The reason is because risers can provide several advantages related to a septic tank that include:
- Risers raise the height of the septic tank lid.
- Risers help prevent the buildup of frost.
- Risers make tank waste go away quicker and easier.
What is a septic riser?
Septic risers are large-diameter "wells" that are placed over a septic tank inlet baffle access port (and possibly outlet) to permit easy access for septic tank pumping, inspection, and baffle repair. If the septic tank happens to be buried more than just a few inches below ground surface,...
How do you install a septic tank riser?
Installing a riser is similar to any routine septic tank maintenance procedure. If you do not know where your tank is located, a septic tank technician can find the tank by probing the ground with a bar or using an electronic locating device. The ground around the access hole is then dug up. Next, the riser replaces the lid to the access hole.
How much soil do I need to bury a septic tank riser?
This is in essence a requirement that no more than 6" of soil cover is used to bury the septic tank riser top if it is not in fact brought to or above the ground surface. A large diameter riser is 24" or more in diameter.
What is the best brand of septic tank risers?
Another brand of septic tank risers, lids, and adaptive rings that many people use and you could shop and compare to the Tuf-Tite septic tank risers is Polylok septic tank risers and lids. Do I need to install a septic tank riser on my septic tank?
See more
Are septic risers necessary?
Installation of a septic tank risers is a highly recommended feature for your septic system. A septic tank riser will facilitate easy maintenance and monitoring of your septic system making it much more convenient and easier.
Do all septic tanks have risers?
Septic tank risers must be made to withstand the elements. Typically, they have materials that take a long time to degrade, such as plastic or concrete. Risers almost always come with new septic tank installations, but many homes with septic systems made in the last decade did not come with risers.
Should septic tank riser be above ground?
Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.
How many risers do I need on my septic tank?
A single riser is required for accessing the pump chamber for this type of system. If you don't have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.
Can you add a riser to a septic tank?
Square plate adapters with round openings are now made for this purpose. Some types of risers are cut to order based on the height you need, and some come in 6-12-inch increments. NOTE: You will need to measure the size of the hole in your septic tank. Then buy the Adapter and Risers slightly larger than the hole.
What is the purpose of a septic riser?
A septic tank riser is a pipe made of either plastic, fiberglass, or concrete. It creates a vertical portal at the ground surface for easy access to the septic tank for inspection and pumping out. The lid is then either left exposed or with a very thin layer of soil and grass over it.
Do septic risers smell?
If you notice a strong odor in the area of your riser, it may just be an issue with the cover itself. If it's not secured properly or is broken, any openings or cracks would allow for the odors in your tank to be released into the air above ground.
How tall should a septic riser be?
Tank risers are typically installed about 3 inches above grade. Having the lid above grade will make it easy to find, however, some people will choose to have the lid just a couple of inches below grade so that is easier to mow over and less visible. Over time, the lid can become covered by grass or other ground cover.
How much weight can a septic riser hold?
The 24-inch solid fiberglass DuraFiber riser lid from Orenco Systems has a flat-style lip for PVC and HDPE pipe. It weighs 10 pounds, but resists damage from lawn equipment and can withstand a 20,000-pound load.
How much are concrete septic tank risers?
Septic Tank Riser Cost The cost of a septic tank riser can vary, depending on the size, the material, the style, and your installer. Plan on spending at least $150 for a basic model, but know that they can cost up to $400, depending on the model you choose. If you have a double septic tank, double that number.
How do you hide a septic tank riser?
Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view. Place a light statue, bird bath or potted plant over the septic lid. Septic tank risers and covers are an alternative to concrete and blend into green grass.
How do you put a riser on a concrete septic tank?
9:1010:30How to Install Risers and Lids on Concrete Septic Tanks w/ Round HoleYouTubeStart of suggested clipEnd of suggested clipStep three clean up the riser where it's going to contact the glue as well as the ring adapter. AndMoreStep three clean up the riser where it's going to contact the glue as well as the ring adapter. And then step four apply your mastic around the inner lip of the plastic ring adapter.
How do I find my septic tank riser?
You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.
How do you hide a septic tank riser?
Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view. Place a light statue, bird bath or potted plant over the septic lid. Septic tank risers and covers are an alternative to concrete and blend into green grass.
Do septic risers smell?
If you notice a strong odor in the area of your riser, it may just be an issue with the cover itself. If it's not secured properly or is broken, any openings or cracks would allow for the odors in your tank to be released into the air above ground.
What is a cleanout riser?
0:134:22MSDGC Cleanouts - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen a pipe becomes clogged a two-way clean-out can be used to fix it a clean-out is an access pointMoreWhen a pipe becomes clogged a two-way clean-out can be used to fix it a clean-out is an access point into your plumbing system that allows a homeowner a plumber to check and clean the pipe as needed.
Why do septic tanks need risers?
Because septic tanks are buried underground, locating and accessing tank lids for inspection and pumping can be a potentially difficult, time-consuming, and costly endeavor . Fortunately, the simple addition of a septic tank riser provides an easy, cost-effective solution to this problem that will provide long-term savings.
What is a septic riser?
What Is A Septic Tank Riser? A septic tank riser is a concrete or plastic pipe that runs vertically from the pump-out openings or access ports at the top of a septic tank to about ground level. A simple and seemingly common sense concept, risers are often missing from standard septic tanks, particularly older models.
How to find a septic tank?
If you do not know where your tank is located, a septic tank technician can find the tank by probing the ground with a bar or using an electronic locating device. The ground around the access hole is then dug up. Next, the riser replaces the lid to the access hole.
How to contact FloHawks about a septic riser?
If you are interested in having a septic tank riser installed and would like a free quote, call the professionals at FloHawks anytime at 1.800.356.4295 or Schedule Your Service online. Categories: Uncategorized.
How often should a septic tank be inspected?
However, the riser will soon pay for itself through savings on subsequent maintenance and inspections. Septic tanks should be inspected at least once a year, and pump-outs should typically occur every three to five years for an average family of four.
Where is the riser on my lawn?
A common solution to this problem is to situate the lid of the riser a few inches below the surface of the lawn.
Can you put a riser on a septic tank?
With a riser lid just below the ground, the lawn can be maintained as usual, and accessing the port will require only minimal effort when it comes time to pump or inspect your tank. As you can see, there are several good reasons to install a riser on your septic tank and just a few minor cons to keep in mind.
Why do you need a septic riser?
Septic tank risers allow for easy ground-level access and improved visibility into the performance of your septic system.
How much does a septic tank riser cost?
Your septic system is one of the most important mechanical systems in your home. With a one-time installation fee, a septic tank riser will protect your septic system for years to come. The quick access for maintenance and pumping will almost immediately provide a return on your investment. You can also say goodbye to costly and unsightly digs at maintenance time. Even during the winter months when the ground is frozen, you’ll be able to conduct a visual check of your septic system. The out-of-sight out-of-mind approach to your septic system leads to long-term problems and expensive emergency calls for repair. A septic tank riser is a relatively simple fix that will protect your system and save you money.
Why do you need a visual reminder of your septic system?
Why would you want a visual reminder of your septic system? Well, routine septic system maintenance prevents premature septic system failure. With a septic tank riser, you’ll not only know the location of your septic system you’ll have a visual reminder to schedule your system to be pumped at least every 2 to 3 years.
What is a septic riser made of?
Risers are typically made from either plastic or concrete. They are large round pipes fitted over the septic tank cleanout opening and are long enough to extend the cleanout opening to the ground level. The benefits then are: The last benefit may seem a bit counter-intuitive.
Can you check a septic system in the winter?
Even during the winter months when the ground is frozen, you’ll be able to conduct a visual check of your septic system. The out-of-sight-out-of-mind approach to your septic system leads to long-term problems and expensive emergency calls for repair.
What is a septic tank riser?
Definition: Septic tank "risers" are large diameter enclosures placed over the septic tank access covers to permit easy septic tank inspection and cleaning without having to "dig up" the septic tank at each occasion.
What happens if a septic tank riser is not above ground?
Watch out: If the septic tank riser cover is NOT above ground there is risk of surface runoff and groundwater leaking into the septic tank, flooding and destroying the system unless the cover is water-tight.
