Bosch Washing Machine Drain Not Working — Solved
- 1. Pump Filter Is Blocked Over time, debris and lint accumulate in the pump filter at the lower front section of the machine. It is advised that you clean the filter every month in order to prevent blockage. To learn how to clean the pump filter in your Bosch washing machine, read this article.
- 2. Failed Pump Assembly
Full Answer
Why will my Bosch washing machine not drain?
Why is a Bosch washer not draining water as usual? The drain pump may be obstructed by lint, dirt, or debris. Cleaning the pump and removing any obstructions should solve the problem.
How do I force my Bosch washing machine to drain?
Here's how to drain water from a Bosch washing machine: Open and remove the service flap on the washer's bottom right corner. Place a shallow container under the opening to contain draining water. Unfasten the drain hose and remove the plug. Allow water to drain into the container.
How do I clear a Bosch washing machine blockage?
8:3111:52How to Diagnose & Fix Blockage Issues on a Bosch Washing MachineYouTubeStart of suggested clipEnd of suggested clipOnce you're happy that the hose is cleared of any blockages you can then refit it to the machine. ToMoreOnce you're happy that the hose is cleared of any blockages you can then refit it to the machine. To fit the clip. Make sure that this little lip. Goes inside the machine at the bottom.
What causes washing machine not to drain out the water?
A washing machine not draining can have multiple causes, including a clogged or jammed drain hose or a broken pump, lid switch, or belt. No matter the culprit, you need to drain the water from the washing machine before diagnosing the issue or doing any work to remedy the situation.
What causes a washing machine not to drain and spin?
0:2215:01Washer Won't Spin or drain -- DIY -- Easy Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut this machine it could be due to three possible causes one is that the drain pump is clogged theMoreBut this machine it could be due to three possible causes one is that the drain pump is clogged the machine's clogged it's not able to get all the water out of the spin. Basket.
How do you reset a Bosch washing machine?
0:000:30Bosch Maxx Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipMachine okay turn your dial to off. Okay keep the start reload button pressed in all the time.MoreMachine okay turn your dial to off. Okay keep the start reload button pressed in all the time.
How do I know if my drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don't see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do I know if my washing machine drain hose is clogged?
The number one sign of a clogged drain affecting your washing machine is finding water inside the unit after the washing cycle is complete. During the cycle, water is flooded into the chamber of the machine, mixing in with the detergent to clean your clothing.
How do you manually drain a washing machine?
0:162:14How to Drain the Water Out of Your Washing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then what i do is i'll unscrew. This. And pull it out this is a coin trap the water comes inMoreAnd then what i do is i'll unscrew. This. And pull it out this is a coin trap the water comes in this way. And goes out this way so it'll trap anything in there that could possibly damage the pump.
How do I get my washing machine to drain?
How to drain a washer filled with waterTry the spin cycle. ... Turn off the power and water supply. ... Remove and check the drain hose. ... Check to see if it will drain with the help of gravity. ... Check your machine's inner workings. ... Check the drain pipe. ... Drain manually if needed. ... Call a service professional.
Why are my clothes soaking wet out of the washer?
Drainage Hose May be Blocked or Kinked The most likely cause for a washer to return soaking wet clothes is a drain hose problem. Here is how you should resolve and clean: Clean the filters in the water supply hose. Attention: The leaking water may be very hot with a risk of scalding.
How do you test a washing machine drain pump?
0:201:37How to test a washing machine pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipSee the green blades. Place stop it you should be able to see them come to rest. That's one of theMoreSee the green blades. Place stop it you should be able to see them come to rest. That's one of the blades of the impeller. That's it just how you test.
How do I drain the water from my washing machine?
How to drain a washer filled with waterTry the spin cycle. ... Turn off the power and water supply. ... Remove and check the drain hose. ... Check to see if it will drain with the help of gravity. ... Check your machine's inner workings. ... Check the drain pipe. ... Drain manually if needed. ... Call a service professional.
How do you drain a washing machine without flooding?
If you have a drain pump filter only, place the shallow container up against the machine, directly under the filter, to catch the water. Turn the knob slowly until water starts coming out. Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely.
How do I get my Bosch washing machine to spin only?
0:090:46How to select Spin/Drain cycle without Rinse? | Forbes Rentals - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor example you've done a towels wash the cycle is finished and you want to get as much water out ofMoreFor example you've done a towels wash the cycle is finished and you want to get as much water out of the load as possible. I will now show you how to do this select the rinse spin drain cycle at the
How do you fix a Bosch washing machine that won't spin?
Step-by-stepTurn the appliance off.Pull out the mains plug.Open and remove the service flap.Drain off all water using a drainage hose or by removing the pump cover slowly.Clean the interior, the thread and the housing of the pump so that the impeller is able to rotate.Refit the pump cover and screw back firmly.More items...
Why is my Bosch washing machine not draining water?
Why is a Bosch washer not draining water as usual? The drain pump may be obstructed by lint, dirt, or debris. Cleaning the pump and removing any obstructions should solve the problem. Learn more Bosch washing machine troubleshooting tips to resolve drainage issues.
Why is my Bosch washer drain pump not working?
Many Bosch washer drain pump problems are caused by obstructions like dirt and lint or small foreign objects. Cleaning the pump and removing any visible blockages can resolve drainage problems, while regular cleanings can prevent them from recurring. Turn off the washer’s water tap or valve.
What to do if Bosch washer does not drain?
If your Bosch washer does not drain the first step may be to remove any remaining water in the washer tub. Is there a way to drain lingering water without making a mess? Draining the water directly from the drain hose can remove it quickly and neatly.
