In GE dryers, the thermal fuse–sometimes called a safety thermostat–is located behind the drum on the inside of the dryer. To access the thermal fuse you will need to open the dryer from the top. Though it may sound a bit daunting, opening the top of the dryer to reveal its inner workings is surprisingly simple.
How to test a dryer fuse?
- Unplug the dryer and remove the front access panel.
- Locate the blower cover--it's the large object facing you at the bottom of the dryer.
- Remove the wires from the thermal fuse terminals to test it.
- Set your multimeter to the R x 1 scale and touch the leads to the thermal fuse terminals to test for continuity.
What size fuse should you use for a dryer?
look at the makers rating plate, or at the instruction manual. If a domestic drier sold in the UK market the load will most likely be in the region of 2.5 to 3 kW, which is about 13A. The nearest fuse cartridge you will find in the High Street will be 13A. So everyone uses that.
How to test GE dryer thermistor temperature sensor?
The steps include:
- Prior doing anything, check the rated value of the device (100Ω, 1KΩ, 10KΩ).
- Set resistance value close to its rated resistance value. If this is not possible, meaning that the thermistor cannot get close to the rated value, the thermistor is malfunctioning and ...
- Now, apply heat to the thermistors. ...
How do you replace a thermal fuse on a dryer?
- Unplug the garments dryer’s energy wire from the wall outlet.
- Swing the entrance panel out in direction of you to be able to look into the compartment.
- Purpose a flashlight on the flat-can-like part to find the blown thermal fuse.
What is a thermal fuse?
How to open a thermal fuse?
What is a thermal fuse on a GE dryer?
Where are the clips on a dryer?
Who is Megan Mattingly Arthur?
See 2 more
About this website
How do I know if my dryer fuse is blown?
1:042:10Dryer Not Heating? Thermal Fuse Testing, Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fuse has continuity. If the needle does not move or the digital display does not changeMoreThe fuse has continuity. If the needle does not move or the digital display does not change significantly. There is no continuity. Which means the fuse has blown out and will need to be replaced.
Does a GE clothes dryer have a fuse in it?
Common solutions for: Troubleshooting Help GE Dryer Won't Start. The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer's heat source such as the heating element on electric dryers or at the burner on gas models.
Is there a reset button on my GE dryer?
How do you reset a GE dryer? Turn the dryer off, then on again to reset it. Or you can press the reset button on the dryer plug. If this does not clear your error, see the troubleshooting guide below.
Why won't my GE dryer turn on?
If the dryer is humming but not actually working, it's time to check the drive motor. First, inspect the drive belt to ensure it hasn't snapped, worn down, or simply slipped. If it seems to be intact, you may have a defective drive motor that needs to be replaced.
Where is fuse located on GE dryer?
1:163:25How To: GE Dryer Fuse WE1X21975 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOther most common possibilities could include a bad door switch a bed timer. Or a bad motor. So weMoreOther most common possibilities could include a bad door switch a bed timer. Or a bad motor. So we are the back of the dryer. And the fuse is located. Behind this cover box.
Where is the fuse panel on a GE dryer?
In GE dryers, the thermal fuse--sometimes called a safety thermostat--is located behind the drum on the inside of the dryer. To access the thermal fuse you will need to open the dryer from the top. Though it may sound a bit daunting, opening the top of the dryer to reveal its inner workings is surprisingly simple.
How do you change a fuse in a GE dryer?
0:512:25How to Replace a Dryer Thermal Fuse - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the fuse off of the blower housing. Install the new thermal fuse. Position the new fuse andMorePull the fuse off of the blower housing. Install the new thermal fuse. Position the new fuse and secure it with the screw push. The wires onto the connection spades on the top of the new thermal fuse.
Will dryer start if thermal fuse is blown?
A gas dryer will run but won't heat if its thermal fuse blows because the dryer overheated (usually because the vent is clogged, so check the vent path). Use a multimeter to check the thermal fuse and replace the thermal fuse if you don't' measure continuity.
When I press the start button on my dryer nothing happens?