What are septic risers made of?
Watch out: Occasionally, as you'll see in photos here, septic tank risers are made of other materials such as stacked concrete blocks or even wood. Generally these are unreliable and often they're very unsafe.
How big is a septic riser?
Small septic pumping risers that are just 4" or 6" in diameter are easy to install and cheap, but they do not permit inspection of the tank baffles, and their small diameter makes it difficult for the septic pumper to actually clean out the floating scum layer and sludge layer when the tank is pumped.
How big is a septic tank access?
If you meant to say that your septic tank access openings are quite small, perhaps just 15" in diameter, that might be the case but you can and should install a larger diameter access or tank riser; it is very difficult to manipulate tools and pumper tank hoses to do a good septic tank cleanout job thorugh a small tank opening.
How deep is a septic tank?
Indeed we've seen septic tanks partially above ground, and others buried more than six feet deep. It's not necessarily a mistake, and deep septic components may be required by site conditions, but here are some considerations when the septic tank is more than a foot below ground surface:
Where to dig down to expose septic tank?
Dig down to expose the septic tank cleanout cover - this may be at the inlet and outlet ends of the tank or more often over the center of the septic tank.
How to measure a septic riser?
When purchasing a septic tank riser system there are a few measurements that you must take. The first is the size of your opening. Take a measurement of the opening in your septic tank at its widest point. It is important to measure the opening and not the existing lid. You will be removing the existing lid, so its dimensions are irrelevant and can differ from the size of the actual opening. The second measurement will be the height between the septic tank and ground level. With these two measurements you are ready to make a purchase!
Why aren't septic risers flat?
This piece is important as the risers are not flat on the bottom because they are designed to be stackable, so it is not possible to mount them directly to the septic tank. The adapter ring gives you the flat surface you need to mount to the tank while also being able to accept the stackable risers.
How tall are polylok risers?
The Polylok risers come in 6’’ tall and 12’’ tall and in 24’’ diameter and 20’’ diameter. They are stackable and each unit comes with a pre-installed gasket and stainless steel screws for mounting. Use the height measurement that you took between the septic tank and ground level to determine which risers will work best for your application.
Why are polylok risers important?
These internal structural ribs allow the outside of the riser to be smooth, this is important because of the freezing and thawing of the ground in many areas. When the ground freezes and thaws it expands and contracts and products with structural support on the outside of the riser can actually be lifted from the tank causing damage to the riser and the seal. The Polylok products will have no issues in frost areas because they are completely smooth on the outside!
What is access lid on riser system?
The access lid on a riser system is one of the most important components, because it is what you see in your yard and also what you have to remove every time the system is pumped or maintained. The Polylok lids come with pre-installed handles that allow you to easily remove the lid any time you want to access the system. The lids are structurally supported on the bottom which also allows them to be relatively flat, instead of domed shaped like many other products on the market.
What are septic risers made of?
Tired of having to dig up your yard every time you need your septic tank pumped out or serviced? Tired of handling extremely heavy concrete lids? Sounds like you are in need of septic tank risers to bring your access to ground level! Our septic tank risers and covers are made from high quality, heavy duty polyethylene plastic which makes them very strong and durable while also allowing them to be easy to handle.
How big is a round tank adapter ring?
We have two different styles of adapter rings and which one you choose to order will depend on the measurement of your opening. Our square tank adapter ring can cover large square openings up to 25’’ or large round openings up to 27’’. The round tank adapter rings come in 24’’ and 20’’ diameter and are designed to be placed around 24’’ diameter openings or smaller.
4. What are the benefits of a septic tank cover and riser?
When you install a septic tank riser, you bring the access point up to the surface and allow for better accessibility.
5. How do you find your septic tank?
If you’re searching for the septic tank cover to perform maintenance, it can take a little bit of work to find it.
7. How do you install a cover?
Before you can install a cover, you must first install a riser on a septic tank.
Additional Resources
If you are looking to buy affordable land, you can check out our Listings page. And before you buy land, make sure you check out Gokce Land Due Diligence Program. If you are looking to sell land, visit our page on how to Sell Your Land.
