how can i hide the wires from my ceiling

6 CLEVER Ways to Hide Electrical Wires on Your Ceiling!

Full Answer

Can you hide exposed electrical wires on the ceiling?

Having exposed electrical wires on a ceiling can be distracting and unattractive. Luckily, there are some clever ways to hide electrical wires on your ceiling. So, if you’re looking to hide exposed wiring from light fixtures, speakers, or a television, then this is for you!

How do you hide wires on a wall with a cord?

Hiding wires on a wall with a cord cover is uncomplicated and can be done in a short time. Measure the wall to determine the length of the cords you want to cover. Cut the cord cover to match the length you just measured. Use a pencil to mark the anchor points on the wall. Use a level to ensure they are straight.

How do you hide wires on a ceiling fan?

1. Use cable ties: Use cable ties to bundle cords and snip off the ends as needed. 2. Conceal with flex tubing: Measure the length of the cords you want to conceal, then measure and cut flex tubing to match the length. 3. Wrap around the wires: Pull the tube apart and wrap around the wires that were tied together.

How do you hide electrical wires with crown molding?

The crown molding usually adds decorative flair, but it also serves the purpose of hiding ugly gaps between ceilings and walls. However, you can also use crown moldings to hide electrical wires. By placing these wires along the ceiling edges behind the crown molding, you can have a sleek, minimalistic look without the eyesore of wires and cables.

How do you hide exposed electrical wires?

8 Genius Ways to Hide Every Wire in Your HomeHook cords to the back of your furniture. ... Corral cables behind the couch. ... Hide TV wires in plain sight. ... Run TV wires inside the wall. ... Tuck cord chaos into tubing. ... Slip them into a drawer. ... Snake them through baseboard accessories. ... Stash wires and routers in “books.”

How do you hide unsightly wires?

How to Disguise Unsightly Wires & CordsFor the entertainment system: Bring in baskets. Wrap wires together and conceal them with a cord cover until they're hidden behind the TV stand, then organize them into groups and hide them in open-top baskets. ... For bedside chargers: Add a planter. ... For a power strip: Hang it up.

Can you hide electrical wire behind crown molding?

1:518:33How to Conceal Electrical Wires with Crown Molding | Ask This Old HouseYouTubeStart of suggested clipEnd of suggested clipIt's it's an OK solution but not the best in your case it's not attractive.MoreIt's it's an OK solution but not the best in your case it's not attractive.

How can I hide the wires in my living room?

10 Ways To Hide Electrical Cords In Living RoomPut them in a basket. ... Use the back of the sofa. ... Conceal the wires using covers. ... Run wires through or behind the TV stand. ... Purchase a cord management kit. ... Thread the wires behind the wall. ... Place the cords in a drawer. ... Run the cords through your accessories.More items...•

How do you make cords look neat?

Fasten Cables to Walls With Coaxial Cable Staples. ... Guide Cords Along Delicate Surfaces With Command Strips. ... Secure Bundles of Cables With Zip Ties or One-Wraps. ... Use Painter's Tape in a Pinch. ... Set Up Enough Power Strips. ... Label Your Cords. ... Use Bread Bag Tags if You Don't Have a Label Maker. ... Store Unused Cables in a Shoe Rack.More items...•

How do you hide wires behind baseboards?

Using a Raceway System to Run Wires Position raceway along the top of the baseboard. Attach the raceway using adhesive or screws, according to manufacturer's instructions. Open the raceway and feed the cable into it, leaving enough cable at the end for proper connection. Snap the cover back closed.

How do you hide wires in baseboards?

Soft cord covers work best for hiding cords that aren't in the way of foot traffic. They often cover cords leading to chandeliers, for example, or hide TV wires. To effectively use soft covers along baseboards, secure a bit of peel-and-stick Velcro to the edge of the cover and to the baseboard every 12 inches or so.

How do you hide TV wires with decor?

