Yes, cast iron weights do rust. However, you can greatly prevent the rusting process by keeping the plates dry. So make sure your plates aren’t in the yard where it can get wet and moist. Apply coating such as black oxide, chrome, or zinc to prevent rusting.
How do I keep my weight plate from rusting?
Not Oiling: It is important that you occasionally wipe your barbell, plates, and dumbbells down with 3-in-1 oil. The oil provides a protective coating against rust. Generally, once a month is recommended for oiling. However, this varies depending on usage and climate.
Does cast iron plates rust?
Metal plates are made from cast iron, steel, or chrome, although cast iron and steel are the most popular. What is this? Iron or steel plates are most commonly used in powerlifting and are also called powerlifting discs. Although they are susceptible to rust, they won't chip or break easily.
How long do cast iron weights last?
Not only do they come in hexagonal, round, and 12-sided patterns, but they also come in a variety of weights and adjustable options. Durability – Cast iron dumbbells are made to last. Unless you leave your dumbbells outside or consistently drop them, you can expect your dumbbells to last a lifetime.
How do you get rust off of cast iron weights?
Soak the dumbbells in a 50-50 solution of water and vinegar overnight. ... Take the dumbbells out once they're sufficiently soaked, and use a wire brush to scrub off the rust. ... Wipe the dumbbells thoroughly with a clean cloth, and spray a generous amount of WD-40 all over the dumbbells, letting it sit for 15-20 minutes.More items...•
Whats better cast iron or rubber weight plates?
There's a reason bumper plates are a bit more expensive than cast iron. Overall, they're safer, quieter, more durable, and more comfortable to use. Bumper plates are far superior for olympic weightlifting movements as well as workouts where barbells are repeatedly picked up and dropped (such as CrossFit).
Will cast iron weights rust outside?
If you leave them outside or in the garage it will be a problem. The main thing is to keep them dry. If you can find a place for them indoors they will do better. How long can I use a lodge cast iron?
Will cast iron weights rust in garage?
Yes, your gym equipment will absolutely rust in your garage. Especially, if you live in a hot and humid environment. Even more so if your garage isn't part of your Central AC (most are not).
Are cast iron plates worth it?
Getting equipment with high durability is often worth the extra cost. The good news is that Cast Iron Plates are cheaper than the alternatives but are also highly durable. Some people might express concern over iron plates rusting.
Are cast iron weight plates good?
Sure, they won't look as cool on the barbell, but the thinner width of cast-iron plates will allow you to load more wheels for bar-bending deadlifts and squats. Plus, they cost less than bumper plates. This makes them a great option when you are just starting to invest in a home gym.
Does it matter if weights are rusty?
So, if you're considering buying weights or dumbells for your home gym, don't avoid the rusty ones. And if you're considering getting rid of your weights because they're rusty, don't do it!
Is cast iron ruined if it rusts?
Even a well-seasoned pan can rust if it's left in the sink to soak, put in the dishwasher, allowed to air dry, or stored in a moisture-prone environment. There's no need to throw away a cast iron skillet that's a little (or a lot) rusty.
Does WD-40 Remove rust cast iron?
WD-40 Specialist® Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing. Great for removing rust from tools, metal, cast iron, chrome parts, and more without harming paint, gaskets, trim, or other surrounding parts.
Is cast iron safe if it rusts?
In fact, with a few simple tools and a little elbow grease, there are plenty of ways to thoroughly remove rust from cast iron. Experts at the University of Illinois at Urbana-Champaign agree that a little bit of rust on cookware isn't likely to harm you. (Even rust in drinking water isn't considered a health hazard.)
Is cast iron rust proof?
Any form of iron can rust when exposed to oxygen and water molecules. Cast iron is a combination of iron, carbon and silicon. Though it's known for its resistance to wear, it can rust.
Are cast iron plates durable?
Cast iron is the classic choice, giving the purists the “clang” of plates hitting plates and also generally being cheaper. There are also steel and even chrome-coated options, but these are significantly more expensive. However, they do provide added quality in terms of being rust-resistant and more durable overall.
Does cast iron rust away?
The easiest way to remove rust from cast iron is to soak the pan in a 1:1 vinegar and water solution. Then scrub the rust off with a scrubby sponge, scrub brush, or steel wool.
Can you mix vinyl and cast iron weights?