If the dryer still doesn't start, there are several possible reasons, from a door switch that's not recognizing that the door is closed to a failure in the main electronic control board. A broken power cord, failed push-to-start switch or a bad timer can also prevent the dryer from starting.
Why did my dryer stop working all of a sudden?
A faulty or broken thermostat can make a dryer stop working. Replacing the fuse or the thermostat will allow the dryer to work again. A blown thermal fuse from overheating indicates an additional problem, such as improper ventilation.
What would cause my dryer not to turn on?
The most common reason your dryer—or any appliance—stops working is that it's unplugged. It sounds simple, we know. But make sure to check if the cord or plug has come loose. If so, plug it back in.
What is wrong with dryer that won't turn on?
The first issue to check for when a dryer won't start is whether the power cord is properly plugged in, directly connected, or showing signs of serious damage. Also, a dryer requires a lot of electricity to operate, so it may have tripped the breaker when pulling the necessary power.
How do you change a fuse in a GE dryer?
0:512:25How to Replace a Dryer Thermal Fuse - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the fuse off of the blower housing. Install the new thermal fuse. Position the new fuse andMorePull the fuse off of the blower housing. Install the new thermal fuse. Position the new fuse and secure it with the screw push. The wires onto the connection spades on the top of the new thermal fuse.
Where is fuse located on dryer?
On electric dryers, the thermal fuse is often located on the blower housing or near the heating element. On gas models, the thermal fuse can be found on the blower housing or near the burner. To reach the fuse on some dryers, you can simply uninstall the appliance's rear panel or a lower front access panel.
How do you reset the fuse on a dryer?
2:484:55Reset Dryer Thermal Fuse / Switch (Dryer won't heat fix) - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe'll. We'll trip it. Again all right so just tripped blow my dust away here. And we'll grab ourMoreWe'll. We'll trip it. Again all right so just tripped blow my dust away here. And we'll grab our little drill. Bit. So right here is a little 1 16. Like i said i did 3 30 seconds now i did 1 16.
What happens when thermal fuse blown on dryer?
A thermal fuse will blow when the temperature gets too high, not when it's drawing too much current. When it blows, the dryer stops generating heat. It's necessary to replace it before the dryer will run again. The thermal fuse is different from the thermal cutoff.
GTD42EASJ2WW GE Dryer fuse location - Applianceblog Repair Forums
Hi Folks, Our dryer quit working. However the light and door sensor do function. I am having an issue locating the Fuse/Fuse Holder or any kind of a thermal fuse. It is not located under the power cover in the back of the dryer. Any help, complete with pictures, movies, or a small theater group...
What happens if a dryer blows a fuse?
If it blows, the dryer won’t start no matter how many times you reset it. But how can you determine whether or not the fuse has blown? This is what you should do:
Does A GE Dryer Have A Reset Button?
A GE Dryer has a reset button. This doesn’t apply to every single GE dryer. Some models (DBSR453EB3WW) do not have reset buttons. Check the manual to find out whether yours has a reset button and where it is located.
Can You Reset A GE Dryer?
You can reset a GE dryer by simply pressing the reset button. But if you don’t know where the reset button is located, turn the dryer off. Unplug the appliance completely. Reconnect it to a power source and turn it back on. This is enough to reset it.
Where Is The Reset Button On A GE Dryer?
You find the reset button on the control panel. You can also check the plug. Apparently, you can find the reset button on the front. Again, don’t be afraid to check the manual or to consult the manufacturer. If you can’t find the reset button, they will tell you where to look.
Why Should I Reset My Dryer?
Resetting the dryer will solve a lot of basic glitches and problems. You see this in brands like Samsung. It isn’t just a GE solution. Glitches in electronic devices happen all the time, especially when a power outage occurs.
Why won't my dryer start after power outage?
If you tried resetting the dryer the normal way after a power outage and it refused to start, more than likely, the thermal fuse has blown. The thermal fuse is a very important component that prevents overheating.
What can prevent a GE dryer from running?
2). Have you checked the plug? Loose wires and a blown fuse can prevent the plug from giving the GE dryer the power it needs to run.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Have a question?