7 Stylish Ways to Hide TV Wires Without Cutting the WallMake a Wood Frame and Cover It in Fabric. ... Install a Raceway and Paint It the Same Color as the Wall. ... Hide TV Cords Behind Other Objects. ... Turn Your TV Wires Into a Wall Art. ... Conceal TV Wires Behind Wall Trim. ... Camouflage TV Cords and Cables.More items...•

What do you do with unsightly wires?

Install wall-mounted cable plates on each of the holes and run the cords through the top plate down through the lower plate. If your cords are on the shorter side, opt for an in-wall power and cable kit, which adds an outlet directly behind your television.

How do you hide wires in a wall?

How to Hide Wires in a WallUse a stud finder to find a spot between two studs in the wall. Mark the wall where you want the upper and lower holes to go. ... Attach a drywall hole saw bit to a power drill. ... Insert the cord or cords through one of the hole covers. ... Insert the hole covers and push firmly into place.

How do you hide TV wires with decor?

7 Stylish Ways to Hide TV Wires Without Cutting the WallMake a Wood Frame and Cover It in Fabric. ... Install a Raceway and Paint It the Same Color as the Wall. ... Hide TV Cords Behind Other Objects. ... Turn Your TV Wires Into a Wall Art. ... Conceal TV Wires Behind Wall Trim. ... Camouflage TV Cords and Cables.More items...•

How do I hide the wires from my wall mounted TV?

A useful idea for hiding cables when mounting your tv on a wall is to use plastic cord covers that attach directly to the wall above it and conceal the wires. The cord covers can be purchased online or at your local hardware store.

Why do you need exposed ceilings?

Exposed ceilings give your house a rustic look when done right, and it also saves you some money. Without needing to spend on materials and labor to cover your ceiling, you can use that money to hide the wires instead and buy other things to enhance your house. However, you need to keep in mind that your wires need to follow safety precautions ...

What are some good covers for ceiling fans?

Decorative boxes work great in covering exposed ceiling wires in groups. You can create a standard square box that will match your ceiling beams, or you can purchase cover plates like Arlington Boxes or Garvin Hole Cover on Amazon. Grouped wires are perfect for ceiling fans and light wires, but you may find that they look good even in places without grouped wires.

What is decorative ceiling?

Actual exposed ceilings rely on the beams to support the house, and no other material covers the ceilings. Meanwhile, decorative ceilings are just as they’re called: decorative. You’ll find that these houses already possess a covered ceiling and simply have additional beams to make it look like an exposed ceiling.

What to do if you have wires in your ceiling?

If you’re bothered by your ceiling wires poking out in an exposed ceiling, one option is to paint the wires. This boosts your house’s aesthetics without consuming too much money or time. To do this, all you need to do is buy paint that matches your ceiling beam’s color. This camouflages your wires and keeps a simple ceiling.

How to place wires in hard cover?

If you choose the hard covers, you can place your wires within them by measuring the length you need and cutting the covers accordingly. Then, slide the cover open and simply place the wires inside the covers before sliding them closed again.

Can you paint a cord cover raceway?

Cord Cover Raceway and Paintable Cord Concealer both come as white sets of cord covers. You can paint them however you want to match your decor, or you can keep them that way for an accented look on your ceiling beams if the beams aren ’t white. Meanwhile, Coordinate Fabric Cord Cover adds an aesthetic look to your house. You can choose to either make them camouflage themselves or have them stand out on their own.

Is it better to paint ceiling wires or ceiling beams?

The advantage of painting your ceiling wires or even ceiling beams is that you can choose a uniform color for your ceiling or design it. However, some disadvantages include paint expense and labor fees if you hire someone to do it. There’s also a chance that you won’t like the outcome.

How to hide wires behind a computer?from wikihow.com

Stick a cable catch at the back of your desk to hide wires behind it. Sometimes, you just need a basic cable management solution. If you've got wires hanging from your PC down behind your desk, stick cable catches on the back of the furniture. These look like small circles with a slit across the center. Stick the flat side of the catch to your desk. Then, push the wires through the slit so they run down the length of the desk instead of dangling.