Yes, you can mix vinyl and cast iron weights as long as there are an equal number of cast iron and vinyl weights on each side of the bar. For example, there shouldn’t be 10kg of cast iron weights on one side and 10kg of vinyl weights on the other side of the bar.
Vinyl weights pros and cons
It’s still the same amount of weight when compared to expensive options
Cast iron weights pros and cons
If you’re a complete beginner to lifting, vinyl weights will cost significantly less and still allow you to progress. If you’re been seriously lifting for 1+ years, cast iron weight will be a better option as you’ll be able to load more weight onto the bar.
What to use to remove rust from a car before painting?
Before and after rust removal with citric acid powder. This is before he painted it, only soaking and wiping it off.
How to get rid of oil on a plate?
If you didn’t already treat the surface with a rust reformer, get rid of any oil or dirt on the plates by wiping them down with a rag soaked in a very light solution of dish soap, and dry well with a lint-free cloth. Put down some drop cloths or cardboard. You will make a mess. Do it in a well-ventilated area.
Can you bake plates before painting?
Think about spraying on universal bonding primer before the paint itself. The manufacturer of your plates probably didn’t do it originally, but look where that got it. However, they almost certainly baked on the paint for maximum hardening, which you won’t be doing. (Please don’t cook your painted plates in your kitchen oven)
Do you have to brush off rust?
You don’t have to try to brush off the rust! Just brush off the loosest surface rust, and then do this…
Is brass harder than steel?
Your plates are iron. Nylon and brass are softer than iron, while steel is harder than iron.
Can you spray paint metal?
Now, spray paint it! Do one side, wait a day, flip and do the other side. Go with a nice metallic color that is formulated to work well on metal surfaces.
Can you brush off rusty paint on old weights?
On older weights you got at a garage sale, the paint might be flaking off, likely with rust growing underneath. If that’s the case, don’t try to just brush off the flaking areas. You’ll just get more flaking, and rust only gets worse if any is left. You don’t want rusty flakes of paint stabbing into your hands.
Is it hard to remove rust from weights?
Surprisingly, it wasn’t that hard to remove the rust. So, If you’re trying to get a discount on weights, don’t let the rusty ones deter you from buying them. It’s a smelly process, but totally worth it. Follow the instructions below to try it yourself.
Can you spray paint weights?
While not necessary, I recommend taking some extra time to spray paint the weights. We used Rust-oleum 2x Paint + Primer. It’s desgined to cover rust and it’s worked well for us.
How much does a 250 pound iron plate cost?
With that being said, a 250lb set of traditional iron plates will cost $450-650 to your door. While the same set of 250lb bumper plates can range from $600-900.
How big is an iron plate?
Iron Weight Plates: These plates sometimes referred to as traditional plates always have a 2-inch (50mm) diameter to fit a legit Olympic barbell. Iron plates come in a variety of sizes, shapes and materials which we'll cover below.
What are bumper plates?
Bumper plates were created in response to Olympic weightlifting where lifters often drop the bar after a (un)successful lift. Bumper plates made their way to the mainstream with the rise of Crossfit. These plates are made to withstand the impact of hitting the floor. Bumper plates have a metal core that is covered by rubber or urethane.
Why are bumper plates better than traditional plates?
Better for Olympic Lifts: Allows users to drop the barbell without having to worry about damaging the floor or chipping the weight as the material will absorb the impact.
What is the difference between a weight plate and a bumper plate?
Another difference is that all weight sizes of bumper plates will have the same diameter unlike iron plates, once again due to the dropping factor. As mentioned before, traditional plates sometimes come with built in handles but bumper plates are always solid which makes a little more difficult to handle if moving the larger plates. Another very visible difference between bumper plates and traditional plates is color.
Why do weight plates have bevels?
The reason for weight plates to have a bevel is twofold; to aid you getting a grip on the plate when it’s lying flat on the floor and to make it easier when pulling plates off the barbell. Holes/Handles: We aren’t talking about the center hole of weight plates here.
What size are bumper weight plates?
Bumper Weight Plates: These plates also will have the 2-inch (50mm) diameter as they were created for the purpose of Olympic style weight lifting. Bumper plates have become more popular over the last decade as they are super durable and versatile.
Why does my cast iron pan rust?
Water causes rust with cast iron pans, and if you leave your pan wet it will just get rusty again. Re-season your pan. Unfortunately, removing rust removes the seasoning of a cast iron pan. After treating it with salt, apply a small amount of vegetable or olive to the pan using a paper towel.
