How to paint a brass ceiling fan. Take the metal arms. Paint the blades with sky blue acrylic paint. Or in the winter when smoke from some burned food wafts into the family room airspace. This is messy and my least favorite part of the project.
Do I need to sand brass before painting the fan?
Of course, now I recommend taking the fan down and outside to spray the parts and then reinstall. But, I did not sand the brass. The paint has primer in it , seems to stick well without sanding and I was afraid it would just make scratches that would show through the paint.
Can you spray paint a ceiling fan?
You can remove the fan from the ceiling and take it outside to spray paint or you can do what I did. I left the main part of the fan in place and just removed the blades. Doing it this way, I could paint the fan by myself. No electrical knowledge or re-wiring needed.
How do you paint a ceiling fan blade?
Painting Your Ceiling Fan Sand the blades with 120-grit sandpaper. Paint all parts with white-colored primer. After the white-colored primer is dry, paint all of the parts. After the first coat of paint is dry, apply a second coat of paint to all parts.
How do I clean the brass on my fan?
I cleaned the brass well, on both the fan and the vents. As you can see, I removed only the blades, and I covered the bulb sockets with tape. Of course, now I recommend taking the fan down and outside to spray the parts and then reinstall. But, I did not sand the brass.
Can you paint the metal on a ceiling fan?
Spray the primer using long, even strokes until each piece is fully painted. Follow the primer manufacturer's instructions for how far to hold the can away from the fan pieces and how long to let it dry. Once fully dry, turn the blades over and spray primer on the opposite side.
What kind of paint do you use on a ceiling fan?
enamel based spray paintFor this project, you are going to want to use a flat or enamel based spray paint. Preferably one with primer already in it. Especially, if you are going to go from a light color to a dark color. Try to avoid gloss paints because they will leave a glare on your ceiling fan.
How do you paint a brass ceiling fan without taking it down?
Painting a Ceiling Fan Without Taking It DownTurn Off the Circuit Breaker. Turn off the circuit breaker to the fan. ... Lay Out a Drop Cloth. ... Apply the Primer. ... Pour Paint in a Small Dish. ... Paint the Screws. ... Paint the Ceiling Fan Arms. ... Use Latex Paint on Vinyl Fan Blades. ... Use Oil-Based Paint on Wood Blades.More items...
Can you spray paint an old ceiling fan?
Rust-Oleum spray paint is the key to a beautiful finish when you update your ceiling fan to match your décor. Change the look of your fan in an instant with this easy DIY tutorial. Make sure your ceiling fan is removed and disconnected. Clean and dry it thoroughly before painting.
How can I make my old ceiling fan look better?
Give it a burst of color.Swap out the blades.Make your ceiling fan an accent piece.Switch up the light shades.Match the blades to your style.Use spray paint to luxe it up.Stain the wood or add faux paneling.Add your own light fixture.More items...•
What is the best paint for ceiling fan blades?
When it comes to painting ceiling fans as well as their blades, the best paint to use across the board is a high-quality enamel spray paint, such as Rustoleum Protective Enamel Spray Paint. Enamel paints dry hard, providing a durable, easy to clean, long-lasting finish.
What paint will stick to brass?
Any permanent paint can be used to paint Brass as long as the surface has been prepared properly with a primer beforehand. Acrylic paint, Enamel paint, latex-based paint, and similar can all be used to paint Brass once it has been primed properly.
Do you need to sand brass before painting?
How do you prepare brass for painting? Support wikiHow by unlocking this expert answer. You'll need to sand the surface well. Then, you should apply a shellac primer to smooth out the surface and help the paint stick.
Can you paint brass without sanding it?
Generally speaking, you don't have to sand before painting brass, depending on how you cleaned the piece. If you had to use a tarnish remover and some steel wool to remove corrosion, then sanding isn't usually necessary.
How do you paint an old ceiling fan?
Remove Fan Blades. Turn off power to the ceiling fan at the circuit breaker. ... Clean Things Up. Wipe ceiling fan base & blades with a damp cloth until free of dust. ... Mask and Spray. For the ceiling fan base, mask with paper and tape. ... Spray Paint Blades. ... Cover Painted Blades with Rug Pad. ... Peel off Rug Pad.
Can I spray WD 40 in my ceiling fan?
Lubricate The Fan You can now go ahead with lubricating your ceiling fan. For doing so, use a long and thin nozzle to spray WD-40 into the oil hole. Make sure you do not spray a lot of liquid inside the hole as it may damage your fan.
How do you paint a hanging ceiling fan?
1:082:46How To Paint a Ceiling Fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you know what kind of pressure you're working with when you spray you want to spray six to eightMoreSo you know what kind of pressure you're working with when you spray you want to spray six to eight inches away from the surface. And work in a side-to-side motion across the fan.
How do you paint a ceiling fan?
Remove Fan Blades. Turn off power to the ceiling fan at the circuit breaker. ... Clean Things Up. Wipe ceiling fan base & blades with a damp cloth until free of dust. ... Mask and Spray. For the ceiling fan base, mask with paper and tape. ... Spray Paint Blades. ... Cover Painted Blades with Rug Pad. ... Peel off Rug Pad.
What kind of paint do you use on a metal ceiling?
Acrylic latex paintFirst and foremost, the right type of paint should be selected. Acrylic latex paint works well for bare metal roofs or painting over old paint coats. The combination of oil-based alkyd paint and a galvanized metal primer can work well too, ensuring that the paint is locked in and adhered in the right manner.
Can you use regular spray paint on ceiling?
0:549:07SPRAYING INTERIOR CEILINGS painting ceilings with a sprayer ...YouTubeStart of suggested clipEnd of suggested clipSo you don't have to block and spray it as much then going to cover a lot more distance. And leaveMoreSo you don't have to block and spray it as much then going to cover a lot more distance. And leave less black marks if there's gonna be any black marks. And we typically use a flat paint.
