can you patch an aerobed

by Dr. Madge McCullough Published 3 years ago Updated 2 years ago

Can you patch an AeroBed?

Find the Puncture. In a spray bottle, mix together a cup of water with a cap of dishwasher liquid.
Patch the Puncture. With a clean, dry cloth, wipe down the surface on and around the puncture until it's completely dry.
Inflate the Mattress.

Leak repair with an adhesive patch for smooth PVC:

Clean off the bed with a dry paper towel and lay the bed flat on the ground. Cut the repair patch in a circle. Apply to the bed making sure there are no wrinkles. Use your thumb to apply pressure ensuring the patch is completely adhered to the PVC.

Full Answer

What tools do I need to repair or replace my airbed?

Apr 04, 2020 · How to Patch an AeroBed. Step 1 Find the Puncture. In a spray bottle, mix together a cup of water with a cap of dishwasher liquid. Step 2 Patch the Puncture. With a clean, dry cloth, wipe down the surface on and around the puncture until it's …

Can I use my Aerobed inflatable mattress as a permanent bed?

Apr 08, 2020 · How to Patch an AeroBed. Step 1 Find the Puncture. In a spray bottle, mix together a cup of water with a cap of dishwasher liquid. Step 2 Patch the Puncture. With a clean, dry cloth, wipe down the surface on and around the puncture until it's …

How to patch an air mattress that is leaking air?

Oct 04, 2012 · I got this bed for free, i cleaned it and I replaced the valve in the front of the bed so it can hold air.. If you own one of these beds, be prepared to get ...

What are the flammability requirements for Aerobed airbeds?

Oct 12, 2015 · About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators ...

How do you fix a hole in an aerobed?

Cut out a patch from the plastic material. Generally, you want the patch to be big enough to cover the hole with an added half-inch of plastic around the hole. Place a layer of adhesive around the outer edge of the patch. Carefully press the patch onto the surface of the air mattress, completely covering the hole.Mar 11, 2022

How do you seal a tear in an air mattress?

Fully inflate your mattress. ...
Spray the mattress with a soap and water solution. ...
Circle each leak with a pen or marker.
Fully deflate your mattress on a flat surface. ...
Cut a vinyl patch. ...
Apply adhesive to the area around the tear and to the back side of the vinyl patch.

Jul 17, 2017

How do you repair a fabric air mattress?

Following the directions on the bicycle repair kit, place a dab of contact cement on the area around the leak on the air mattress. Then, place a dab of glue onto the rubber bicycle tire patch. Allow both to dry (about 2-3 minutes). Contact cement works when you apply two sections that have the cement applied together.

What can I use to fix a hole in my air mattress?

Any thin plastic material will work. When making your own patch, be sure to make it big enough so that it completely covers the leaky area and actually overlaps it to ensure air tightness. Use super glue, gorilla glue, contact or rubber cement, or even epoxy as your adhesive.Jun 4, 2020

Will Gorilla tape patch an air mattress?

Is Gorilla tape good for an air mattress? Gorilla waterproof patch and seal tape works on vinyl and can be used similarly to duct tape. Do not add glue to the tape. Gorilla tape may damage the air mattress when removed, so don't use it if you plan to apply a patch kit later.Mar 30, 2021

Can you patch an air mattress with hot glue?

The best way to repair a hole in a leaky vinyl air mattress is with a repair kit designed for the product, but hot glue can stop the air leakage and temporarily repair the damage in an emergency.

How can I patch an air mattress without a patch kit?

You can use a DIY patch or a thin plastic to cover up holes. Another useful option is using hot glue to make sure all the leaks are concealed. But if you don't have the choice, you can use duct tape to stop the air from coming out of your mattress.

Can You Use Flex Seal on air mattress?

We do not recommend using Flex Seal on an air mattress as it is not for high pressure uses.

How do you use Gorilla glue on an air mattress?

Part of a video titled How to use Brown Gorilla Glue to Patch Air Bed Leaks Busted Seams ...

