Many times a flashing light on your hot tub is an easy fix, so before you start to worry follow the steps below to troubleshoot the issue.
- Ensure the hot tub is heating. If the hot tub is not heating, the light is blinking because the water temperature has dropped more than 2 degrees from the set temperature. ...
- The type of sanitation system your hot tub is equipped with will determine the next actions to take. ...
What does it mean when your hot tub light flashes red?
For example, a red flashing light may indicate a hi-limit trip, a dirty filter, or a stalled circ pump. Meanwhile, a green flashing light often indicates an error with the hot tub’s sensor. Additionally, if both red and green lights are flashing, the hot tub is likely experiencing low flow.
What should I do if my hot tub filter light is flashing?
Remove the filter (s). Leave the tub powered off for 1-2 min. Then, power the tub back on and leave the filters out of the spa. If the light is still flashing, please call to schedule a visit with a technician. If the light stops flashing you will want to clean your filter in a soaking solution or replace depending on the age of the filters.
Why is the water in my hot tub too high?
However, if water begins to climb beyond this temperature, it is likely the high limit switch is faulty. In order to test the switch, users should first ensure that the hot tub’s thermostat levels have not been altered causing a change in temperature regulation.
What do the indicators on my hot tub mean?
For instance, the power indicator turns on when the hot tub is sufficiently powered, the ready indicator flashes when the hot tub’s temperature is within its set limits, and the clean indicator lights up and remains on throughout the entire cleaning cycle when the clean button is pressed. I'm Adnan Sabanovic, the guy behind Hot Tubs Report.
Why is my hot tub light blinking?
If your heater high limit has tripped, this could mean the water in the hot tub is hotter than the acceptable temperature range or low flow and circulation, meaning your filters are clogged. Should your blue light be blinking, it typically means your high-heater thermostat tripped.
Why is my Hot Springs hot tub blinking?
1:294:59troubleshooting Hot Spring tub blinking LED - YouTubeYouTubeStart of suggested clipEnd of suggested clipMight be a bad high limit sensor. There's a sensor that senses the water coming in there's a sensorMoreMight be a bad high limit sensor. There's a sensor that senses the water coming in there's a sensor back there that senses the water going out if you have a bad high limit sensor that could be the
How do I reset my hot tub heater?
1:112:01How to RESET your HOT TUB - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd don't just turn it right back on you got to give it 30 seconds. Give the software give the logicMoreAnd don't just turn it right back on you got to give it 30 seconds. Give the software give the logic. Some time to actually reset. Wait 30 seconds flip your breakers.
How do you clear the error on a hot tub?
0:072:26Fix a Flow Sensor Error on Your Hot Tub and Fix Your Spa Not HeatingYouTubeStart of suggested clipEnd of suggested clipTurn your spa off and put the filter in finally turn your spa back on again and run your jets for aMoreTurn your spa off and put the filter in finally turn your spa back on again and run your jets for a few minutes. This should remove any air that's in your lines.
What are the codes on a hot tub?
Hot tub error codesCoLd : Temp in heater housing is below 40° F. ... OH : Overheat. ... HLoH : Hi Limit Over Heat. ... SEoP : Sensor open or disconnected. ... SESH : Sensor short, nonfunctional. ... PSoC : Pressure switch open with circulation pump.PSoL : Pressure switch open with low pump.PSoH : Pressure switch open with high pump.More items...
How do you diagnose a hot tub problem?
0:025:265 Common HOT TUB PROBLEMS and Solutions | Swim UniversityYouTubeStart of suggested clipEnd of suggested clipSo number one is that your hot tub won't heat properly. So why is that well it simply could be yourMoreSo number one is that your hot tub won't heat properly. So why is that well it simply could be your heater element. If that's not the problem it could be low flow from your pump.
Why my hot tub won't heat up?
Low flow in your spa or hot tub is most commonly associated with a dirty spa filter. If your spa heater won't heat, remove and clean the filter(s) to rule out a pressure or flow rate problem. Low water level, a clogged pump impeller, closed valves, clogged pipes, or blocked spa drain covers can also cause flow issues.
How do I reset the control panel in my hot tub?
You can reset a hot tub control panel by switching it off, waiting for between 10 and 20 seconds and then switching it back on again. If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is.
How do you know if your hot tub heater is bad?
To test if a bad heater is causing your tripped breaker, you can disconnect the copper tabs (or wires) from the spa pack to the heater element. Once disconnected, turn the power back on. If the breaker stays on, you've determined that the heater is bad.
Is there a reset button on hot tub?
Most hot tubs are fitted with a reset button in the event of overheating or a power surge. The button is typically located on the side of the control box behind the hot tub's removable panel on the front side.
Why is my hot tub flashing Flo?
The most common reasons for the FLO error message are dirty filters, a low water level, clogged circulation pumps or bad sensors. The first thing you should do is check your tub's water level. Top it off and see if this fixes the problem. Reset the tub GFI breaker to see if the error clears.
Why is my hot tub control panel not working?
