Full Answer
Why is my butane lighter hissing?
Your lighter may have a leaky gasket around the fuel tank if you hear a continual hissing noise from the fuel valve or from the jets. A temporary hissing sound is common when you refill a butane lighter as fuel and air escapes in the process. But, if the noise persists, butane is leaking out, which is dangerous because it can ignite.
What should I do if my butane torch or lighter stops working?
If your butane torch or lighter stops working, you should also make sure you are using the correct grade and brand of butane.
Can a butane torch get clogged with soot?
Under normal circumstances, the nozzle shouldn’t become clogged because butane is a ‘clean’ fuel and does not produce soot to clog the nozzle. What can occasionally happen though is if you are using the torch for soldering, a tiny piece of solder may become lodged and stuck in the nozzle.
How to tell if a torch is leaking propane?
They turn your nail white eventually DO NOT get a propane torch. Just get a Blazer Big Shot. If your torch is spraying "out of the side" that sounds like there is butane coming out where it shouldn't be and that means a leak somewhere in your torch.
Why is my butane torch sputtering?
The most frequent reason a butane lighter will sputter or stop lighting is because it's out of gas. It's time to inject another dose of butane into the tank.
How do you fix a leaking butane torch?
2:054:11Repairing The Valve On A Hand Held Butane Jewelry Torch - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto those grooves or grab yourself a pair of very. Fine pointed needle pointed pliers. And just popMoreInto those grooves or grab yourself a pair of very. Fine pointed needle pointed pliers. And just pop those tweezers. Or your pliers into the groove here and turn clockwise.
Why is my butane torch hissing?
Usually, the problem with a lighter emitting a hissing sound, but not lighting, is a problem of flame adjustment. If the adjustment is set too high, then the force of the fuel escaping can be too great for the striker to ignite it. Essentially, the speeding fuel actually “blows out” the flame.
Should I shake my butane before filling?
While this is fine practice with a deodorant spray or air freshener it is NOT OK to shake your can of butane right before you refill your butane lighter! Shaking the can increases the amount of propellant in the mixture that goes into the lighter tank.
Can a butane torch explode?
As a highly flammable and pressurized gas, it's possible that butane may explode if exposed to heat or used improperly. This volatile substance has been known to injure or even kill people when used incorrectly, damaging property and causing fires.
How do I know if my butane torch is leaking?
A temporary hissing sound is common when you refill a butane lighter as fuel and air escapes in the process. But, if the noise persists, butane is leaking out, which is dangerous because it can ignite. Send your lighter out for repair, or toss it away, if won't stop hissing when you refill it.
How do you burp a butane torch?
1:123:02KMS 25 ~ How To Burp Your Torch! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little nozzle underneath and it's right where the filling is is down in there what youMoreThere's a little nozzle underneath and it's right where the filling is is down in there what you want to do is press on the little nozzle in there until you hear at sea.
How do you bleed air from a butane lighter?
0:492:55How to Bleed and Fill a Tech Lighter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's always some air in the can of butane. So don't shake the can of butane just turn it upsideMoreThere's always some air in the can of butane. So don't shake the can of butane just turn it upside down seat that fill valve right on the butane can nozzle. And depress and you can see it filling.
Can you overfill a torch lighter?
Some lighters have a gauge that shows the fuel level. Check the gauge to make sure it's full. Don't overfill the lighter. As soon as it feels full, stop adding butane.
How do you make a torch lighter flame bigger?
0:102:07How to Make a Lighter Have a REALLY BIG Flame - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe gas valve. Just like so and you need to get to this little mechanism here. So as you can seeMoreThe gas valve. Just like so and you need to get to this little mechanism here. So as you can see this is just a little gear system. This thing goes down on the white gear which increases or decreases.
Why do lighters not work in the cold?
4:2511:56"Bic lighters don't work in cold weather" - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy like fractions of a degree and when you're going into hyper thermia it means you're likeMoreBy like fractions of a degree and when you're going into hyper thermia it means you're like heatstroke so like that it means your body body core temperature is getting a little too.
How do you adjust the flame on a butane lighter?
0:392:45How to Adjust the Butane Valve on your Lighter - Buylighters.comYouTubeStart of suggested clipEnd of suggested clipThe adjustment valve is on the bottom right near the refill valve and to adjust it you can use anMoreThe adjustment valve is on the bottom right near the refill valve and to adjust it you can use an adjustment tool or a small screwdriver.
How do you fix a butane lighter?