3:38

7:37

Just going to get a good bond through the center. And what you're going to do is leave that sitMoreJust going to get a good bond through the center. And what you're going to do is leave that sit there. And let the moisture activate that Gorilla Glue.

How do I fix a hole in my air mattress with nail glue?

How to Fix a Hole in an Air Mattress with Nail Polish

Step 1: Locate the hole in the air mattress. ...
Step 2: Mark the location of the hole. ...
Step 3: Clean the marked area around the hole. ...
Step 4: Use nail polish to fix the hole in the air mattress. ...
Step 5: Test if the puncture is fixed.

What is the fastest way to find a hole in an air mattress?

Part of a video titled How To: Locate and Repair A Hole In An Air Mattress or Float - YouTube

0:14

2:35

With water and then you're going to take your spray bottle. And you spray it over your air mattress.MoreWith water and then you're going to take your spray bottle. And you spray it over your air mattress. And wherever the hole is you'll see it bubble up.

STEP 1: Press upon the inflated airbed and listen for the leak

To locate the leak in the air mattress, start by applying gentle pressure to the mattress with your hand and simply listening. Inflate the bed and, starting on the bottom, where leaks are most likely to occur, listening for a quiet hissing sound. Do not lie on the bed to listen; that could enlarge the hole.

STEP 2: Or, try locating the leak with a moisture test

If listening fails to find the leak, dampen your hand or arm and pass it an inch or two away from the mattress from bottom to top. You should feel a cool burst of air at the source of the leak. Note the area with a marker, and then deflate your air bed and skip to Step 4. Otherwise, try one last trick.

STEP 3: As a last resort, identify the air leak using soap bubbles

If you’re still stymied, mix a few drops of dish soap with water in a small spray bottle. Working in small sections, spray the solution on the inflated mattress and gently press down. Escaping air from the leak will cause soap bubbles to form where the hole is located. Note the spot with a marker, and deflate the entire bed.

STEP 4: Clean around the hole

Clean a small area around the leak extending an inch or two beyond where your patch will be placed with a bit of diluted all-purpose cleaner and a lint-free rag, then dry the area completely with another dry, lint-free rag.

STEP 5: Patch the hole with a kit and strong sealant

If the air mattress came with a patch kit, use that to seal the hole, following the directions provided. You can also buy patch kits at mass merchandisers and online, or use a bicycle tire repair kit to do the job as well. And if you’re really in a pinch, use any thin plastic material, such as a tarp or a piece of shower curtain liner.

STEP 6: Test that the patch has completely adhered

Place a weight of 10 pounds or more (such as a dumbbell or stack of books) on top of the glued patch and let sit at least eight hours. You’ll want to be certain that the patch sticks, so you can’t be too cautious: Check your adhesive’s bottle to make sure you adhere to its recommendations for cure time, too.

STEP 7: Test that the patch has completely adhered

Once the glue has fully dried, remove the weight, re-inflate the bed, and sprinkle a small amount of talc or baby powder over the patched air mattress. Gently press down on the mattress; if the powder goes flying, you may need to re-apply the patch. If it stays put, you can literally rest easy on your success!

Can you use an airbed as a guest bed?

Aerobed inflatable mattresses are not designed to be used as permanent everyday beds but only to be used occasionally, as guest beds. If you are using an airbed over several days, you may need to occasionally add air as PVC stretches over time. My airbed seems to be leaking.

What to do if a PVC leak is not found?

If the leak is not found, check the side and bottom . If a leak is found, follow the steps below. Leak repair with liquid sealant for flocked or laminated PVC: Please note holes larger than 1/2 inches or cuts larger than 1 inch are unlikely to be repaired successfully.

Airbeds

Our air mattresses are easy to inflate and deflate and can also be adjusted to your desired firmness level. Stow them in the included carrying bag for easy storage. Available in youth, twin, full, and queen sizes.

Parts and Accessories

Repair and enhance your airbed experience by always having the right tools on hand, including pumps, valves, and adapters.

Knowledge Builders