There was a problem completing your request. Please try your search again later.
Why won't my dryer start?
1. DOOR SWITCH. The door switch is perhaps the most obvious culprit for a dryer not starting. If the dryer can't detect that the door is securely closed , it simply won't do anything. Try using a multimeter to detect current continuity.
Why do dryers have thermal fuses?
Most dryers are equipped with thermal fuses as a safety measure. These fuses blow when the dryer reaches unsafe temperatures. Afterwards, they have to be replaced before the dryer will be operable again. A blown fuse will not have any continuity when tested with a multimeter.
How to tell if dryer is working?
The drive motor turns the drum as well as the blower wheel. If the dryer is humming but not actually working, it's time to check the drive motor. First, inspect the drive belt to ensure it hasn't snapped, worn down, or simply slipped. If it seems to be intact, you may have a defective drive motor that needs to be replaced.
What to do if your dryer is not working?
So, don’t wait around: let's find out what could be happening. First, open the dryer door. If the light turns on, you can rule out a power issue. If it doesn't, check the power supply and reset the breaker.
What brands of appliances does GE repair?
We fix all GE Appliances brands: GE, Profile, Café, Monogram, Hotpoint, Haier, and Adora.
What to do if your board is burning?
It's tricky to conduct a DIY test to see if the board is causing the problem, but you may see signs of burning or scorching if something is amiss. The only remedy is to replace the board, which will likely require the attention of a trained technician.
Can a dryer be repaired with a switch?
The switch itself could be to blame. Test it with a multimeter (or get a specialist to do it). If there's no continuity, your dryer could be repaired with a simple replacement start switch.
Will the dryer run if the thermal fuse is blown?
While a blown thermal fuse is the most common reason a dryer won’t start, run, or heat, you should remove the fuse from the appliance and test it to determine if it has blown or not before purchasing a new one. On electric dryers, the thermal fuse is often located on the blower housing or near the heating element. On gas models, the thermal fuse can be found on the blower housing or near the burner. To reach the fuse on some dryers, you can simply uninstall the appliance’s rear panel or a lower front access panel. However, many dryers will require you to fully disassemble the appliance, removing the top panel (and, possibly, a control panel as well), a front panel, a front bulkhead, and the dryer’s drum before you can access the fuse. That’s the hard part. To uninstall the fuse itself, you will simply unthread one or two mounting screws and disconnect the power wires from the fuse’s terminals.
What does it mean when a dryer fuse is blown?
If the meter display shows zero Ohms of resistance, the fuse has electrical continuity and has not blown, indicating that another component in the dryer is likely defective and preventing the appliance from running or heating. If the meter display shows no significant change, the fuse has no continuity which means it has blown and will need to be replaced.
What is thermal fuse?
This safety device protects the appliance from overheating and potentially damaging the motor or other sensitive components. If your gas or electric dryer begins to overheat, the thermal fuse is designed to open, or “blow”, interrupting the voltage and preventing power from reaching the motor and heating components.
What to use to test a thermal fuse?
Once you’ve removed, or isolated, the thermal fuse from the dryer, you can use a multimeter to test the component for electrical continuity – a continuous electrical path present in the part:
Where is the thermal fuse on a gas dryer?
On gas models, the thermal fuse can be found on the blower housing or near the burner. To reach the fuse on some dryers, you can simply uninstall the appliance’s rear panel or a lower front access panel. However, many dryers will require you to fully disassemble the appliance, removing the top panel (and, possibly, a control panel as well), ...
Do you have to disassemble a dryer?
However, many dryers will require you to fully disassemble the appliance, removing the top panel (and, possibly, a control panel as well), a front panel, a front bulkhead, and the dryer’s drum before you can access the fuse. That’s the hard part.
Why is my dryer vent clogged?
Make sure that the vent is clean and that it has an unobstructed path. It’s also possible that the fuse has reached its end of life, or that there’s some other failure in the appliance that’s making it overheat. If the dryer doesn’t have clearance on all sides, or if it’s too close to a furnace, that might be a contributing factor.