12:1214:03How To Fix Butane Lighters (Common Problems Have Simple ...YouTubeStart of suggested clipEnd of suggested clipBefore you refill it so let's say it's really low it's you need some gas just take a screwdriver orMoreBefore you refill it so let's say it's really low it's you need some gas just take a screwdriver or something that's pointy and you push down on the tip where you fill it.
How do I dispose of a leaky lighter?
Wait 2-3 minutes before handling the lighter after it burns out. Put your lighter in your garbage can and wait for it to be collected. Once your lighter is empty, simply toss it in the trash. Wait for your trash to be collected by your local waste management service to dispose of your lighter.
How do you fix a propane torch head?
0:311:18Propane Torch-Weak Flame Issue - YouTubeYouTubeStart of suggested clipEnd of suggested clipSuper easy fix grab compressed. Air stick it right in the hole. And give it a good pull boom clearedMoreSuper easy fix grab compressed. Air stick it right in the hole. And give it a good pull boom cleared it right up see right through. It screw that back onto my torch propane torch.
How do you fix a click lighter?
3:114:13How to Fix a Lighter - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside drop the new flint in replace the spring tighten the screw. And replace the box back in theMoreInside drop the new flint in replace the spring tighten the screw. And replace the box back in the lighter. Casing. You should be good to go 4.
Why is my butane torch not working?
If your butane torch or lighter stops working, you should also make sure you are using the correct grade and brand of butane. Using the incorrect type, or low quality can often be the reason for your torch not operating correctly, so it’s always a good idea to check for any recommendations from the manufacturer with regard to the specific type of butane they recommend for your particular torch or lighter. One of the symptoms of lower grade fuel is flickering or sputtering of the flame, this symptom can also be caused by air in the fuel cell which can be resolved by removing the air.
What to do if your torch won't ignite?
The first is to try and regulate the flow of gas because it may be too low for optimal ignition. You can turn the gas output all the way up then turn it back after the gas is ignited.
Why is my solder nozzle not clogged?
Under normal circumstances, the nozzle shouldn’t become clogged because butane is a ‘clean’ fuel and does not produce soot to clog the nozzle. What can occasionally happen though is if you are using the torch for soldering, a tiny piece of solder may become lodged and stuck in the nozzle.
How to fix a solder torch?
To fix your torch, you will need to turn the torch off and remove the offending particle (s) of solder. One way to clean out the nozzle is to shoot compressed air into the nozzle area where the gas exits the torch. This may dislodge any foreign matter that is causing the suboptimal performance.
Can you fill a butane torch with butane?
Anyone who uses a butane torch regularly will probably realize that short of a total malfunction with any of its working parts, a butane torch generally only requires filling with a new butane to ensure its ongoing operation.
Is a butane torch indestructible?
That’s the good news. The bad news is that, while the humble butane torch has various and sundry uses and is prized for its dependability, it’s not indestructible and there are likely to be times when it’s just not behaving the way you want or expect it to. This is especially true if you use your butane torch on a regular basis.
Can you put gas in a butane torch?
Just as you wouldn’t put regular gas in a Lambo, so too you shouldn’t put cheap gas in your butane torch. Instead, always opt for high-quality refined butane from dependable producers like Puretane, Ignitus, Whip-It! and Newport Butane. That will help ensure that your torch always performs up to its potential, and that it lives out its intended useful lifespan.
Is a butane torch reliable?
The butane torch is, in many respects, a blissfully simple tool that is as reliable as it is versatile and effective. It has proven itself time and again in kitchens, laboratories, jewelry shops, artist studios and even automotive garages and home workshops for years.
Can you go wrong with a butane torch?
There aren’t a lot of things that can go wrong with a butane torch and if you use the right type of high quality, refined butane you may never experience any problems. That said, problems with the ignition system and/or the nozzle where the gas exits the torch and ignites into flame may still arise from time to time and will have to be dealt with.
Why is my butane torch hissing
The butane lighter needs a refill because it's low on fluid. If the lighter makes a hissing sound, turn the flame adjustment down. The setting on the flame may be too high. The hissing noise shows that the lighter is leaking.
Can you overfill lighters
Tip: Do not overfill. If overfilled, the lighter will leak fuel. Avoid getting the fluid on your skin, as it is a skin irritant.
Do butane cans explode
Portable butane gas stoves with integrated gas canisters (also known as lunchbox cookers) can pose significant safety risks. These stoves are commonly used for camping and outdoor activities. If the butane gas canister overheats and the shut-off valve fails, the stove is likely to explode and cause injuries.