What does it mean to use cardboard to make a fake wall?from organisemyhouse.com

Simply adding a fake wall using cardboard painted the same as the wall means that you can hide a load of wires without any type of cabling or boxing in needed.

How to hide cords on computer?from wikihow.com

Gather the wires that are hanging from your PC and clip them together. Then, pull back one of the binder handles and press it flush against the back of your desk. Hammer a nail into the desk so the binder clip hangs from it and hides your cords.

How to mount wires to wall?from dailyhomesafety.com

Before mounting the wires, draw an outline on the wall with a pencil that can be erased easily. Measure the length of the cords (you can easily do that with a string) and plan the artwork accordingly. You can mount the wires to the wall with wall clips or mounting tape.

How many cable channels are there in a raceway?from echogear.com

There are 3 cable channels that are each 48", and various connectors to handle any turn, corner, or cable intersection. Want to know the best part? Baby got adhesive back (bad Sir Mixalot pun). These have an adhesive back that sticks right to the wall. You can leave the screwdriver in the toolbox.

How to clean wires from PC?from wikihow.com

Even after you hide most of the wires in a tray or box, you'll still have wires hanging from the PC to the storage system. To clean them up, pinch the hanging wires together and wrap them with a plastic zip tie or rubber tie.

How to make a zip tie look more polished?from wikihow.com

For something more decorative than a zip tie, take a strip of braided sleeving or a piece of split tubing. Gather the wires and place them in the center of the sleeving or tubing. Then, wrap the material around the wires to hide them and give your wires a more polished look.

How to conceal wire around door?

To conceal wire around a door, DIY your own wire clamps using a clear plastic soda bottle. To do this, simply cut the bottle into 1-1/2 x 1-in. strips, then loosen the trim with a small pry bar, wrap the plastic around the wire, and slide it between the wall and trim. New to projects involving electricity?

What is ghost wire?

Sewell Direct offers “Ghost Wire” that’s a spool of 16 AWG speaker wire, about the width and thickness of duct tape. It has a strong adhesive on one side, so it can be easily run along walls, floors and under carpets. This invisible wire solution is a non-invasive and low-cost alternative to cutting holes in the wall. Check out Sewell Direct’s guide, which covers ghost wire, super flat adhesive speaker wire and a ghost wire terminal block.

Can you hide a TV in the wall?

If you’re mounting your TV to the wall and don’t want to install the wires inside the wall, you can hide the clutter with a shower curtain rod cover. You’ll want to lightly sand the cover, then paint it the same color as your wall. Fresh Crush has the DIY how-to steps.

Can you tuck speaker wire in carpet?

Before you invest in any products, if there’s room you can tuck speaker wire between the carpet and the baseboard in a room with wall-to-wall carpet. To do this, you can simply use a ruler or paint stir stick to force the wire out of sight.

Who is Alexa Erickson?

Alexa Erickson. Alexa is an experienced lifestyle and news writer , currently working with Reader's Digest, Shape Magazine and various other publications. She loves writing about her travels, health, wellness, home decor, food and drink, fashion, beauty and scientific news.

What to do with cable wires piling up?

Cable Boxes. If you have excessive wires piling up and creating an eyesore, consider purchasing a cable box to house the slack. You can buy a simple plastic and waterproof box or drill a box or cable wire housing receptacle into the side of your home. This box can also match the color of your house to be better hidden.

What is a cable wire ground protector?

If you do not care so much about your cable wires’ aesthetics and simply want to protect them from being run over or torn, purchase a floor cable raceway. These are made of plastic and come in various shapes and lengths. Some raceways are thinner and snake along the length of the cord.

How to reduce cable wire visibility?

The simplest way to reduce cable wire visibility is to think ahead about where you will be placing your wires. Here is an easy table to follow: When blending your cables in with the surrounding area, the one thing to consider is whether you will be doing any yard work in the interim period.

How to hide cable wires?

You can hide your cables along outdoor walls or baseboards by matching them or their covers to the wall color or simply run them behind the walls themselves.

Why is steel used in conduit?

