How do you sink a hot tub in the ground?
Hot Tub Sinking AdviceLook For : Dimensions. ... Check For: Drain & PowerPoint Location. ... Choose: The Right Spa Lifter. ... Look For: Access For Service & Maintenance. ... The area where the hot tub will sit must also have good drainage. ... Look For : Lifting Straps. ... Check : Underneath The Hot Tub Regularly.More items...
Are in ground hot tubs efficient?
An acrylic above ground hot tub, while heavier than those made of vinyl or rotomolded plastic, also retains heat better, and so, will use less energy to keep your water warm in the long run. An in ground hot tub must be preheated, meaning the energy cost is a lot higher upfront.
How do you prep the ground for a hot tub?
The area where it will be placed should be leveled and a foundation prepared. A hot tub should not be placed on soil. Instead, it will need a concrete base, a crushed stone or pea gravel base, pavers or a deck with adequate structural support.
Can you place a hot tub on gravel?
Can you put a hot tub on a gravel base? Yes! Gravel makes an excellent base for a hot tub. Generally, gravel hot tub pads work best when using a combination of larger crushed rock for a supportive base and smaller landscaping gravel or pea gravel for a surface layer.
How long does an inground hot tub last?
Inground spas are built to last. Their durable concrete and steel construction typically provides decades of use. In fact, when it comes to concrete spa guarantees, pool contractors often offer structural warranties for 10 years. Top builders will give you a limited lifetime warranty.
How long does in-ground hot tub last?
A high-quality in-ground or above-ground hot tub can last up to 20 years. But 10-15 years is the average. Low quality or inflatable hot tubs will not last more than 5 years. Extend the life of a hot tub by maintaining properly balanced water, changing water every 3-6 months, and keeping the lid clean and moisturized.
Where is the best place to put a hot tub?
Your hot tub can be placed just about anywhere—outdoors or even indoors when practical. You can put it on a deck, patio, rooftop entertaining area, or even under a gazebo. The perfect spot for your hot tub all depends on your home and landscape design and layout, as well as your personal tastes.
What is the best base to put a hot tub on?
A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it's in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
What should I place my hot tub on?
Do's of foundations:Hot tubs must be placed on a solid, uniform, level surface. These adequate foundations are things like concrete floors, compacted crushed stone base, and decks/patios (if they are structurally sound to hold it). ... Place the tub on an elevated foundation so that water drains away from it.
How much does it cost to pour a concrete slab for a hot tub?
Hot Tub Concrete Pad Cost A concrete slab costs $5 to $10 per square foot or between $500 and $2,500 for a hot tub. Other options for a hot tub foundation pad are an existing patio, gravel base, pavers, reinforced deck, or plastic spa pad.
Are salt water hot tubs better?
Though they carry chlorine, salt water hot tubs and pools are gentler on the eyes, scalp, and skin. It fosters buoyancy, which can be very beneficial in the overall relaxation experience of the hot tub. Salt water does not produce an unpleasant odor.
How do you clean a built in spa?
0:033:19How To Vacuum Clean A Spa - YouTubeYouTubeStart of suggested clipEnd of suggested clipLeave it plug in to the pool that I was vacuuming and switch it over to the bot. And then drag theMoreLeave it plug in to the pool that I was vacuuming and switch it over to the bot. And then drag the water from the spa over into the pool. And that way I'm changing some of the water from the spa.
How big should a spa be?
Choosing a Hot Tub Based on SizeHot Tub Size RangesLengthHeightSmall (2-4 people)5'4” - 7”29” - 35”Medium (5-6 people)6'6” - 7'9”33” - 38.5”Large (7+people)7' - 9”36” - 38”Apr 25, 2018
When will hot tubs be available in 2021?
May 7, 2021. May 11 , 2021. A hot tub can add a beautiful water feature to your backyard. From the soothing sound of a waterfall feature to glowing LED lights, it can turn your backyard into a luxe sanctuary. But you want the hot tub to be less of the focal point and more of a place to enjoy your surrounding views.
What is a sunken hot tub?