If the control panel is frozen or dead, you have to check if the problem is the control panel or the circuit board. Examine if there is moisture in the display. Check if there are cracked buttons or if a part is wet. If only a part is not working, look for error messages or blinking lights.
How do I reset my hot springs hot tub remote?
0:041:04How To Reset a wireless Hotspring Highlife series control panelYouTubeStart of suggested clipEnd of suggested clipAnd you got to hold it there for a little while. And it will go black on you. And then eventuallyMoreAnd you got to hold it there for a little while. And it will go black on you. And then eventually you will start seeing where it's searching for the.
Why is my hot tub blinking yellow?
0:152:19Flashing yellow light Limelight - YouTubeYouTubeStart of suggested clipEnd of suggested clipLight here in the front of your spa is flashing yellow. Now if it's flashing yellow it's a saltMoreLight here in the front of your spa is flashing yellow. Now if it's flashing yellow it's a salt water system issue so what you want to do is check your salt levels.
Why is my Hot Springs spa not heating?
While having a piece of equipment fail like a heater, circulating pump, or part of the control system can be the cause of your hot tub not heating, they aren't as common as you might think. The number one reason we see no heat calls is that there is a flow issue that can be easily fixed by the customer.
How do you reset the high limit switch on a hot springs spa?
The High Limit Switch Needs to Be Reset or Replaced Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.
Why is my Hot Springs hot tub flashing?
The power indicator will flash red if the high limit has tripped. If the tub is above its temperature limit, the filters are not working. You will need to call for service if you see the red flashing lights.
How do I know if my hot tub has an airlock?
The most obvious sign that your hot tub has an air lock is if the jets don’t work. There can be nothing coming out of your jets when they are turned on.
Why is my hot tub light flashing?
For example, a red flashing light may indicate a hi-limit trip, a dirty filter, or a stalled circ pump.
Why is my hot tub overheating?
Overheating of a hot tub can happen because the pump has been running for some time due to extended filtration cycles settings or faults within...
How do I reset my hot tub control panel?
A hot tub’s control panel can be reset by manually turning it off and waiting between 10 and 20 seconds before turning it back on. It is crucial to wait the full 10 to 20 seconds in order to allow all of the data to clear from the panel.
How do you diagnose a hot tub problem?
There are 5 common problems that may cause a hot tub to malfunction including an inability to heat up, fluctuating water temperatures, faulty jets, an error code displayed on the control panel, a loud pump, or the GFCI breaker tripping.
Why is my hot tub green?
Additionally, if both red and green lights are flashing, the hot tub is likely experiencing low flow. However, many hot tubs also contain lights that also blink but are not used to indicate any issues.
What to do if your hot tub control panel is not working?
If the control panel still is not working, users can turn it off overnight in order to allow the hot tub to fully reset. Finally, users should make sure that no buttons are damaged on the control panel. If problems persist, the control panel may need to be fully replaced, and it is wise to call on an expert for help.
How to unlock the control panel on a hot tub?
So, in order to unlock the control panel, users should find and press the “Time” button located on the hot tub’s operating panel. Then, the “Jets 1” button should be pressed followed by the “Set Down” button . From this point, an “O” will appear to indicate that the control panel has been opened or unlocked.
What does yellow light mean on hot tub?
What Does A Flashing Yellow Light Mean On My Hot Tub? A yellow light is a little different from the other light colors you may see flashing on your hot tub. Knowing what to do will help you get the issue solved correctly to keep your hot tub running optimally.
What to do if your tub is no flow?
If the message mentions No Flow, power the tub down and remove your filter (s). Power the tub back on leaving the filter (s) out. If the light stops flashing, the filters are dirty or beyond their usable life and need to be cleaned with a filter cleaner product or replaced.
Why do you cover a hot tub?
Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature.
What causes a spa filter to be dirty?
Filters are dirty. Excessive buildup of oils and organic matter. Improper sanitation. Suspended particles or organic matter. Overused or old water. Clean the filters. Shock the spa water with sanitizer. Add sanitizer as your owner’s manual recommends; adjust the pH and/or the alkalinity to the recommended range.
How do I keep my spa in tip top shape?
Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs. Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.)
Why do you need a hot spring spa?
Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements.
How to remove scale from hot tub?
To remove the scale, drain the spa water, scrub off the scale, refill the spa, and balance the water. Contact your dealer for tips on how to prevent future scale buildup. Remember to exercise caution when attending to your hot tub’s mechanical and electrical parts.
How to remove scum from a spa?
Wipe the scum off with a clean rag; if the layer of scum is heavy, drain the spa and use a spa surface and tile cleaner to remove the scum before refilling the spa. Contact your dealer for cleaning recommendations and tips to prevent future buildup. Algae growth. High pH.
When to start thinking about spa maintenance?
The best time to start thinking about spa maintenance and repair options is before you even purchase your hot tub. When you buy a hot tub from a reputable Hot Spring dealer, your package includes access to a wealth of expert knowledge and certified technicians who can ensure the best possible outcome when your spa experiences problems. So, plan a visit to your showroom today. You can also refer to our frequently asked questions, request a personalized price quote, or download a brochure for more details about Hot Spring spas.
