Can you add chain to a chandelier? Chain can be used to add or remove links of chain, and it can be used to change the hanging height of the chandelier. If you don’t know the ceiling measurement or how high you want the chandelier to be, this is helpful.
How do you attach a chain to a chandelier?
Test-hang your chandelier and measure how much chain you’ll need. Remove chain links with pliers to shorten to the right length. Thread the wire through the chain to the canopy. Allow for a foot or so of excess and use wire cutters to trim any un-needed length. To install, you’ll thread through the wire through the chain to the canopy.
Is it easy to install chandelier installation?
Chandelier installation is easier than you might think! Here are some basic tips on how to install and wire chain-hung chandeliers. Chain-hung designs come with chain and electrical wire, and they include a canopy that covers the electrical connections at the ceiling.
Can I make a chandelier longer?
So I decided I could make a chandelier longer and just rewire the top wire that connects from the chandelier, weaves through the chain and connects the chandelier to the power source in the ceiling.
How do you fix a chandelier that won't stay up?
You and the helper should lift the chandelier simultaneously to take the weight off the chain and wire. With one hand, adjust the chain by placing a higher chain link in the hook. Add length to a chandelier chain that has no extra links by installing a chain extension. Have a helper hold the chandelier.
Can you add chain length to chandelier?
Attach one end of the chandelier extension to the end of the chandelier chain, securing it with pliers. Lift the chandelier and connect the chain you added to the chain on the ceiling. Close the link with pliers. Carefully release the chandelier and allow it to hang.
How do you attach a chain to a chandelier?
0:451:54How to Install Chain Hung fixtures by Maxim Lighting - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow you can attach the top of the chain. Using the carabiner onto the collar loop. To the mountingMoreNow you can attach the top of the chain. Using the carabiner onto the collar loop. To the mounting bracket. And then wire it connect. The green striped wire to your ground wire.
Can I add chain to flush mount chandelier?
The flush mount should be attached to a fixture in the ceiling. Remove the flush mount, purchase a plate to cover the flush mount and a plate to cover the fixture in the ceiling. Extend wire, attach one end of chain to the ceiling plate, the other end to the flush mount.
Can you add wire to chandelier?
Adding Wires Isn't Difficult This isn't a hard task, I've done it before, but every light is a little different, and this light fixture is a vintage one at that. First thing I had to do was figure out where that top wire connected to the rest of the wires for each arm of the chandelier.
How do you swag a chandelier with a chain?
You can buy each item separately but I found it easier to buy the kit.Step 1 – Determine Where the Fixture Should Hang. ... Step 2 – Calculate the Amount of Cord/Chain You'll Need. ... Step 3 – Wire Your Chandelier to the Ceiling. ... Step 4 – Install Your Swag Hook to the Ceiling. ... Step 5 – Install Toggle Bolt in Drywall Ceiling.More items...•
How do you swag a chandelier without a chain?
- Swagging a Pendant Light Without a Chain -Mark on your line where you want the loop to go.Run the area where you want the loop over the thimble (the u-shaped device that makes the curve).Attach the clamp right below the thimble, and hand tighten it. ... Hang your light.Voila!
Can you add a pull chain to a light fixture?
Yes, that's right. Adding a pull chain to a light fixture could even save you money!
How do you put a chain on a light fixture?
0:272:37How to Install a Chain Link Chandelier | Canarm - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace canopy and nut onto the upper connector hang chandelier from the upper connector at theMorePlace canopy and nut onto the upper connector hang chandelier from the upper connector at the correct height remove any excess chain drop the nut and canopy down the chain.
How do you convert a chandelier to a flush mount?
0:266:20Converting a Chandelier to a Flushmount - YouTubeYouTubeStart of suggested clipEnd of suggested clipRoom i realized that they're basically made the same way it's just that the plate on this one isMoreRoom i realized that they're basically made the same way it's just that the plate on this one is turned downward and the plate on the other one is turned upward you know open.
Can you extend the length of a chandelier?
There is an extra length of chain in the chandelier. If you need to extend the length of the chandelier, it comes with an extra length of chain and wire. Stand on a piece of furniture. The chandelier should be supported by an assistant while you extend it.
How do you lengthen a light fixture?
Cut the chain or downrod to the length that you want. You can buy chains and downrods at most hardware stores. Purchase the same type of hanging material that you are currently using. If your fixture hangs by a chain, it’s a good idea to buy a chain of the same thickness.
Can you add chain length to chandelier?