Steel is used for shallower depths to prevent the conduit and wire from melting in the event of a fire or explosion, as the damage from each can reach below ground.

Why paint cables?

In fact, painting your cables will not only help them to blend in but also helps to prevent UV ray damage.

Can you tuck wires under a roof?

With roof overhangs, you can tuck the cable wires underneath, stapling them into the side of the house, though it is highly recommended that you still use a cable tube or wire guard for added protection. Hiding your cable wires under the lip of a house’s side panel will be much the same. Popular Stories Right now.

What is crown molding?from neatceiling.com

Crown Molding. Most homes use crown moldings to cover the intersections of ceilings and walls. The crown molding usually adds decorative flair, but it also serves the purpose of hiding ugly gaps between ceilings and walls. However, you can also use crown moldings to hide electrical wires. By placing these wires along the ceiling edges behind ...

How do cord concealers work?from neatceiling.com

You basically stick them on to the ceiling, run the electrical wires through them, and then slide the cover on top to conceal the wires. You can use these simple additions along the parameter of your ceiling.

What is a drop ceiling?from neatceiling.com

Drop ceilings, or suspended ceilings, hang slightly lower than the original one and are great for covering up unsightly features like sprinkler system heads or ceiling wires. These ceilings are more popular in office buildings, but some homes incorporate them too.

How big can a verticle hole be for a ceiling fan?from finehomebuilding.com

Boise Cascade addresses this topic by stating in the Glulam Specifiers Guide (page 28?) that if a single verticle hole is used for electrial wiring to ceiling fans or lights it can be no larger than 1/2" and the Glulam has to be upgraded to the next larger size.

What is wiremolding?from finehomebuilding.com

Wiremold is a product specifically made for this use. Rectangular sections, with the appropriiate fittings, that cover the wires. It's made in various sizes, and can be plastic. It can be painted.

Can you put wires on the ceiling behind crown molding?from neatceiling.com

By placing these wires along the ceiling edges behind the crown molding, you can have a sleek, minimalistic look without the eyesore of wires and cables. If you already have crown molding installed, you will have to remove it, run the wiring across the intersection, and then reinstall the crown molding. If you are looking to install crown molding ...

Can you hide electrical wires on the ceiling?from neatceiling.com

Having exposed electrical wires on a ceiling can be distracting and unattractive. Luckily, there are some clever ways to hide electrical wires on your ceiling. So, if you’re looking to hide exposed wiring from light fixtures, speakers, or a television, then this is for you!

How to mount wires to wall?

Before mounting the wires, draw an outline on the wall with a pencil that can be erased easily. Measure the length of the cords (you can easily do that with a string) and plan the artwork accordingly. You can mount the wires to the wall with wall clips or mounting tape.

How to hide TV cords without cutting the wall?

1. Make a Wood Frame and Cover It in Fabric. It’s a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.

Why do I hide TV wires in my living room?

The main reason I decided to organize and hide TV wires in my living room was that I simply didn’t like the way they looked. They were ugly.

What happens if you don't have a TV stand?

If you don’t have your TV mounted on the wall and you use a standard TV stand, chances are great that there’s a jungle of wires behind the stand. To organize and hide the cluttered cords, first, you have to shorten each of them individually to the length you need.

What are the disadvantages of using a cable trim?

Its major disadvantage is that the cables are not so easy to access under the trim work if you need to remove or add one in the future. That’s why I only recommend this method if you’re willing to spend some time disassembling the trim work each time you add or remove a new device to your TV set (or if you don’t want to change your set anytime soon).

What paint should I use on plastic raceways?

Acrylic, model or enamel paint works great for plastic surfaces. Before painting, don’t forget to clean the raceway with warm water and dish soap to remove any grease or dirt. This is the raceway I recommend because it is paintable and very easy to install due to the self-adhesive backing. 3.

How to cover cords on TV?

Place some home decoration items, picture frames, plants or books under the TV and position them so that they cover the cords. Make sure you don’t just put the items randomly below the TV. They should look natural and blend in the environment. That’s all.