Move the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle. Locate the flat, brass-colored screw on the back of the water dispenser. Turn the screw slightly clockwise for colder water or counterclockwise for warmer water. Wait one hour for the water temperature to stabilize.
Do Primo Water dispensers come hot or cold?
They can provide hot or cold water, depending on the model. Adjusting the temperature of the cold water from a Primo dispenser is easy, and doesn't require any tools. Move the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle.
How do you adjust the water dispenser on a Primo refrigerator?
Move the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle. Locate the flat, brass-colored screw on the back of the water dispenser. Turn the screw slightly clockwise for colder water or counterclockwise for warmer water.
What to do if water is leaking from my Primo dispenser?
Plug back your Primo and enjoy it. If you still notice that water is leaking from your dispenser, there might be some cracks in the internal portion of the dispenser. You can contact the primo team or other professionals for help. Bottom loading dispenser may sometimes face pump issues.
How do I Make my water cooler colder?
If you notice that your water cooler does not dispense ice-cold water, there are steps you can take to make your water cooler colder. Keep the cold power button on at all times. This will ensure an unremitting supply of colder water.
Can you make a primo water dispenser colder?
While the machine is turned off and unplugged, dispense about 4 cups of water from the cold dispenser. Then, plug the machine back on and turn on only the green switch. Allow one hour for the unit to cool the water before checking the temperature.
Why is my Primo water dispenser not cold?
Unplug the unit. After a few minutes, plug the unit back in, turn the switches back on and give it one hour and recheck the water temperature. If this does not correct the issue, please call our Customer Service Center.
How do I lower the temperature on my water cooler?
0:261:48Adjust Cooler Temperature - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou would do the opposite counterclockwise about a quarter of a turn again. It does not take veryMoreYou would do the opposite counterclockwise about a quarter of a turn again. It does not take very much turning to make a difference in the water temperature.
Why is my water cooler not cold?
Make sure that your water cooler is plugged on by the mains socket and that the plug is pushed into the wall. (It may sound terribly simple but it is often the problem!) Double check that the switches on the back of the cooler are on. You can tell if it is by looking at the light by the switch.
What are the 3 switches on back of Primo water dispenser?
CONVENIENCE SWITCHES – On/off switches for heating, cooling, nightlight and self-sanitization are located on the back of the dispenser. SELF-SANITIZATION LIGHT – Flashes green when sanitizing. COOLING LIGHT – Flashes blue when water is cooling. Light turns off when water is fully chilled.
How long does it take Primo water dispenser to get cold?
Cold water is not cold. It takes up to one hour after setup to dispense cold water. Make sure the power cord is properly connected to a working outlet. dispenser. Make sure green power switch on back of dispenser is ON.
What is the red button on the back of my Primo water dispenser?
Red full indicator in tray rises when tray is full indicating it's time to empty. Water Bottle – Not included. Uses 3, 4 or 5 gallon bottles. Visit www.PrimoWater.com to find Primo Water at a store near you.
What temperature should cooling water be?
Maximum Entering Water Temperature As previously stated, typical HVAC conditions call for an entering water temperature of approximately 95ºF (35.0ºC). All BAC Cooling Towers are capable of withstanding temperatures of at least 120ºF (48.9ºC) with standard fill materials.
How do you set the temperature on a Primo water dispenser?
How to Set the Temperature on a Primo Water DispenserMove the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle.Locate the flat, brass-colored screw on the back of the water dispenser.Turn the screw slightly clockwise for colder water or counterclockwise for warmer water.More items...
How long does it take for water to get cold in a water cooler?
Dispensers may need approximately 2 to 3 hours to chill the water. Therefore, please drain the water until cool water comes out from the water tank again. Discard the first glass of water and dispense enough water (at least 6 glasses) until the fresh and chilled water comes out.
Why is my cold water dispenser not working?
Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.
How do you fix a Primo water dispenser?
2:153:25Bottom Load Flow Issue - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst remove the two screws that hold the cover in. Place. Now lift the rear of the cover up andMoreFirst remove the two screws that hold the cover in. Place. Now lift the rear of the cover up and pull it toward you until it is out of the way.
How long do Primo Water Coolers last?
Primo water dispensers should last as long as the bottles are kept and serviced properly. However, the average lifespan of the primo water dispenser is not more than 6-12 months.
What is the red button on the back of my Primo water dispenser?
Red full indicator in tray rises when tray is full indicating it's time to empty. Water Bottle – Not included. Uses 3, 4 or 5 gallon bottles. Visit www.PrimoWater.com to find Primo Water at a store near you.
How to make water cooler colder?
If you notice that your water cooler does not dispense ice-cold water, there are steps you can take to make your water cooler colder. Keep the cold power button on at all times. This will ensure an unremitting supply of colder water.
How to keep water cooler warm?
The water cooler tends to serve warmer water if kept very close to the wall. Place the cooler in a well-ventilated spot. Avoid keeping your water cooler near a stove or exposed to sunshine near a window to protect it from high temperatures.
What is a water cooler?