A sunken hot tub allows you to enjoy an unobstructed view of the surrounding landscape as you soak away the stress. Choosing this type of installation allows for a custom look that you can enhance through your backyard design. Stone paths, a lush garden, or custom decking can complement the spa.
Do you need a hot tub cover?
You need a hot tub cover to keep out the elements, keep in heat, and keep family and pets safe. But a traditional hot tub cover and cover lift might not work for a recessed spa. Coordinate with your Master Spas retailer and contractor to find a safe, easy solution.
Can a master spa be recessed?
Master Spas hot tubs can be fully recessed or partially recessed into the ground or lowered into a deck. Choose a model that meets your needs and create the backyard oasis you have been dreaming of. When you choose a recessed installation, the spa will become a permanent fixture in your backyard.
Do hot tubs need a foundation?
Any hot tub needs a solid foundation that can support the weight of the spa when filled with water. The same is true if you choose to put it in the ground. A concrete vault will provide the support the weight of the spa and can be a part of your in-ground spa design.
Do you need a floor drain for a hot tub?
Partially or fully recessed installations need a floor drain system installed in the concrete pad. This system should be designed to move any water that may collect away from your hot tub. Why is this important? If the site has bad drainage, rain water can collect and damage the spa.
Can you move a portable hot tub?
A portable hot tub installed in the ground becomes a more permanent fixture of the landscape. If you plan to move or move the spa, it might not be the best installation.
How do you install a recessed hot tub?
A recessed hot tub can be an altering and a great addition to your deck or backyard. However, there is a set of prearrangement to do if you intend your tub to be not only inviting but also convenient:
How much does it cost to install a hot tub?
With a price that ranges between 6,000 and 20,000 $ , an in-ground hot tub installation is considered the most expensive among all hot tub installations. However, the price is mainly affected by the preparations and the work needed to prepare a site for the hot tub setup. For example, you might need to hire a professional to do electrical and plumbing installation that will cost you additional 250 to 350$. Moreover, hiring a professional contractor to make a cement foundation slab might cost you between 1,500 and 3,000 $.
Should you sink a hot tub into the ground?
Whether to sink or not your hot tub in the ground depends on your budget and a genuine reason behind wanting a hot tub. An in-ground hot tub has many benefits as well as disadvantages. For instance, an in-ground hot tub blends easily with the surroundings and highlights either your deck or backyard landscape. Moreover, it adds to the entire value of your property in case of selling the house and the backyard because, with added greenery, flowers, or lights that emphasize the tub during summer nights, it looks like a little, alluring oasis.
How much does it cost to build a prefabricated hot tub?
However, their prefabricated body makes them challenging to install because of the possible limited space if you already have a deck built. The cost for installing a prefabricated hot tub usually ranges between 3,000 and 10,000$. There are also additional expenses due to the installation procedure that might range from 3,000 to 5,000 $.
How much does a custom hot tub cost?
The starting price for the custom-built hot tubs is about 5,000 $, while the highest price depends on your budget and can reach up to 20,000 $. However, added features, the brand, and the size determine the final price. Custom-built hot tubs are made of concrete called gunite and are much larger than prefabricated but have fewer jets.
How thick should a concrete slab be for a hot tub?
The slab should be a minimum of four inches thick.
How wide should a hot tub hole be?
Before you start doing anything, be sure that you have the exact dimensions of your hot tub. However, the hole in the ground should be at least three feet wider than your hot tub on all four sides. This is to enable access to the mechanical parts of the hot tub in case of damage and maintenance and to be able to check regularly for rodents that might chew up the installations. You could place removable panels on four sides of the hot tub for easier access.
What is hot tub pad?
Hot tub pads are interlocking tiles which contain cavities that can be filled with gravel or pea shingle. To start you need to dig out a shallow and completely level area in the ground and then lay and interlock the right amount of tiles to stand the hot tub on with a little extra space around the edges. Once you have done this the pea shingle ...
Can you put a patio on sand?
