For example, one KitchenAid counter-depth side by side refrigerator ( model KRSC700HPS) lists four different depth measurements:
- 21 3/4 inches: Depth to back of hinges. Box itself, nothing else. No doors, no handles.
- 26 7/8 inches: Depth with doors.
- 29 9/16 inches: Depth with doors and handles
- 23 3.4 inches: Depth without doors.
What is the difference between counter depth and standard depth refrigerators?
Counter-depth vs. standard depth refrigerator Counter-depth refrigerators are about 24–25 inches deep, approximately the same depth as kitchen counters. While counter-depth fridges are virtually flush with counters and cabinets, standard-depth refrigerators are typically 30–36 inches deep and can stick out half a foot or more past countertops.
How deep should a refrigerator be?
You also may see refrigerators with overall depths of 30 7/8 inches (LG), 28 7/8 inches (Samsung), or 31 1/4 inches (GE), all marketed as countertop-depth units. If you are very particular about matching your refrigerator to the profile of the cabinetry and countertops, there are several issues to consider.
How do I choose the right size fridge?
Step one: Measure the width of the space. Find out how much space you have to spare from counter top to counter top, or counter top to wall, depending on where your fridge is going to go.
Can a fridge open all the way?
A fridge is pretty useless if you can’t open it all of the way. Ensure that there’s enough space in front of the fridge for the doors to open, including both swing doors and pullout doors, especially if you have a kitchen island. Before your refrigerator fits in your kitchen it has to fit in the door—and in all the spaces in between.
Do fridges have different depths?
Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.
What depths do fridges come in?
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What are the two depths of refrigerators?
If you've shopped for appliances lately, chances are you've encountered rows of standard-depth refrigerators. These models can range in depth from 30 to 34 inches in depth, compared to the 23 to 27 inches seen with counter-depth refrigerators.
How far out should a refrigerator stick out from cabinets?
Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
Why is counter-depth more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
What is the difference between a standard depth and counter-depth refrigerator?
The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity. Either way, your refrigerator is essential to storing all your fresh ingredients.
What is the difference between full depth and counter-depth refrigerator?
Counter-depth refrigerators are shallower and wider than standard-depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.
How far should a refrigerator be away from the wall?
two inchesThe refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
How deep is a counter-depth fridge?
The total depth of a counter-depth refrigerator is typically under 30 inches, including the doors and handles. To allow the refrigerator doors to open sufficiently, the refrigerator box will need to extend at least an inch or two beyond the front of your countertop.
What is depth of counter-depth refrigerator?
What is a Counter Depth Refrigerator? Most counter depth refrigerators, including KitchenAid brand counter depth refrigerators, are around 24-30 inches deep. While shallower than a standard size fridge, it offers a seamless configuration between your kitchen cabinets, without having to remodel.
How far can refrigerator stick out?
While counter-depth fridges are virtually flush with counters and cabinets, standard-depth refrigerators are typically 30–36 inches deep and can stick out half a foot or more past countertops.
What is the difference between counter-depth and standard depth refrigerators?
The biggest difference between counter-depth refrigerators and standard-depth refrigerators is the depth of the refrigerator. Counter-depth refrigerators are generally shallower and standard-depth refrigerators are generally deeper.
How big is a refrigerator?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations. Top- and bottom-freezer refrigerators are more often available in smaller sizes.
How to cool down a refrigerator without overheating?
Add a little space on all sides for proper ventilation so your refrigerator can cool things down without overheating.
What happens when a refrigerator is standard depth?
When a refrigerator is standard depth, it will be deeper than neighboring counter and cabinets, sometimes protruding into the main traffic area and that can create a bottleneck of sorts in that kitchen space.
How deep is a refrigerator?
When it comes to compact, under-counter refrigerators, coolers and freezers, these are usually referred to as cabinet-depth and though these can vary from the standard, most will be 24 inches so that they will be flush with the cabinetry once installed, much the same as a built-in dishwasher. And since most freestanding wine coolers are ...
What is counter depth refrigerator?
A counter-depth refrigerator is a full-size model with or without a freezer compartment. This style of a refrigerator has become quite popular but there are pros and cons to consider before shopping for one.
Why do people choose a counter depth refrigerator?
Many will choose a counter-depth refrigerator simply because this style gives the kitchen a more uniform profile. The refrigerator does not protrude several inches past the counter. More convenient access to contents. Finding and retrieving contents from a counter-depth refrigerator is much easier. It requires less extended bending.
What is a crisper drawer?
A crisper is generally a drawer that can help produce stay fresh in the refrigerator. It usually has a separate humidity control from the rest of the refrigerator, so you can adjust the humidity level to suit the type of produce in the drawer (e.g., leafy greens do best with high humidity).
How deep is a counter depth?
The term counter-depth, though widely used amongst retailers, can be misleading because the actual measurement can vary somewhat from the standard counter depth of 25 inches.
Is it easier to access a door bin or a refrigerator?
The same applies to longer door bins that might be easier to organize and access. If a traditional style refrigerator is your choice, accessing the full interior of a door-access bottom freezer will be much easier.