A water cooler is an appliance that dispenses water for drinking and kitchen use after cooling it. The principal advantages of a water cooler include multiple servings of water with a fresh taste. The bottleless variety of water coolers are connected to the main drinking water supply, whereas the freestanding bottled water coolers have steel ...
Why is my water cooler not cold?
Your water cooler may not provide very cold water if it has an insufficient supply of refrigerant. Clean the condenser wire, on the back of the cooler, every three months. Use a vacuum cleaner for this purpose. A dusty and dirty condenser wire may be the culprit.
What is Primo water bottle?
Primo ® Water bottles are designed to a standard specification and should fit most water dispensers.
How long does it take to clean a Primo dispenser?
Primo recommends that you use the instructions below to dissolve mineral deposits, sanitize, and deodorize your dispenser every 3-4 months. Time Required: 30 minutes Need: (2) tablespoon regular bleach or (2) cups of distilled white vinegar, (1) Empty 5-gallon bottle, (1) 2-gallon bucket and a Phillips head screwdriver.
How long can you leave water in a water dispenser?
Any time you intend to leave your dispenser for more than a week, the reservoir should have all water removed. Unplug the dispenser, open the drain plug on the back and remove water from the hot reservoir. Empty the cold reservoir by dispensing water from the cold tap at the front of the dispenser.
How to remove water from reservoir?
Remove remaining water from reservoirs by dispensing from the hot and cold taps into a pitcher or bucket.
Does Primo Water have a deposit program?
Primo does not have a deposit program in the United States. When you make the initial purchase of a 3 or 5-gallon pre-filled bottle from Primo, you are purchasing the bottle also. We offer an exchange program in which you can place your empty 3 or 5-gallon bottle into our recycling center at your local store and you will receive an exchange ticket that allows you to purchase your next pre-filled bottle at a reduced price. We will accept any 3 or 5-gallon bottle as an exchange. If you are no longer interested in using Primo Water Exchange, we offer an empty bottle credit program. Visit www.primowater.com/empty-bottle-credit for additional information.
Does Primo water expire?
According to the US FDA, bottled water has no expiration date. Primo ® Water can be stored indefinitely as long as the bottles are kept in a cool location and out of direct sunlight.
Why is my Primo water dispenser leaking?
Primo dispensers are made of high-quality materials that usually never trouble you. If your dispenser is leaking, it is probably due to a leaking water bottle. If you have checked the water bottle for any leaks and the dispenser is still leaking water, it can be due to mineral build-up inside taps.
How long does it take for a water heater to turn on after reclogging?
As s second option, check that the light of hot/cold water is turned on after reclogging, if it is not turned on, dispense a couple of glasses and wait for 5-10 minutes for the LED indicator to turn on.
What to do if bottom loading dispenser is not working?
If this happens, unplug your dispenser, remove the bottle and check all the connections, make sure that the suction pipe is installed correctly and there is no air entering in the system .
Why isn't my water coming out of the dispenser?
If you are facing the problem of water not coming out from both the taps on your dispenser, it may be because of a faulty seal on a water bottle or an air-lock.
What is the best water dispenser?
Primo Water Dispensers are one of the best water dispensers available on the market currently. They are durable, economical and best suited for all your needs for home and office use. Primo water dispensers , if cleaned and maintained properly, do not have any issues in their working. However, over time some problems can disturb them.
How long does it take for a water dispenser to reset?
You can also reset your dispenser by removing a couple of liters of water from it and giving it 24 hours to settle down. Plug-in the dispenser and turn on the buttons, wait for 3-4 hours and then try again.
How to clean mineral build up on taps?
If there is any mineral build-up on the taps, you can use the old toothbrush to clean it off. For better results, dip the toothbrush in the mixture you have just prepared. Wash the taps with clean water after doing it. Now flush both the taps completely and waste the water.
How to get air out of a cooler?
1. With the lid removed, drill a series of half-inch holes around the top rim of the cooler, placing them them about 4 or 5 inches apart. The spacing isn't critical, but aim for neatness. These holes are used to inject the foam and allow trapped air to escape.
How long does it take for foam to cure in a cooler?
You'll need a lot less foam than you did for the walls of the cooler. 3. After leaving the foam to fully cure overnight (sometimes up to 24 hours), use a sharp knife to trim flush any excess that has squeezed out of the holes. 4. Screw the lid back on the cooler. Add ice and drinks and enjoy!
How to tell if a cooler has air?
To check if your cooler has only an air space between the inner and outer skins, open the lid and try to squeeze the inner and outer sides between your thumb and forefinger. Another way to tell is to tap the outer case with a knuckle. It will sound hollow if there's nothing in there apart from air.
Do coolers stay cold longer?
On further investigation, it turned out that many cheap coolers are just an inner and outer skin of plastic with an air space between them. If this space can be filled with some sort of insulation, rather than just relying on dead air, the contents of the cooler will stay cold far longer.
Is insulation good for coolers?
By and large, the more insulation that a cooler has, the better it will perform. The insulation serves two masters: It keeps the heat out and keeps the cold in. I therefore figured that given the right materials, it should be more than possible to upgrade the basic cooler I already owned.