Can you use any paint for ceiling paint?
Ceiling paint isn't regular interior paint. Although you can paint your ceiling with the same paint that you used for your walls, regular wall paint is thin and has low viscosity, which means it will likely drip when you try to paint a ceiling.
Can you Paint the Metal on a Ceiling Fan?
Yes, you’ll be able to paint the metal body of a ceiling fan using spray paint.
How long to wait to spray paint a globe?
From there, press down on the spray can and spray paint your globe evenly. Allow the spray to sit for at least 10 minutes before applying a second coat.
How long do ceiling fans last?
While most ceiling fans are designed to last for an average of 20 years, some may give out with consistent use. When this happens, you may notice that the paint is chipping off, and scratches appear.
What is semi gloss primer?
The semi-gloss primer helps ensure that the newly applied paint will stick to the materials evenly. Using a thin layer of semi-glossy primer will create a ‘new’ effect similar to other ceiling fans.
How to get dirt off a globe?
Set the globe onto the newspapers and spray it down using a glass cleaner while using latex gloves. This will help get rid of any dirt or grime that has been building on the exterior. Spray on the glass cleaner and wait a few minutes.
Can you spray paint glass on ceiling fan blades?
As for the glass paint spray, you can get any color you like. This will be the main color that you want to use on the ceiling fan blades. You can apply this after the primer has finished drying.
Ceiling Fan Makeover How To
I cleaned the brass well, on both the fan and the vents. As you can see, I removed only the blades, and I covered the bulb sockets with tape. Of course, now I recommend taking the fan down and outside to spray the parts and then reinstall. But, I did not sand the brass.
Supplies
Note: These are Amazon affiliate links for which I receive a small commission for my recommendations, but it doesn’t increase your cost. See my Disclosure Policy for more information.
Update – Doing it Right This Time!
Ok, I made over the master bedroom ceiling fan and I took it down before spraying. Piece of cake! Took all of 5 minutes to remove it. Definitely the way to go. The only difference for this fan was I stained the blades with General Finishes Java Gel Stain and Topcoat to match the furniture I stained.
How to paint a t-shirt?
Paint all parts with white-colored primer. In an old t-shirt and gloves, shake up the bottle and test it on an area of old newspaper or cardboard. Once it’s ready to go, spray the blades and/or hardware pieces with a thin, even coat. Allow them to air dry .
How to keep screws from running away?
It's best to keep the screws all together in a bowl so none mysteriously run away from you. Keep it off to the side where it won't get hit by wide-swinging fan blades or small children.
How to strip a fan of dust?
Sand the blades with 120-grit sandpaper. This will help strip the fan of any leftover dirt, dust, or old, flaky paint. This part could be optional if you’re working with a fan that’s in very good condition, but for older fans, it makes the job much easier.
How do I clean a fan?
Clean the fan. With some multi-purpose spray and a damp rag, get to town on making that fan cleaner than it’s probably ever been. You don’t want to paint over dust, dead bugs, and grime. This goes for the blades, the brackets, switch housing cover, download, and anything else that you’re going to paint (even if you’re not painting certain parts, these could probably go for a cleaning anyway).
How many people edit wikihow?
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 13 people, some anonymous, worked to edit and improve it over time. This article has been viewed 66,540 times.
What to use to secure wires?
Always use electrical tape and wire nuts to secure wires.
What screwdrivers work faster?
A drill will make this go much faster, but a Phillips head screwdriver will work, too.
Tuesday
Last week there was a real cliffhanger here at the Ranch when I left the story hanging on what lights I picked from Parrot Uncle (you can read about that here ).
Updating Brass Ceiling Fans With Paint and Light
Last week there was a real cliffhanger here at the Ranch when I left the story hanging on what lights I picked from Parrot Uncle (you can read about that here ).
How to keep spray paint from getting on everything?
To help keep spray paint overspray from getting on everything for the spray painting part of the makeover, use large cardboard boxes to make your own spray booth. I flatten and save large boxes that I get. They can be reused many times and stored flat against the wall in your garage or workspace.
What brush keeps paint off black screen?
The flat short bristle brush kept the paint off the black screening. It was a little tedious, but very doable.
What is styrofoam used for?
It is used to cushion electronics and other fragile items that you buy.
Can you paint a ceiling fan?
If you want to see a colorful and fun way to paint a ceiling fan, check out this ceiling fan I did for my daughter’s room when she was little. It was one of the projects in my book, Instant Decorating.
Can I paint a fan by myself?
Doing it this way, I could paint the fan by myself. No electrical knowledge or re-wiring needed. All I had to do it turn the fan off and turn off the electrical panel breaker while I was working on it.
Can you use a long bristled brush to paint black screen?
Do not use a long bristled brush to do this. The long bristles will get onto the screen even if you try to carefully brush the paint on. The flat short bristle brush kept the paint off the black screening. It was a little tedious, but very doable.
Do you need a ceiling fan in the South?
Here in the south…ceiling fans are a necessity, especially if you don’t want to run the AC all the time. I like to have the windows open to get that fresh air feeling and turn off the AC when it is not super hot and humid. It is on these days that the ceiling fans are a blessing.
Why paint the ceiling the same white?
Having your ceiling and fan blades painted the same flat white color helps the blades blend into the ceiling and almost disappear. It also helps that I painted the ceiling the same white as the fan blades. I am not going to miss that flesh colored ceiling (and walls.)
How do I clean a fan blade?
Clean the fan blades, arms, and the brass bottom cover well with a damp rag and some multi-purpose spray cleaner if necessary.
