- Turn the pool filter system off.
- Attach your pool hose to the backwash port on your sand filter.
- Select the “Backwash” position on your multiport valve handle.
- Turn the pool filter system on and allow it to rush out of the backwash port and through the backwash hose for two minutes or so until the water ...
- Turn the filter off again and set your multiport filter valve to the “Rinse” position.
- Turn the pool filter system back on and allow it to run for a minute or so.
- Turn the pool pump off and switch the multiport valve to its original setting (usually the “Filter” position).
How do you vacuum the pool with a cartridge filter?
When you want to vacuum to waste with a cartridge filter, follow this step:
- Switch off the pump Locate the back of your filter and unscrew the drain plug
- Switch on your pool pump and let the water run until it gets to your desire level that you want to vacuum the water out of the pool
- Shut off the pump and screw the plug back into the drain plug
How to clean a best way pool filter?
How to Clean a Cartridge Type Swimming Pool Filter
- Method 1 of 4: Taking the Filter Out of the Filtration System. Remove the filter when the pressure is 7-10 lbs above normal. ...
- Method 2 of 4: Removing Large Debris with Water. Spray any debris from the filter with a garden hose. ...
- Method 3 of 4: Cleaning the Filter with Cleaning Solution. Purchase filter cleaning chemicals to get rid of oils on the filter. ...
Can you drain pool with backwash feature?
You can also drain or backwash your pool into your home's sanitary sewer cleanout. If backwashing into the sewer cleanout, do not allow the passage of soil, sediment, rock, sand, debris or other solid material during the discharge. This could potentially create a sanitary sewer overflow in the street and/or on your property.
How do you vacuum the pool with a sand filter?
- The first thing to do is turn your heater off if it is still on- It should not cycle. ...
- Shut your vacuum pump off and clean the skimmer and pump basket.
- Later place back the pump basket to its correct place.
- Backwash the vacuum filter; you do this by making sure you turn on the filter top handle until the filter gets to the backwash. ...
How Do I Backwash My Pool Filter with a Push-Pull Valve?
Why Do I Need to Backwash My Pool Filter?
How to backwash a multiport valve?
How much pressure should I backwash my filter?
How to backwash a D.E. filter?
Can a pool filter suck anything?
Does backwashing a filter make it less efficient?
See 2 more
What is the proper way to backwash a pool filter?
4:206:43How To BACKWASH A POOL FILTER (The Right Way) | Swim UniversityYouTubeStart of suggested clipEnd of suggested clipThree turn the filter. System back on and let it run for one to two minutes water should be flowingMoreThree turn the filter. System back on and let it run for one to two minutes water should be flowing out the backwash hose. Four turn the filter. System. Off then return the multi-port valve to rinse.
How do you clean the filter in Bestway pool?
0:447:41How To Clean Pool Filter - Flushing Filter Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd open up the skimmer basket clean out the filter I'm going to show you how to do it here with theMoreAnd open up the skimmer basket clean out the filter I'm going to show you how to do it here with the Intex filter that basically comes with this pool.
How do I backwash my above ground pool filter?
1:524:26How to Backwash Your Above-Ground Swimming PoolYouTubeStart of suggested clipEnd of suggested clipYou do need the pump to be turned off so we're gonna go ahead and turn our pump off here. And you'reMoreYou do need the pump to be turned off so we're gonna go ahead and turn our pump off here. And you're gonna come over to this valve that should be set on filter.
How do you backwash a pool step by step?
0:322:11How to backwash your pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn your filter valve to backwash. Then turn on your pool. Pump. Watch the water coming out untilMoreTurn your filter valve to backwash. Then turn on your pool. Pump. Watch the water coming out until it runs clear usually in two to three minutes once the water is clear shut off the pump.
How often should you change Bestway pool filter?
Bestway® recommends replacing them every two weeks during periods of prolonged use for best results.
How long do you run a Bestway pool filter?
Frequently Asked QuestionsHow often should I change the filter? Filters should be replaced every two weeks.How long can I leave the pump running for? Up to 10 hours a day.Can I plug this into an extension lead? No, the filter pump should be plugged directly into a mains socket.
How often should you backwash your above ground pool?
about once a weekAs a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.
How long should you backwash an above ground pool?
2-3 minutesTurn on the pump and allow the sand filter to backwash for 2-3 minutes or until the water in the sight glass (typically located on the top of the filter) is visibly clear. How long you backwash the sand filter for is not critical though you should visibly see clear water within 2-3 minutes.
How long do you rinse after backwashing a pool?
Rinse the filter for about 1 to 2 minutes or until the water in the sight glass is clear. NOTE: Any electric heater must be off.
Should you backwash or rinse first?
You should always perform a rinse after a backwash before going back to the regular filtration setting. If you don't, any remaining junk released from the sand that is still in the tank gets pumped directly into your pool. The rinse flushes it out first.
What happens if you don't backwash your pool?
Having said that, what will actually happen if you simply don't backwash your pool? Increased water pressure strains the pump, eventually damaging it. Water can't travel freely through the sand, so your system will experience reduced flow, rendering your pool cleaner useless.
What's the difference between rinse and backwash?
Rinse runs water in the same direction that normal filtering does. Backwash runs it through the sand in the opposite direction. Rinse is to clear any dirt out of the clean side of the sand before you start sending it back to the pool.