What to check for in a hose?
Check the hose for obstructions such as lint or coins, carefully removing any blockages.
Why is my Bosch washer not draining?
A Bosch washer not draining properly is often due to a drain hose obstruction. The drain hose transports water as it flows through the drain pump to the sink or standpipe. Blockages are often due to kinks in the hose or clogs formed by lint, debris or foreign objects that restrict water flow.
How to drain water from Bosch washer?
Place a shallow container under the opening to contain draining water. Unfasten the drain hose and remove the plug. Allow water to drain into the container. Plug the drain hose and refasten it before replacing the service flap. Restore the washer’s power and water supply. Image from Bosch Canada. 2.
What to do if there are no obstructions in a hose?
If there are no visible obstructions, remove the hose connector to check for blockages.
Can a Bosch washer drain pump be clogged?
Bosch washer drain pump problems can also cause draining issues, specifically if the pump is clogged with debris. Fortunately, the pump can be easily accessed to clean and remove blockages. Making pump cleanings part of regular washing machine maintenance can help prevent future obstructions.
Where is the service flap on a washer?
Open and remove the service flap on the washer’s bottom right corner.
Can a door lock cause a washer to drain?
A faulty door lock can also affect draining, as the washer won’t receive the signal to begin spinning and draining if the lock doesn’t engage. If the lock appears damaged or fails multimeter testing with a lack of continuity, it must be replaced.
Why won't my washing machine drain?
Some older washing machines are equipped with a water pump belt. If the water pump belt is broken or worn out, the washer will not drain. Check the belt and replace it if it shows signs of excessive wear.
What happens if the washer door is not latched shut?
If the washer door is not latched shut, the door switch will prevent the washer from operating. If the door lock is defective, the washer will not spin or start. The door lock can fail either mechanically or electrically. Inspect the door lock for damage.
Why does my washer have a coin trap?
Some washers are equipped with a coin trap to trap any foreign objects that enter the drain. The coin trap should be checked and cleaned periodically. If debris continues to accumulate in the coin trap, the coin trap will become clogged, and the washer will not drain properly. If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly.
What does a lid switch do?
The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not drain. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it.
What to do if drain pump is blocked?
To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the drain pump is clear of obstructions, but is still noisy during the drain cycle, replace the drain pump. Required Part.
What happens if the water pump belt is worn out?
Some older washing machines are equipped with a water pump belt. If the water pump belt is broken or worn out, the washer will not drain. Check the belt and replace it if it shows signs of excessive wear. Required Part. Washing Machine Water Pump Belt.
Can socks clog a pump?
Sometimes, socks and other small articles of clothing can get into the drain system and clog the pump hose or the pump itself. Remove the hoses from the pump and check for any obstructions.
Why does my washing machine not leave water?
If you hear the washing machine's pump operating but no water is leaving the machine, it is likely that the rubber drain hose running from the back of the machine to the drain standpipe or washtub is clogged with cloth fibers. This can sometimes happen after you wash items like rugs, which may shed a lot of fabric fibers, or if the drain hose is pinched. If the hose is clogged, it can prevent the water from being pumped out of the machine.
Why does my washing machine pump sound like it is working?
If you can hear the pump operating but it sounds like it is laboring, there may be a piece of fabric or another item obstructing the pump mechanism. To remedy this, you'll need to shut off and drain the machine, then remove the washing machine panel to examine the water pump. The pump itself may be clogged, or the clog might be in the corrugated tube that leads to the pump.
How to find a clogged washer?
To determine where the clog is located, first, fill the washing machine with water. Turn the dial to the spin/drain setting and get ready to drain it. Position yourself where you can see the drain standpipe while still having access to the washer dial.
How does a clogged drain work?
A clogged drain causes water to back up into the standpipe and spill on the floor. Clearing the clogged drain will usually resolve the problem. The washing machine drain hose goes down about two feet into the plumbing drain standpipe.
How does a washing machine pump work?
The pump is operated by a drive belt that fits around pulleys on the bottom of the washing machine motor. If this belt is broken or isn't tight on the pulleys, the washing machine will have difficulty draining or may not drain at all. Fixing this will require you to turn machine over on its side to examine the belt.
What is the problem with a washing machine pump?
If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.
How to tell if a washing machine is leaking?
With the door open and the machine running, press the switch by hand and listen for a clicking sound. If you don't hear it, the switch may need replacing.
Why won't my washer drain?
If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Why does my washer spin when it's top loading?
Top-loading washers will only drain and spin if the lid is securely closed. Therefore, a defective lid switch assembly could be causing the problem.
What happens if you remove the hose from a washer?
Be aware that if you remove the hose to get an obstruction out of the pump, any water in the washer will come pouring out. To avoid a mess, scoop out as much water from the drum as possible before disconnecting the hose.
How to reset a washer that won't turn on?
Unplug your washer for about one minute. Then, plug the appliance back in. Open and close the door six times in 12 seconds to tell the computer to reset everything. This may not work on all machines, but it’s an easy fix if yours is compatible with this technique.
What to do if your washer hose is kinked?
Adjust the hose behind the washer to make sure water can easily flow through it. If the hose is kinked, that could stop an otherwise functional machine from draining.
What is a washing machine?
A functional washing machine is an effective tool for getting dirt, sweat, and stains out of clothing. The exact way the washer cleans your clothes depends on the precise settings you choose, but the basic premise is the same: first, the drum fills with water when you hit “Start.”.
Can a sock clog a washing machine?
Remove the front panel of the washer and check for any obstructions in these areas. If you find anything, remove it to see if you can get the washing machine to drain.