However, a terrace/patio laid just on sharp sand will most probably not be stable enough to hold the weight of a full hot tub. The chances are that the patio slabs will move under the weight or possible crack leading to all sorts of issues.
Can a hot tub base move?
Now obviously a grass or earth base could take this amount of weight but the likelihood of it being completely level and not moving under the strain of the load is quite remote. The problem with the base moving is that it could then potentially put a great deal of stress on the hot tub frame and even the shell itself and once full of water and supporting the weight of the water the chances of the shell cracking or warping becomes increased.
Can a deck be built to hold a hot tub?
Decking – Decking is a really popular option but you need to be aware that an average deck will not be built to withstand the weight of a hot tub. You have two choices: The first is to stand the hot tub on the deck anyway but to completely reinforce the deck below or the second is to build a concrete slab or brick and mortar support beneath, ...
Can you put a hot tub in a shade?
If you live in an extremely hot climate you might well want to put the hot tub in an area of shade but most people will want to have it in a sheltered sunny spot. Remember that you will need an electrical connection as well as a hose long enough to reach from the tap to your hot tub to fill it up.
Can you build a hot tub on a concrete deck?
I’m sure that it would be possible to achieve but my sense is that it would be a safer long term bet to build a solid concrete/brick base beneath the hot tub and then to deck around it. If you do that you can be sure that the hot tub is sitting on the most secure foundation possible and the deck is only supporting the relatively lightweight of people sitting and walking around the hot tub.
Can a hot tub be supported?
At the very least the hot tub won’t be supported properly and this will potentially put excessive strain on the shell and could lead to serious damage. A hot tub should always be placed on a solid, level secure base such as concrete, a patio or terrace, a brick and mortar base or a well-installed and level hot tub pad.
How many volts does a hot tub need?
Hardwired hot tubs require the installation of a GFCI 220 volt circuit by a certified and licensed electrician. No matter the type of hot tub you have, you’ll need leeway to ensure the safe running of cables from the hot tub to the source of electricity.
When will hot tubs be available in 2021?
January 30, 2021. , in Hot Tubs. Although a hot tub is a practical device that lets you relax in warm, massaging water, it can also play an aesthetic role in the curb appeal of your property. While many hot tubs are installed without much thought put into how they look, utilizing some landscape design skills can transform an ordinary appliance ...
Can you put a hot tub in the ground?
Ideally, you won’t have any trouble with the components inside the hot tub shell. However, keeping those components accessible is an important thing to keep in mind when you’re sinking a hot tub into the ground. It can be easy to forget that the sides of the cabinet may need to be removed or that a person may need to get down in there and do below groundwork. Plan to leave yourself enough space to allow these possibilities to happen.
Measurement
The first thing you’ll need to do to prepare for sinking your hot tub into the ground is to compare the hot tub’s measurements with the area you’re working with. Not only will the hole need to fit the hot tub, but you’ll need extra space all around to allow for future service, running the electrical supply and to permit problem-free drainage.
Power and Drainage
You’ll need to account for the locations of your hot tub’s power and drain points when working on your excavation. Having enough room for the electrical cable to run from the hot tub to its connection point is something that’s not always properly thought out when digging. Same with the drain on your hot tub.
Access for Service and Maintenance
As mentioned, you’ll need to leave some space around all sides of the hot tub for the possibility of future service and maintenance. You’ll need enough space to be able to remove the cabinet panels and allow a person to get down in there and access the hot tub’s inner workings.
Hot Tub Cover Considerations
A hot tub cover is one of the most important accessories associated with a hot tub. Not only does it provide safety by keeping our children and animals, but it will also play a major role in retaining heat and preventing the accumulation of airborne contaminants.
Stereo Speakers
Some models of hot tubs feature speakers on the outer edges of the hot tub cabinet. This might not be completely compatible with a sunken hot tub. If you choose a hot tub with built in speakers, you’ll need to consider their positioning when planning your excavation. Speakers located several feet below ground may not be entirely functional.
