Go to B&Q or a local timber yard and ask them to cut you a piece. Measure really well and they will do it to the millimetre normally. also if they can supply worktop they may well have offcuts they can sell you cheaply, cut to size, so you don't have to buy a giant 3 metre long piece. Likewise, do they cut wood at B&Q?
Full Answer
Will B&Q cut my kitchen worktop?
Jun 20, 2020 · In this regard, will B&Q cut worktops to size? Go to B&Q or a local timber yard and ask them to cut you a piece. Measure really well and they will do it to the millimetre normally. also if they can supply worktop they may well have offcuts they can sell you cheaply, cut to size, so you don't have to buy a giant 3 metre long piece.
Where can I get a worktop cut to size?
We can cut timber bought from B&Q to the size you need, any day of the week. No appointment needed. Do B&Q fit worktops? Made to measure worktops at B&Q What’s more, our professional fitters will install it for you. Choose from three materials – granite, quartz and solid surface (an acrylic material).
Does B&Q cut wood for free?
May 03, 2020 · For those that don't know: If your B&Q store has a timber cutting service, then they will cut it for you free of charge. It used to be just 4 cuts but now it is up to 15 cuts for free. This is a big help when buying the large 8'x4' sheets of wood which is often cheaper than the smaller sheets and fitting it in the car.
What is the best tool to cut a kitchen worktop?
Jun 21, 2020 · For those that don't know: If your B&Q store has a timber cutting service, then they will cut it for you free of charge. It used to be just 4 cuts but now it is up to 15 cuts for free. This is a big help when buying the large 8'x4' sheets of wood which is often cheaper than the smaller sheets and fitting it in the car. Click to see full answer.
Will B&Q cut a worktop to size?
Can worktops be cut to size?
Can a kitchen worktop be cut?
How do you cut a fitted worktop?
What is the best saw for cutting kitchen worktops?
A circular saw is the most efficient tool for cutting a worktop down to size.Feb 18, 2017
How do you cut a solid laminate worktop?
How do you cut a compact laminate worktop?
How can I cut my kitchen worktop without chipping it?
How can I cut my countertop without chipping?
Is it easy to cut laminate countertop?
How do you cut a kitchen worktop with a hand saw?
- Use a handsaw with 10 to 12 teeth per 25mm. ...
- Have the good side facing up.
- Use masking tape to cover the area you saw.
- Mark your measurements on the masking tape.
- Start cutting on the front profiled edge (the curved detail), not the back with the raw edge.
How do you cut a laminate worktop with a circular saw?
wiggy Screwfix Select
As you say move the small away from the wall giving 20mm and also move the large away from the wall giving 20mm.
WillyEckerslike Screwfix Select
You have another option but it is far more radical and quite possibly unacceptable on that basis however....#N#Swap one of the units for a slightly smaller one on the long run! Some kitchens have some door sizes in 50mm increments - you could even modify the unit and just swap the door.#N#There can't be many situations where 'the wife' would be thrilled at something being 2" shorter, but this might just be one of them....
Jitender Screwfix Select
The only thing I notice is there is an end panel to the left of the cooker and non to the right. So dosnt look symmetrical.
Muzungu Screwfix Select
The only thing I notice is there is an end panel to the left of the cooker and non to the right. So dosnt look symmetrical.
greenback78 Active Member
Well spotted; that does look, to my eyes anyway, a bit odd. It's the sort of thing that once you notice it draws the eye. Wondering what the rationale was for that. Obviously would mean shuffling everything along but would kill two birds with one stone, unless there is a good reason for the single side panel.
yetanothermike Member
Firstly many thanks for the replies - some good stuff and ideas to mull over. I'm sure there are other mistakes elsewhere and to respect those that have kindly given their time already I will answer them later but for now want to keep this just about the overhang issue.
Mr Rusty Screwfix Select
I guess you are going to cut a hob out, or perhaps you have a bit of spare WT. You could make a little wine rack to stand against the fridge. If you shortened the long WT by say 150mm you would have plenty to play with. This would leave just a little bit of front edge short, which with a bit of careful jointing could be patched in from offcuts.
