Full Answer
What size jointer do I need to join Wood?
Jointers come in the following cutting widths: 4, 6, 8, 10, 12, 14, and 16 inches. A jointer is capable of face or edge jointing wood that is no wider than the cutterhead. To joint boards up to twice as wide as your cutting head, you can make a jig. Four and six-inch jointers are intended for home workshop use.
What size Grizzly jointer do you use?
I currently have a Grizzly 6 incher. I put a lot of thought into the purchase between 6 and 8 inches and went with 6 because I figured that most of the parts I would be using for furniture were 6″ or under. Those that were wider were substantially wider and the jointer to handle those was way out of my space and price ranges.
Does the size of your jointer determine your manhood?
Mark, Thanks for your response. I was just pointing out that the size of you jointer does not determine your manhood. Sounds like jointer envy. And yes the old masters would have used modern jointers. I enjoy your videos. Your a talented craftsman. I think if you stopped trying to be funny I would enjoy them even more.
Is there a difference between a 6″ and an 8″ jointer?
Sadly the 8″ models seem to be rarer & more expensive than the 6″, so going with a used jointer might help to even out the cost difference. We lucked out and found a 10″ used Inca jointer-planer combo on Craigslist.
What is a good size for a jointer?
An 8-inch wide jointer allows me to joint wider boards than a 6-inch jointer, and 8-inch jointers usually come with longer infeed and outfeed beds, adding more support to the lumber. And 8-inch jointers are usually affordable enough for hobbyist woodworking shops.
Is an 8 jointer big enough?
Ultimately, you'll use whatever width jointer you buy over and over again, and the larger machines will offer more bed capacity. But 8-in. machines “rule the roost” of most hobbyist shops these days — and for good reason. They're practical, affordable and for the most part, sufficient for what we need them to do.
What can you do with a 4 inch jointer?
9:3715:07What Does a Jointer Do? - Ask Matt #13 - YouTubeYouTubeStart of suggested clipEnd of suggested clipBuilding process it sets the foundation for everything that comes later on all of your joinery isMoreBuilding process it sets the foundation for everything that comes later on all of your joinery is going to be basically based on what you can do here at the jointer.
What is a 6 inch jointer used for?
Jointers come in many shapes, sizes, lengths, and heights, but the most common size you'll see is a 6” jointer. That means that the blades are 6” long and the widest material that the jointer can handle (for a face joint) is 6”. For most hobbyists or intermediate woodworkers, this will work just fine.
Are table top jointers worth it?
Q: Is a benchtop jointer worth it? A: Yes, benchtop jointers are excellent tools even for beginners and hobbyists to own. They will make woodworking more efficient and precise showing clear advantages over hand planing or processing lumber on a router table.
How do I choose a wood jointer?
0:008:326 Features to Check Before Buying a Jointer | Woodworking - YouTubeYouTubeStart of suggested clipEnd of suggested clipLumber with flat faces. Straight edges and square corners will help most woodworking projects comeMoreLumber with flat faces. Straight edges and square corners will help most woodworking projects come together more accurately. And the way to achieve these kinds of reference surfaces is to use a power
Will jointer square a board?
0:354:40How to Square Lumber with a Jointer | Woodworking - YouTubeYouTubeStart of suggested clipEnd of suggested clipProcess where you're squaring up and flattening the wood. In a way that leads to a perfectly squareMoreProcess where you're squaring up and flattening the wood. In a way that leads to a perfectly square flat board usually the first step in this process with the faces is to hop on to the jointer.
Do you really need a jointer?
Most woodworkers know that you need both a planer and a jointer to get the most out of rough lumber (at least for power tool users). The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first.
Can you run end grain through a jointer?
Would you use a jointer on end grain? Definitely no. Granted, some species will be more prone to splitting across the end grain than others, but in general it's too dangerous. Don't joint the individual strips.
Can I use a table saw as a jointer?
Using Your Table Saw as a Jointer. Even if you own a jointer, you'll want to master this technique. With the addition of a simple shop-made fence, you can easily edge joint on your table saw. Remember that man-made materials like plywood can be hard on steel jointer knives – but not on carbide table saw blades.How to use Your Table Saw as a Jointer - Woodworker's Journalhttps://www.woodworkersjournal.com › how-to-use-table-...https://www.woodworkersjournal.com › how-to-use-table-...
