A Whirlpool side by side refrigerator not making ice after a power outage requires a little detective work. Check these items to find the cause for the ice maker not working after power outage is over. Is the circuit breaker tripped?
Why won’t my Whirlpool refrigerator make ice?
It’s normal for a Whirlpool refrigerator to have an ice maker with a switch. The switch is used to stop the ice maker from making ice once the bin is full. When the arm is in the down position, the ice maker will continue to work as normal. But if the ice in the bin has stopped the arm from going down, the ice maker will not continue to make ice.
What is wrong with my Whirlpool side by side refrigerator?
Hi, the only experience I had with a Whirlpool side by side (we had the Gold model), was with the inlet switch valve failing at the point where the waterline enters the refrigerator. It's an electronic valve that the ice maker signals to let in the water. It happened 2 times over about 10 years.
Why won't my ice maker make ice?
Ice makers require sufficient water pressure to work properly. If you have a clogged water filter, the water pressure might be insufficient for the ice maker to make ice. If the filter hasn’t been changed in 5-6 months, replace it.
Why is my Whirlpool ice maker overfilling?
Overfilling is an indication of other problems with the control unit or the inlet valve. The freezer temperature should be at least 10 degrees Fahrenheit to operate effectively. If the freezer is warmer than 10 degrees Fahrenheit, the Whirlpool ice maker may not operate correctly.
Why is my Whirlpool refrigerator not making ice?
What does it mean when an ice maker is turned off?
Why are ice cubes frozen in the tray mold?
How to tell if a refrigerator has electrical damage?
Why is my Whirlpool side by side fridge not making ice?
Make sure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened. Check to make sure there are no kinks in the water supply line. A kink in the line can reduce water flow. Straighten the water source line to restore adequate water flow and pressure.
How do you reset a Whirlpool ice maker?
The reset button is usually located at the bottom of the ice maker unit or in some cases at the top or on the bottom of the ice tray. Once located, press the button down for a few seconds until you hear a beep sound. Once you hear the beep sound, let go of the button. Once reset, check if the problem has been solved.
Why is my ice maker not making ice but water works?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
How do you reset a Whirlpool side by side refrigerator?
Reset the refrigeratorPower unit down by turning off the circuit breaker(s) or unpluging the product for 5 - 10 minutes.Power unit up by turning on the circuit breaker(s) or plugging the product back in.Ensure the cooling function is turned on.Test the control panel functionality.
Why would an ice maker suddenly stop working?
What causes an ice maker to stop working? There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supply line, or a clogged water filter.
Will unplugging my fridge reset the ice maker?
Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.
How do I get my ice maker to work again?
Turn The Ice Maker Off and On Again If your ice maker has a switch other than the control arm, find it and toggle it. This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.
What tells the icemaker to fill with water?
Once the ice maker has been connected to a power and water source (aka the plumbing line connected to the back of your refrigerator), the ice maker cycle should begin automatically. At the beginning of the cycle, an electrical signal is sent to a water valve to fill the ice mold with water.
How do you fix an ice maker that is not making ice?
Ice Maker Not Making Enough IceCheck your refrigerator and make sure it's perfectly level.Check your ice maker unit and make sure it's level.Check the water supply line for damage, pinching, or kinks.Check the fill cup; make sure it's aligned correctly with the water funnel.
Why my refrigerator is not making ice?
There are a number of potential reasons your refrigerator is not making ice—but most have simple solutions. The most common causes are: The water fill tubes are blocked. The water inlet valve is blocked or frozen.
Where is the reset button on a Whirlpool fridge?
There's a reset button on some Whirlpool refrigerators, but it's exclusively for the ice maker. You have to unplug your appliance for 5 to 10 minutes to reset the fridge. You can also reset it by pressing the door switch and temperature plus (+) button 3 times in 10 seconds.
How do I test my Whirlpool ice maker?
2:2120:28How to Test and Replace Maytag/Whirlpool Gold Ice Maker ...YouTubeStart of suggested clipEnd of suggested clipThe left door holding the two leftmost buttons on the display hold it for three seconds.MoreThe left door holding the two leftmost buttons on the display hold it for three seconds.