Why does my dryer blow a thermal fuse?
A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.
What is thermal fuse?
The thermal fuse is different from the thermal cutoff. The thermal fuse stops the dryer from operating, tumble and heat included.
What to do if fuse is blown?
If you can identify the underlying problem, fix it first. Then you can replace the fuse. If the fuse is blown, other components responsible for heat have probably been stressed. Replacing those components could save another repair in the near future.
How to tell if a fuse is blown?
If it shows less than one ohm, the fuse is still working and the problem lies somewhere else. If it shows an infinite amount of resistance, then the fuse is blown.
How to test if a fuse is failing?
The simplest test is to remove the fuse and use a re-settable fuse in it’s place. That’s not a fix, just a way to test for the real issue causing the fuse to fail, and it’s very dangerous to bypass the fuse for normal operation!
Do you have to be logged in to post a comment?
You must be logged in to post a comment.
What Is A Thermal Fuse and How Does it Work?
The thermal fuse in your clothes dryer is a small device that is sensitive to temperature. Clothes dryers have thermal fuses to prevent the dryer drum’s heat from going over a set temperature. This small sensor protects your clothing and your home from possible damage.
How to check if a dryer has a thermal fuse?
The only safe and reliable way to test the thermal fuse in your clothes dryer requires removing the fuse. With the fuse out of the dryer, you can use a multimeter to check the fuse. Often it is impossible to tell the condition of a thermal fuse from the outside.
How many volts does a clothes dryer use?
Before you do anything else, make sure that the clothes dryer has power. Most clothes dryers operate on 220 volts. Check your service panel and make sure that the circuit breakers have not tripped out.
What happens if a multimeter is silent?
If the multimeter remains silent, the thermal fuse is probably bad. If the thermal fuse is not allowing any current to pass, the clothes dryer will not heat. At this point, you should purchase a replacement thermal fuse. Install the new thermal fuse in the reverse order that you removed the old one.
Why is my dryer not getting hot?
A little diligence and work can help you find a simple problem with an easy fix in your clothes dryer. A clothes dryer that operates but doesn’t get hot is many times a bad thermal sensor. The thermal fuse should be the first thing you check in these circumstances.
How to test a thermal fuse in a dryer?
Testing the thermal fuse in your clothes dryer is a simple matter using a multimeter. Set the multimeter to test for continuity. A bad fuse will not have any continuity and needs replacing.
Why do clothes dryers have thermal fuses?
Clothes dryers have thermal fuses to prevent the dryer drum’s heat from going over a set temperature. This small sensor protects your clothing and your home from possible damage. Typically, thermal fuses come in different styles, shapes, and designs.
What is a thermal fuse?
In GE dryers, a thermal fuse is a safety device that is set to cut off the flow of electricity from the dryer's heating mechanisms if the dryer reaches a predetermined maximum temperature. Advertisement.
How to open a thermal fuse?
To access the thermal fuse you will need to open the dryer from the top. Though it may sound a bit daunting, opening the top of the dryer to reveal its inner workings is surprisingly simple. To open the dryer top you will need a flat-head screwdriver, putty knife or similar tool. Insert the screwdriver or putty knife underneath ...
What is a thermal fuse on a GE dryer?
Chances are, your problem is a blown thermal fuse. In GE dryers, a thermal fuse is a safety device that is set to cut off the flow of electricity from the dryer's heating mechanisms if the dryer reaches a predetermined maximum temperature.
Where are the clips on a dryer?
These clips are usually located about four inches in from either side of the top dryer panel. Apply pressure to the clips to release them. Once the clips have been released, lift up the top panel and use the supports to keep it upright. Look inside the dryer, behind the drum, to find what looks like a round metal pan.
Who is Megan Mattingly Arthur?
Megan Mattingly-Arthur. Megan Mattingly-Arthur has been writing professionally since 1998. She has contributed to various publications, including "Teen Voices" and "Positive Teens" magazines, as well as a book, "The Young Writer's Guide to Getting Published.".
