How do you fix a GE washer that won't drain?
GE Washer Not Draining? Here is Why.Check the water level control knob.Check the drain pump filter.Remove any kinks in the hose.Check the Pump, Replace if it is Faulty.RINSE light is flashing (For Newer Models)Check Lid Switch.Check the Drive Belt.Aug 24, 2021
How do I force my GE washer to drain?
There may be a clog.Press Start to resume the cycle or you can select Drain & Spin and press Start. ... If water remains in the washer, check for a pinched or flattened drain hose. ... If you clear a clog, press START to resume your cycle or you can select Drain & Spin and press Start.More items...
Why won't my GE washing machine drain and spin?
Doesn't Spin When a load is properly balanced but still won't spin, there may be an issue that prevents the water from draining from the machine. Make sure the drain hose is properly connected and that there are no kinks or pinched areas. Your washer may not drain and enter the spin cycle if the pump filter is clogged.
What causes the washing machine not to drain?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
How do you manually drain a GE washing machine?
Here's how to do it.TURN OFF THE POWER. Unplug the washing machine from the power outlet.REMOVE LAUNDRY. Take out any clothing that's in the washer tub.EMPTY THE TUB. Use a bucket to scoop the water out of the washer tub. ... MOVE WASHER AWAY FROM THE WALL. ... DISCONNECT DRAIN HOSE. ... PINPOINT THE ISSUE.
How do I get my GE washer to drain and spin?
If the washer is running, press the "Start/Pause" pad once to interrupt the cycle, then select "Drain and Spin" and press the "Start/Pause" pad again. If the "Stop" pad has been selected and the washer is still full of water, select "Drain and Spin" and then press "Start".
Where is the drain pump on a GE washer?
The drain pump is situated at the bottom of your washer. To remove the faulty pump, first disconnect the wire harness from the pump motor. Next, use a 3/8″ socket and ratchet to take out the bolts holding the pump in place. After the bolts are out, remove the two hoses attached to the drain pump.
How do you test a GE washing machine drain pump?
0:522:51Front Load Washer Won't Drain - How to Test the Drain Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipI set my meter to volts EC turn the washer to the drain spin cycle that way when you start the firstMoreI set my meter to volts EC turn the washer to the drain spin cycle that way when you start the first thing that's going to happen it's going to try to drain.
How do I know if my washing machine drain hose is clogged?
Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer's drain is most likely the issue. The amount of time it takes for the standpipe to fill up and overflow helps you diagnose where the clog is located.
Why does water stay in washing machine drum?
Water In Bottom of Washing Machine Drum: Why It Happens Your lid mechanism is broken or not engaging fully. Your drain or hose is clogged. Your load was too large for a good spin cycle. Your washing machine's sensors are damaged or old.Aug 24, 2021
Why does my washer sound like it has water in it?
This is an enclosed plastic container partially filled with a salt water solution, it is attached to the inner clothes basket, and allows the basket to spin smoothly should an out of balance situation occur. This is a normal sound.
Watch out the video guide for a top load GE washer not draining
GE’s washer may have a clog in the hose, filter, or pump, which can cause the washing machine not to drain.
Frequently Asked Questions
One method to force a GE washer to drain is to turn the power off. Open the door and place a bucket or container beneath the drain. Turn on the water so that it runs down from the drum through the trap into the container.
Conclusion
This article has gone through the most common reasons why your GE washer won’t drain.
What to do if your washer is clogged?
If the washer drains properly, then the clog has likely cleared. If water remains in the washer, check for a pinched or flattened drain hose. You may even need to disconnect power to the washer and remove the drain hose from the back of the machine and the plumbing to see if there is a clog inside the drain hose.
What does it mean when a washer makes a sloshing sound?
Water sloshing sound: If no water is visible in the basket but you hear a "sloshing water" sound, the washer's balance ring is most likely making the sound. The balance ring is an enclosed plastic container partially filled with a saltwater (brine) solution that is attached to the inner clothes basket. It allows the basket to spin smoothly ...
How long should I wait between cycles on a washer?
Pauses: If your washer is not draining, wait a few minutes. For many models, it is normal to have pauses between cycles of up to 3 minutes. If you have a manual dial for the wash cycle selection on the control panel, do not manually advance the dial/timer if it is pausing after agitation. If you advance the dial manually, ...
The Top Load Issue
When your top load GE washing machine doesn’t drain, there are some possible reasons. You should check the following situations:
The Front Load Issue
Here are some causes and also solutions for the front load GE washing machine won’t drain issue.
Load Imbalance
If one side of your washer seems to be more heavily weighted than the other, a load imbalance can occur which will stop the LG washer from spinning.
Level the Washer
If left unleveled, your washing machine won’t operate at full capacity and efficiency. If you suspect an unevenly balanced washer, check for other warning signs: excess noise and vibration during the wash cycle.
Master Reset
If the machine doesn’t spin, you have two options: you can reload the machine and run another cycle, or you can drain the machine and perform a master reset.
Clogged Drain Trap
Front-load washers are known for their ability to clean a large amount of laundry without wasting water. Unfortunately, they also collect more lint during the washing process than top-load machines do.
Check the Lid Switch
The lid switch on top-loading washing machines is located under the main lid. The lid switch is used as a safety device that prevents the machine from operating when the main lid is open. When the lid is open, the machine stops.
Check Water Level Control
First, unplug the washer and unplug the wires connected to the control. Then, using an ohmmeter, check continuity in these areas.
Check Water Pump
If your washing machine won’t spin but will still agitate, there’s probably a good chance that the water pump is a problem. The pump is responsible for pushing the water out of the drum so your clothes can spin and redistributing the water throughout the wash.