How do I force my ice maker to cycle?
Turn The Ice Maker Off and On Again If your ice maker has a switch other than the control arm, find it and toggle it. This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.
How do I reset the feeler arm on my Whirlpool ice maker?
Press the reset button – usually located near the ice maker. If that doesn't work, adjust the feeler arm, turn it off and on again, or unplug it for five minutes.
Is there a reset button on Whirlpool refrigerator?
There's a reset button on some Whirlpool refrigerators, but it's exclusively for the ice maker. You have to unplug your appliance for 5 to 10 minutes to reset the fridge. You can also reset it by pressing the door switch and temperature plus (+) button 3 times in 10 seconds.
Why is my Whirlpool ice maker not dumping ice?
One of the most common – and innocent – causes of an ice maker that won't dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them.
What are some common ice maker problems and solutions?
Refrigerator ice maker problems can often be tied back to a handful of main components, including water valves and lines, the water filter, the ice...
Ice maker is not working or not making enough ice
An ice maker that doesn’t produce can feel like nothing more than a waste of precious refrigerator or freezer space. Browse some of the common caus...
Ice maker is making ice, but is not dispensing
A dispenser refusing to release cubes into your cup can be frustrating, especially when the ice bin is visibly full. Some of the most common causes...
The ice maker is making too much ice
Ice makers control ams are designed to sense a full ice bin and pause ice production at the right times, so an overflowing ice bin can be a sign th...
The ice has an odd taste
Strange-tasting ice in your favorite drink can be an unpleasant surprise, and may leave you wondering what’s wrong with your ice maker. Some common...
The ice maker is leaking
A leaky ice maker might drip into the ice bin and may cause ice clumps to form, or leak outside of the refrigerator or freezer and create a puddled...
The ice maker is making ice cubes that are too small
Ice cubes that are hollow or too small can usually be traced back to two main factors: water flow and temperature settings in the refrigerator or f...
The ice maker itself is frozen
Determining the cause of a frozen ice maker can seem complicated when you have large chunks of ice blocking your line of sight. Luckily, the common...
Not Making Ice - Side by Side Refrigerator - Product Help - Whirlpool
Style 1 Style 2 Style 3 Style 4; The On/Off switch is located on the bottom of the ice maker, which can be accessed by lifting and opening the ice maker door.
How to Reset Your Whirlpool Ice Maker | Better Home + Living
I’m glad that you checked out Better Home + Living today! We are a lifestyle blog that helps our readers find value in their home and life. We've been writing informational, reviews and helpful articles for a very long time, and have grown into a trusted source for home + living.
Why isn't my Whirlpool ice maker making ice?
So if you find your Whirlpool Ice maker not making ice, it’s time for some quick troubleshooting before it gets too hot. Make sure the ice maker is turned on and then check the water supply. Check the filters, hoses, and even the door switch. And remember to adjust your settings.
Why won't my ice maker work?
The water inlet valve is a key part of your ice maker. If this valve doesn’t work, the dispenser and ice maker won’t function. The water inlet valve requires at least 20 psi to function. If it’s defective, or if the pressure isn’t enough, the water won’t be able to flow through. As a result, the ice maker won’t function properly.
Why won't my ice maker work in my refrigerator?
This can happen when the metal fingers of the ejector’s arm try to grab new ice that is not yet fully frozen. The frozen water then forms an ice bridge that blocks new cubes from falling into the Whirlpool ice bin.
What temperature does an icemaker need to be to release ice?
The icemaker module is equipped with an ice ejector which turns the drum to release ice when the temperature in the icemaker tray reaches about 15 degrees Fahrenheit. The module sends power to the water inlet valve when it’s time to fill the drum again.
What happens if your refrigerator filter is not working?
When there is a problem with the fridge filter, without enough water flowing to the ice maker, the production of ice will be halted or severely diminished. Make sure that water filter is not clogged and is currently installed as per manufacturer insutructions.
Why won't my freezer freeze?