Chain can be used to add or remove links of chain, and it can be used to change the hanging height of the chandelier. In order to get the desired chain length, chain links are removed and one end of the chain is attached to the top of the fixture.
Can you splice chandelier wire?
It’s not code compliant to make exposed splices in a junction box. Ed Beal suggests that you clip your current wire as close to the fixture as you can, and then make a hole in the body of the new fixture.
Is it OK to swag a chandelier?
If you pay attention to the details, you’ll get a quicker, less expensive solution for centering your fixture that also provides flexibility in case you decide to change the room again.
What is a wire extender?
An extension cord is a length of flexible electrical power cable that has a plug on one end and one or more sockets on the other end. The term “extension cord” has been used for a long time.
Can you hang a chandelier without a chain?
The chandelier cannot be hung from the chain because it won’t be flush. I don’t advise it unless you have the skills to attach the top of the chandelier to the ceiling in a way that is strong enough to support the fixture.
How many wires are needed for a chandelier?
There will be three wires: a white, black, and a copper ground wire. Test-hang your chandelier and measure how much chain you’ll need. Remove chain links with pliers to shorten to the right length. Thread the wire through the chain to the canopy.
What is chain hung?
Chain-hung designs come with chain and electrical wire, and they include a canopy that covers the electrical connections at the ceiling. Safety is of top importance when working with electrical connections. Make sure the wall power switch is in the off position and that the power is turned off at the breaker box.
How to add length to a chandelier chain?
Add length to a chandelier chain that has no extra links by installing a chain extension. Have a helper hold the chandelier. Use pliers to open one of the links on the chandelier. Lower the chandelier to a flat surface.
How far should a foyer chandelier hang?
Ideally, a foyer fixture hangs 7 feet from the floor, but dining and bedroom fixtures can hang lower. When extending the length, consider the flow of traffic in your home. Dropping the light too low in a high-traffic area can make the chandelier a dangerous obstacle for visitors.
Standard Chandelier Height Tip
Rule of thumb is that a chandelier should hang approximately 36″ from the table top. (that gives ample light, doesn’t block your view across the table when you’re seated, and still visually connects to the table)
Separating the Wires
The wire easily pulls apart into the two separate wires, each still coated with the protective covering.
Using a Wire Stripper
This little tool is so fun and easy to use. It’s a wire stripper. ( Here is a link for a wire stripper and cutter all in one tool !) affiliate
Connecting the Wires
Then it was just a matter of taking one of those new wires from the top and connecting it to the bunch of wires in the ‘nest’… and doing the same with the other wire from the top to the other bunch.
Adding More Chain to the Length
Now it was time to remove and replace the chain. That’s one part that was kinda sad. The old, vintage chain was thick and heavy… I couldn’t find a nice thick, heavy chain that matched it, so I had to opt for the standard lamp chain in the hardware store. (so I will probably be making a cord cover to hide it… stay tuned)
Weave Wire Through Chain
Once the chain was reattached to the light and ring on the end that connects to the ceiling, I fed the wire through the links of the chain and reattached it to the power source.
1. Splice in News Wire
If the chandelier is older and you don’t know how much wire there should be, splicing in the new wire will add capacity to your chandelier. At this point, you can add as much additional wiring as needed to reach your desired length.
2. Add New Wires
In instances where you know how much wire your chandelier should have been wired with originally, running a new wire will be much easier. At this point, you can add as much additional wiring as needed to reach your desired length without having to splice in a new section.
3. Add Wire Offset
If you want to add more wire to your chandelier, follow the steps to add new wires or splice in the additional wire. As you are feeding the new wiring section up into the ceiling cap below, move about 6 inches of old wiring off to one side so that it is not being used.
4. Use Wire Nuts
Wire nuts are great for holding together chandelier wires because they allow you to run additional wire sections without having to solder them together. They work well with both old and new chandeliers.
5. Twist Wire Together
If you only need to run a few inches of additional wiring, twist the ends of the wires together without using an insulator. This works especially well with stranded wire since it is already a bundle as you can separate a section to use.
6. Use Wire Clamps
Wire clamps are great for adding chandelier wire to existing wiring. They can be used on both old and new chandeliers, though they work best with modern chandeliers that have ‘s’ hooks or wire loops at the end of each strand.
7. Use a Ferrule
If you need to add chandelier wire to existing wiring that has been run through a pendant light canopy, you will have to reach into the ceiling cap. A ferrule is essentially a small metal tube that can be used as an extension for your hand so that it will hold onto the insulation of the new wiring you are feeding up through the ceiling cap.