How to get rust off cast iron?
Cut a potato in half. The potato will be coarse enough to rub away rust as you rub the salt into the cast iron. Place it on the cast iron cut side down and scrub the salt in to remove rust. Use a great deal of pressure as this will help scrape off the rust. Rub the potato in a circular motion.
How to get rust off a pan?
If you don't have vinegar, fill the pan with hot water and baking soda. Let it soak for about 5 minutes, then scrub the rust away with a sponge.
How to clean rust off cast iron pan?
To clean rust off of cast iron, sprinkle a thick layer of salt over the surface of the cast iron pan. Next, cut a potato in half and place one of the cut sides of the potato face-down on the skillet. Use the potato to scrub the salt over the skillet to remove the rust.
How to clean cast iron pans after removing vinegar?
After removing the cast iron from the vinegar, wash it right away. Scrub your pan with mild detergent and soapy water to remove any lingering vinegar residue. Use a gentle scrub brush or sponge. Rough sponges can damage cast iron. Place the cast iron in the oven.
How to store a pan?
Store the pan safely. Store your pan away from water to prevent rust. Place a paper towel in the pan when you store. This will keep the pan free of dust, minimizing how often it needs cleaning.
How to make a cast iron pan?
1. Sprinkle salt on the cast iron. The precise amount of salt you need varies depending on the size of your pan. Sprinkle salt to the point the surface of the cast iron is covered in a somewhat thick layer. For example, about half a cup of salt would be used for a 12 inch cast iron pan.
Will Your Weights Rust Outside
The answer here is unfortunately a very simple one – yes, your weights and equipment will rust if left outside.
How do You Store Weights Outside
Covers for your weights and gym equipment can be quite costly, but there is a simpler and much cheaper option, which is to cover the weights in a waterproof material.
How to Keep Weights From Rusting Outside
No matter how hard you try to cover your weights and equipment, if you are storing them outside then the process of oxidization and rusting is always going to be a potential threat.
Products to Prevent Rust on Weights
The most basic products you should always have on hand when it comes to maintaining your weights and equipment are a can of 3-in-1 mineral oil and some microfiber cloths. This lubricating oil should be your go-to product when wiping down your equipment regularly and is very budget-friendly.
Final Thoughts
If you are short on home gym space and want to know how to keep weights from rusting outside, the easiest solution is to treat them with an anti-corrosion solution which will provide a layer of resistance against rust and then store them in a cool and dry place when not in use.
Why do Olympic weight plates rust?
If your Olympic barbell or weight plates have started rusting, then it is probably because the coating has worn away. In these situations, the goal is to scrub away the rusty spots without further wearing away the coating.
How to remove rust from steel?
The first step in removing rust is to brush the rust off the iron. A lot of people recommend using a steel brush to remove the rust. However, steel is harder than iron. While it will easily remove the rust, it is also going to scratch up your equipment. It will remove the knurling from your bars!
Why Is Your Gym Equipment Rusting?
Home gym equipment varies drastically in quality. However, most are made from steel which will rust. Iron weights will definitely start to rust quickly.
How to get rid of rust on stainless steel?
Stainless steel contains approximately 10% chromium, so it should resist rust. However, rust can still form on stainless steel. Step 1. Soak the Barbell. Make a solution of 50% water and 50% vinegar (you can also use Coke or lemon juice). You’ll want to soak the rusty weights or barbell in this solution.
What tool removes rust?
Dremel tool: If there is a lot of rust, you can save yourself some time by using a Dremel to remove many layers of rust at once. Just be warned that this will definitely remove knurling.
How to get rid of rust on a sandpaper?
If scrubbing alone won’t get off the rust, then you can apply a solution of 50% vinegar and 50% water to the affected area .
What is the best way to clean rust off a car?
Alternatively, you can use a product called “rust converter” or “rust reformer.” This will cause a chemical reaction which turns the rust into a compound which can be easily wiped off.
E-Coat Machined Iron Weight Plates
Machined iron weight plates with a gorgeous, glossy black e-coat for ultra rust resistance and precise 50.5mm center hole.
Features and Benefits
Originally made for the automotive industry, e-coating has become increasingly popular due to its great durability and excellent rust resistance. Although it’s applied in a thin layer, the smooth texture still allows the natural grit of the iron underneath to be felt.