If your freezer is too warm, the ice won’t freeze as well. Refrigerators need to stay cool to stay working. By cleaning the coils – the metal allergens that often accumulate and restrict air flow – you can help your refrigerator maintain its temperature and ensure that your freezer and refrigerator work well.
Why does my refrigerator turn off when the door is open?
The ice and water dispenser in your fridge will turn off automatically when the door is open. When the door switch is broken, it doesn’t have continuity and there’s no way to tell until you do a test with a multimeter. If the door switch tests negative for continuity, you’ll need to replace it.
Why won't my Whirlpool refrigerator dispense ice?
Ice can sometimes jam the ice maker mechanism causing your Whirlpool refrigerator not to dispense ice. Look for ice cubes obstructing the movement of the cube ejectors or the automatic shut-off arm.
Why is my Whirlpool ice maker not dispensed?
If the ice maker does not dispense ice, the door safety switch is probably faulty. A trained Whirlpool service technician is the best person to make this repair.
Why is my freezer not getting cold?
If your freezer doesn’t get any colder, you may have a problem with the thermostat or the condenser. In either case, your best solution is to have a trained Whirlpool service technician check out your refrigerator.
How to test Whirlpool ice maker?
You can test this switch with a little help. Open the door and locate the switch. While you hold a dish or pan under the dispensing chute, press the door safety switch. Have a friend then push the ice dispensing switch. You should hear the ice maker start to dispense ice.
How hot should a Whirlpool freezer be?
The freezer temperature should be at least 10 degrees Fahrenheit to operate effectively. If the freezer is warmer than 10 degrees Fahrenheit, the Whirlpool ice maker may not operate correctly. Turn the freezer thermostat down and wait 24 hours to give the system time to get to the new temperature.
How much water pressure does a Whirlpool ice maker need?
Most Whirlpool refrigerator ice makers need at least 20PSI of water pressure to work properly. Low water pressure can affect your ice maker in several ways. The automatic inlet valve may not open. You may notice the ice molds not filling properly, resulting in small, misshapen ice cubes.
Why does my ice maker freeze?
If the temperature in the freezer compartment falls too low, the water line that feeds your ice maker may freeze. A frozen water line may be remedied by simply turning down the thermostat on the freezer to a slightly warmer temperature. In some extreme cases, the entire ice maker must be removed from the freezer and allowed to thaw.
Why do my ejector blades blink?
Yes, because the ejector blades are not in there normal resting position, thats why your getting the two blinks and then a pause and then repeat.
How long does it take for an ice maker to dump cubes?
Ok, you can manually fill the ice maker tray with a cup of water, and wait about 2 hours to see if it dumps the cubes, if so, then your ice maker is fine and that just leaves the water inlet valve as the culprit or the black rubber fill tube may be clogged with ice.
How do I remove the motor from a freezer?
That allowed the front panel to slide off. Then I just removed the four screws holding the motor in place. Before you can remove the motor, you have to open the freezer, take the ice holder out and remove the 2 screws holding the turning mechanism in place. One you do that, you have to remove all of those parts including the long metal pole which is inserted into the motor.
Why is my Whirlpool refrigerator not making ice?
The best thing to do is troubleshoot a few items to determine the cause of the ice maker failure.
What does it mean when an ice maker is turned off?
Is the ice maker turned off? Ice makers are equipped with a shutoff mechanism to keep the ice bin from overfilling. It could be a switch or paddle, but usually a metal arm. Check to see if the ice maker shutoff lever is tripped or stuck, and release it to trigger the ice maker to turn back on.
Why are ice cubes frozen in the tray mold?
Are ice cubes frozen in the tray mold? Sometimes water overfills the tray and water freezes around where the ice cubes are molded before they drop into the bin. If you see ice cubes and they cannot release, carefully remove the excess ice to allow movement of the dispenser.
How to tell if a refrigerator has electrical damage?
Is there electrical damage? Although this is less likely, it can happen. Inspect the inside of the refrigerator and around the cord and outlet for burn marks or other signs of electrical damage. If there are any indicators of electrical damage, call an electrician.