Lifting Straps
Lifting straps will help you lower the hot tub into position. It’s probably a good idea to leave them there in case there’s an eventual need to lift the hot tub out again. Speak to your hot tub dealer about the use of lifting straps and the appropriate type for your model.
Why do people use above ground spas?
Generally speaking, most people who choose an above-ground spa do so for one of several important reasons, such as portability, ease of installation and lower costs. Still, it’s important to look at all the pros and cons of this type of hot tubs to see whether it’s right for you.
How many jets are in a hydro massage?
Usually feature between 30 and 100 jets, ensuring everyone can enjoy a relaxing hydro massage
Can you go wrong with a hot tub?
At the end of the day, you really can’t go wrong with either style of hot tub. Both above-ground and in-ground models will still provide all the same benefits to your health, happiness and overall well-being, making the decision to buy a hot tub one of the most rewarding decisions you’ll ever make.
What is the best place to put a hot tub in the ground floor?
The best place in your ground floor is the bathroom. Usually, a bathroom already has ventilation. Most other rooms in the house will be damaged by moisture. But if you can’t put the hot tub in the bathroom, a dehumidifier can help (check out our advice for the basement).
What is the best way to connect a hot tub to the outside?
Outdoor water connection is through a standard garden hose. This can be used for both filling and draining the hot tub.
What is a good hot tub heater for winter?
If you live in a cold region like Saskatchewan with winter temperatures often falling below 10*F, and you still want to soak in your hot tub, you will need a powerful hot tub with 3kW-5kW heater, which are 240V. A good example of a winter-approved hot tub would be the AquaRest 300.
How much does an inflatable hot tub weigh?
An empty inflatable hot tub weighs about 65 to 100 pounds. That means you can carry the tub to any place you want by yourself. It’s good for use in cases of limited space, especially inside the house. When an inflatable hot tub is filled with water and has two persons inside, its typical weight is 2,500 lbs.
How many amps do I need for a hot tub?
240V models are more powerful and heat quickly, so most of them have to be wired directly to the power supply. You must have more than 15 amp GFCI (38-60, depending on a hot tub ). You will also have to connect an RCD (residual current device) six feet from the bath. For this type of work, you should have an electrician do the installation.
How wide is a hot tub?
Hot tubs are typically delivered on their sides resting on a wheeled base. For a standard delivery, you will need to have a clearance width of at least 42 inches and a clearance height of at least eight feet from the road to the place where the hot tub will be installed.
Can a hot tub be dropped on grass?
A hot tub cannot just be dropped on your grass plot (or even pressed soil) without proper preparation.
What is a bullfrog spa vault?
It is a kit made of galvanized steel that surrounds your hot tub so it will not corrode, but remain safe and secure when installed in-ground.
Can you feed fish in a Long Island hot tub?
Placing the spa entirely in-ground (in a Spa Vault) was a truly inspired idea. These Long Island Hot Tub clients can actually feed their pond fish while soaking in their rejuvenating spa waters. Talk about “Ahhhhh.”
Is Bullfrog a portable spa?
In addition to portable spas being more budget friendly, when it comes to Bullfrog Spas, for example, there’s their inter changeable massage jets and easy ongoing maintenance, as well as energy efficiencies to attract you. It’s just that some Bullfrog owners also want their portable spa to look like a custom built-in.
Can you put a spa over a fire pit?
Sometimes what you want to do is match your spa installation to the style and materials already existing in your backyard. In this case, an above-ground surround was fitted over a Spa Vault in order to complement the beautiful fire pit and seat walls. This method is also a great option for those who prefer to step up — rather than down — into their spa. Photo: Bullfrog Spas
Can a portable spa drain from the tub?
Portable Spa Plumbing: Being self-contained, a spa unit has all it needs inside itself. However, the rain needs to be able to drain away from the tub. If not, plumbing could be damaged.
Can you use a portable hot tub in the pool?
If you already have a pool and don’t want all the headaches of linking a custom in-ground spa to the functions of the pool, recessing a portable hot tub allows you to have the in-ground look — as well as use your spa all year round without having to heat up the pool. Photo: Bullfrog Spas
