check engine light diagnosis & testing is frequently between $88 and $111. The great news, Hare Chevrolet offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more important failure identical a bad catalytic converter or a problem with one of the car's oxygen sensors, so it great to get the cooperative code reading and diagnosis.

What happens if I don't replace my O2 sensor?

So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Chevy Traverse's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the prudent assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

Why is my Chevy Traverse having trouble starting?

If your Chevy Traverse is having trouble starting, idling rough or has a nimble change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

What is onboard computer on a 2019 Chevy Traverse?

Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Chevy Traverse. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few.

What does a check engine light mean on a Chevy Traverse?

A flashing check engine light is your Chevy Traverse’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.

Why does my car have a check engine light?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Traverse’s ignition system or fuel system (as stated above), there are other issues that can cause it.

Why does my check engine light flash?

The ignition system is the most common reason that the check engine light will flash. The ignition system consists of spark plugs, plug wires, and the ignition coil packs (older vehicles have a distributer that has the same function as coil packs). These parts work in concert to ignite the fuel in the combustion chamber at just the right time.

What happens when the cam sensor is not being read?

Crank/Cam Sensor- When the cam or crank sensors are not being read by the ECM/PCM, it’s impossible to get the ignition timing right. If you Traverse does start at all, it’ll run rough.

Why does my Chevy Traverse run so lean?

Fuel System Issues. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Chevy Traverse’s fuel system can often cause the engine to misfire. It can run too lean or rich. Alternatively, there may not be enough fuel for proper combustion, or the fuel isn’t atomizing properly.

Can a bad fuel injector cause a misfire?

Injector Issues: A bad fuel injector (s) can cause a misfire. If the fuel can’t atomize properly, the engine will misfire. Here’s a good article on how to diagnose whether your fuel injectors are bad from procarmechanics.

Why does my car have a faulty oxygen sensor?

A faulty oxygen sensor can cause your vehicle's computer to supply the engine with too much or too little fuel. An engine with too little fuel is at risk of total engine failure, and an engine with too much fuel will create excessive smoke and odor.

What is a faulty mass air flow sensor?

Faulty Mass Air Flow Sensor: When exposed to dirty or particle-rich air, the Mass Air Flow (MAF) sensor could fail. Like the oxygen sensors, the MAF sensor measures the amount of air entering the engine and help ensure the proper air-fuel mixture. A faulty MAF sensor can cause your engine to misfire, ultimately causing poor fuel economy, performance, and potentially more unnecessary damage to your engine.

What happens if a catalytic converter is clogged?

A failing or clogged catalytic converter can severely impact fuel economy and vehicle performance.

How many miles does a 2016 Chevy Traverse have?

We purchased our 2016 chevy Traverse new and now have approx. 38k miles on it. After the 1st year, we began experiencing power loss issues and ended up having fuel injectors replaced in mid-2017. Since then, we've been experiencing the same issue that has already been reported to the NHTSA by other owners. Periodically, our "service stabilitrak" will appear on the dash and the "traction control off" will appear, along with the "check engine light". When this happens, the vehicle runs extremely rough and violently shakes back and forth. I've had the vehicle into autonation chevy in both gilbert, az and mesa, az for a total of 5 times since mid-2017 for this issue. I just picked it up a few days ago after being in the shop for over 2 weeks. Unfortunately, no repairs were made as no codes were found/stored in the computer and the mechanic was unable to replicate the issue during the 2 week period. This is clearly a safety issue and I'm a bit surprised no resolution has been made given the complaints regarding this issue just in 2018. This has occurred while driving, while idling and while waiting to turn in a busy intersection and almost led to an accident. I will be taking the vehicle back to autonation once again today. Gm/chevy please review and offer guidance as to what's going on before fatalities occur. Thank you.

What happens when you drive with no warning?

While driving with no warning the check engine light comes in, the dash flashes service stabiltrak, traction control off and engine power reduced. The vehicle slows down to 25 mph and if you try to speed up it shutters and bucks. I have to pull over and return it off and then when turning it back on the check engine light stays on for about a day but other warning lights are gone. This has happened three times and I have almost been hit every time, because the vehicle just slows itself down to 25 mph with no warning while you are driving.

Why does my check engine light come on?

If your check engine light goes off automatically, it was just picking up the fumes from your gas tank. If your check engine light comes on at the same time that you start to experience another problem–like an overheating vehicle–it’s best to pull over as soon as possible.

What does it mean when you see a check engine light on your dashboard?

Seeing the check engine light on your dashboard almost always means that it’s time to schedule service. However, if you think that your check engine light is coming on by mistake, or if you’ve dealt with the problem and the light won’t go off, we wouldn’t be surprised if that little light started to get on your nerves!

How to reset check engine light?

On some models, turning the car on and off several times may be enough to do the trick. Start the car, let it run for one second, and then turn it off. Let the engine sit quietly for two to three seconds, and then repeat the whole process two more times.

What happens if your check engine light goes off?

If your check engine light goes off automatically, it was just picking up the fumes from your gas tank. If your check engine light comes on at the same time that you start to experience another problem–like an overheating vehicle–it’s best to pull over as soon as possible.

Can you reset the check engine light if the gas cap isn't working?

If the gas cap isn’t the problem , don’t try to reset your check engine light until you’ve had the problem looked at. Although you may find a Chevrolet diagnostic tool available for sale, most drivers will want to talk to an expert before making any moves on their own.