How much does a 6 inch jointer cost?
Compare with similar itemsThis item Powermatic 54A 6-Inch Jointer, 1HP, 1PH 115/230V (1791279DXK)PORTER-CABLE Benchtop Jointer, Variable Speed, 6-Inch (PC160JT) #1 Best SellerPrice$1,899.99$319.99$319.99Sold ByAmazon.comAmazon.comItem Dimensions66 x 24 x 37.5 inches32.1 x 12.4 x 11.2 inchesNumber of Items114 more rowsPowermatic 54A 6-Inch Jointer, 1HP, 1PH 115/230V (1791279DXK)https://www.amazon.com › ...https://www.amazon.com › ...
Is a jointer better than a planer?
The jointer will give you a perfectly square single edge and flatten that single side, whereas the planer will give you consistent thickness and parallel surfaces. Jointers have their cutting knives embedded in the table with the wood passing over them, whereas planers cut from above the wood.What Is The Difference Between A Jointer And A Planer? - Obsessed ...https://www.obsessedwoodworking.com › what-is-the-diff...https://www.obsessedwoodworking.com › what-is-the-diff...
Is G0609 a good DJ30?
G0609 is a good 12" cheaper "new" solution if you do not want a combo. I found a deal on new DJ30 and bought it. I love it.
Is a jet a good combo?
as clarion said a combo is a good way to go sometimes. Another good combo is the jet
Can a jointer cut a warp?
But yes, can't do a great job on long pieces, but more importantly, can't do the faces. Can a larger jointer? Yes, it can make a flat face on any twist, cup, warp, etc. of course if the board is long, and the warp is large, you won't have much left of your original board after it is flat. Better to cut the board to shorter lengths according to your cut list, then flatten it. What else will it do? Not much normally. But I run most rough wood thru the jointer first, then the planer. As to edges. Certainly it can make a nice straight edge, but it can tear the grain too on lots of type of wood. A Good table saw can make a nice straight edge too, perfectly good enough for gluing. As to a finished edge, an edge sander can then make that edge nice. So to my mind, a jointer is actually more useful for me for faces than for edges.
Can you use a router table for edge jointing?
Another option would be to get your hands on the best planer you can afford, and use alternative jointing methods such as using a planer and a sled to face joint, edge jointing can be done with a router / router table.
Which is better, 8" or 6" jointer?
If you are planning on doing your hobby more seriously perhaps an 8″ jointer is the better choice, but it all depends on your budget and how often you buy wider than 6in lumber.
What is jointer used for?
I think you may have missed the tongue-in-cheek tone in Alan’s comment. But to address the rest of your comment, jointers are used for the initial face and edge, not just the edge. A planer is then used for the subsequent face.
Can you run away with Jet 10?
Yes, I have thoughts on the Jet 10″ combo unit..run away as fast as you can!
What Size Brick Jointer Do I Need?
The jointer you choose should be the same size as the gap between the bricks. Most brick jointers can handle gaps ranging from 3/8″ to 7/8″.
What Is a Brick Jointer?
A brick jointer is a handheld, non-powered tool used in masonry construction to improve the aesthetics and integrity of a brick or stone structure.
Do you need a jointer for woodworking?
You start the whole procedure by flattening a face. This is the reference point for everything else that you do. So yes you do need a jointer. If you plan on sticking with woodworking then buy the best you can afford. I would buy a 8" machine and look for a bed lenght of 75" or better.
Do you need a jointer to build cabinets?
If you want to build kitchen cabinets, a jointer is far nearer to essential than many other machines you bought . If you take a close look at your store-planed stock, I think you will want to do an awful lot of sanding before finishing. When you rip it, the two parts won't necessarily remain straight either.
Do you need a jointer to make wood?
You start the whole procedure by flattening a face. This is the reference point for everything else that you do. So yes you do need a jointer. If you plan on sticking with woodworking then buy the best you can afford. I would buy a 8" machine and look for a bed lenght of 75" or better.
Should I buy a six inch jointer?
If you are as well-heeled as you must be, I would suggest buying a six-inch jointer for your current project. See FWW issue #160 for tool tests. After you have used it for a few years, you may decide whether to go bigger or not. If you do go bigger, why even think about anything as small as an eight-incher? Furthermore, take a look at FWW issue #175 for a very clever alternative solution for those times when a six-inch jointer won't do.