Why do torch lighters always stop working
Make sure that there is no debris, dirt or lint clogging or blocking the lighter's operation. Even a small amount of debris can stop a lighter from functioning correctly. Exercise care when checking for blockages and keep your fingers well away from the igniter.
How do I know my butane lighter is full
Use 3-second bursts to refill the lighter. You can tell that the lighter is full because the butane will start to leak from the stem and won't go into the lighter. Depending on how empty the lighter is, it may take 2-3 bursts to fill it. Some lighters have a gauge that shows the fuel level.
Can a butane lighter be overfilled
Some lighters have a gauge that shows the fuel level. Check the gauge to make sure it's full. Don't overfill the lighter. As soon as it feels full, stop adding butane.
How long does it take to fill up a lighter with butane
Shake the butane gas refill can, press the stem of the refill can directly onto the refill valve on the bottom of the lighter. Keep them in a straight position and let the gas go into the lighter for about 5 seconds.
Check the Flame
Check the flame to diagnose any problems with your lighter first. Is the flame turned up too high or too low? When you ignite the lighter, a consistent flame should emerge. If the flame shoots out in on-and-off spurts, the fuel tank could be empty or full of air, which you have to bleed from the tank before you can refill your lighter.
Check the Flint
There are a handful of soft-flame butane lighters, and some of these ignite with a traditional flint and spark wheel. Models like the Colibri Julius, Xikar Meridian, and high-end ST Dupont Ligne 2 lighters are butane lighters that take a flint.
Check for a Hissing Sound
Your lighter may have a leaky gasket around the fuel tank if you hear a continual hissing noise from the fuel valve or from the jets. A temporary hissing sound is common when you refill a butane lighter as fuel and air escapes in the process. But, if the noise persists, butane is leaking out, which is dangerous because it can ignite.
Bleed the Tank Before Refilling
Every time you refill a butane lighter, a tiny bit of air sneaks into the tank. After 3 or 4 refills, the tank is overwhelmed with an air pocket, or bubble. This air prevents fuel from occupying the tank. Flip the lighter upside down and use a small screwdriver or a thin and narrow tool to compress the fuel valve and release the air.
Clean the Jets
If you’ve used lower quality fuel in the past, your jets may need to be unclogged. Or, if your lighter lacks a protective closing over the jets, lint and debris from your pocket can get into the jets. To clean the jets, simply bleed the lighter as described above.
Why is my butane torch not working?from butanetorchshop.com
If your butane torch or lighter stops working, you should also make sure you are using the correct grade and brand of butane. Using the incorrect type, or low quality can often be the reason for your torch not operating correctly, so it’s always a good idea to check for any recommendations from the manufacturer with regard to the specific type of butane they recommend for your particular torch or lighter. One of the symptoms of lower grade fuel is flickering or sputtering of the flame, this symptom can also be caused by air in the fuel cell which can be resolved by removing the air.
How to adjust butane gas in a lighter?from jobonlighter.com
Step 1. Press the ignition button or slide the cover, as required, to release butane gas into the burner chamber. Listen for the hiss of the gas as it leaves the lighter. Step 2. Adjust the flame height control — commonly located on the bottom of the lighter — with a blade screwdriver. Turn the flame adjustment toward plus or “+.”.
Why do you need to clean butane lighters?from butanesource.com
There, you’re all done! A butane lighter is the preferred method for lighting high quality cigars as they don’t contaminate the cigar with impurities that could change the flavor of the cigar itself. Cleaning your lighter regularly is a great way to ensure that there won’t be any off flavor or impurities imparted to the cigar during the process ...
How long does it take to refill a butane lighter?from ehow.com
Both the can of butane and the lighter should be upside down. When the lighter is full, the butane will overflow. This is normal. It takes approximately ten seconds to refill the average butane lighter. Advertisement.
What does the butane valve on a lighter do?from ehow.com
The butane valve is the area on top of the lighter that releases the flame. You should hear a hissing sound indicating that any residual air and butane within the lighter is being released. Repeat the process until the lighter is completely empty. Advertisement.
What does it mean when a lighter is bleeding?from butanesource.com
Bleeding: What is bleeding? The process of bleeding your lighter should result in getting rid of old fuel and air that may have built up over time. Old fuel and air in the system will cause the flame from your lighter to flicker and sputter, making it difficult to get a nice clean light of your cigar. Tools required.
How to clean a combustion chamber?from butanesource.com
To clean the combustion chamber, you will need to use the compressed air to blow out all of the dirt, soot, and other contaminants that have likely built up over time. Once this is done it is a good idea to inspect all the surfaces to make sure that they are clean.