How do I clean the filter on my above ground pool pump?
0:585:04How To Clean Filters And SAVE MONEY Intex EasySet PoolYouTubeStart of suggested clipEnd of suggested clipAnd go through each one this takes about five minutes to clean all of them out and I get all theMoreAnd go through each one this takes about five minutes to clean all of them out and I get all the dirt out of each little groove and as you can see it cleans it up pretty good.
Can you clean and reuse a pool filter?
0:251:26Intex Pool Filter - Clean and REUSE! - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut one thing you can do is. Use your hose to clean this filter out it's actually you don't have toMoreBut one thing you can do is. Use your hose to clean this filter out it's actually you don't have to throw these things away every single time these are the paper filters.
How often should I clean pool filter?
A pool needs a clean filter and it needs to be cleaned periodically-usually once a month in swim season and perhaps less frequently in the offseason. If your pool's filter is oversized by design, these filters need cleaning 3-4 times per year by a pool professional.
Can you use vinegar to clean pool filter?
The acidity in vinegar does a great job in removing any calcium or mineral buildup in the filters. So vinegar is a great DIY solution to use when deep cleaning your pool filters.
Why is it important to backwash a pool filter?
Backwashing a pool filter is an important process to keep your water clean and clear. Follow the steps in this article, be sure to dispose of the backwash properly, and you should have no problem maintaining a sparkling swimming experience for everyone!
Why do you need to backwash a pool?
You need to backwash your pool to clear out and dislodge the filtration system from trapped contamination. Next, the clogged filter valve will flush the waste out using a connected pump or backwash valves. Finally, when the cleaning process is complete, the water is clear and has an easy flow.
What Does Backwashing a Pool Mean?
The process of backwashing will reverse the flow of water and flush out any contamination from your swimming pool. It uses a normal operating filter pressure to clean your filtration system by flushing out the debris.
Why do you need to send water backwards?
Therefore, you need to send the water backward to clean and drain the filter. It will force all the debris caught in the release valve to wash out through the backwash port. Hence this process de filters the contamination and brings back the normal functioning level of the filter.
What happens if you don't backwash your pool?
If you do not backwash your pool, the filter will get damaged. Moreover, there will be a continuous rise of debris that will eventually turn the water murky. Some filter pumps may explode with all the accumulated waste lines. Without backwashing, the efficiency of your pool will decrease!
How to keep sand filter on for a water pump?
Turning the handle of the sand filter to the option, keep it on for a few minutes until the water clears from the pump. Further, please turn it off and roll up the hose. Lock the handle in place of your sand filtration to ensure water flow.
Why does my water filter need to be backwashed?
It becomes clogged and reduces the effectiveness of water filtration. The filter medium will require backwashing to ensure functionality. Therefore, you need to send the water backward to clean and drain the filter.
How to keep water from entering pool filter?
First up, turn off your pool pump. This will keep water from entering the filter tank while you’re performing maintenance on it.
How often should I clean my pool filter?
Cleaning your cartridge filter should be done once every 2 to 6 weeks. This depends on how much use the pool gets and how much debris the filter is exposed to. The filter tank’s pressure gauge should be monitored so that you know when to clean the cartridge. When it rises 8 to 10 PSI over it’s starting point, you’ll know it’s time to clean ...
What is a water purifier?
One such water purifier is a cartridge filter, which absorbs impurities the sanitizer has destroyed. Having a clean cartridge filter saves you from swimming in a dirty, cloudy pool. Let’s talk about how you can keep it clean for the duration of its life.
How to clean a filter in the morning?
Deep cleaning requires you to soak the filter in a diluted solution of cartridge cleaner. Do this overnight, and rinse it off in the morning.
How to keep cartridge filter working?
The only way to keep it working effectively is to clean it out. The upside of cartridge filters is that their cylindrical, pleated design also makes them easy to clean, but the downside is you’ll need to remove them from the filter tank and hose them down.
What is the purpose of a pool sanitizer?
As your pool’s sanitizer (be it chlorine, bromine, or salt) kills off bacteria, viruses, and general debris in the water, the pool system cycles the water through the cartridge filter. This is where the debris ultimately ends up, keeping the pool water clean.
What happens if you push debris through a pool?
If you push debris through it, it will end up back in your pool once you return the cartridge to the tank and run the system.
How to get water back into a pool after filtering?
Hold the pole and extend it so it is long enough to reach the bottom. Push the vacuum head down slowly into the pool until it reaches the bottom. Start at the edge of the pool near a return jet, which is the jet that pushes water back into your pool after it gets filtered, so you can easily reach it with the hose.
Where is the on/off switch on a pool filter?
Locate the on/off switch on your pool’s filter, usually near the pressure gauge, and switch it off. Always do this to turn off the filter before you move the multiport valve to backwash the filter or you could break the diverter gasket inside the valve.
How to save water in pool?
Use the filter setting, or you can vacuum to waste, which means the water is discharged out instead of returning to the pool. Using the filter setting will save water, but you have to backwash the filter when you are done. Vacuum to waste when you have a lot of debris in the pool that you don't want going into your filter.
How to get water out of a pool with a skimmer?
Place the open end of the hose into the open suction hole in the skimmer. Hold your hand over the open end of the hose and aim it upwards to keep all the water in it as you lift it out of the pool. Lower it into the water where the skimmer basket was, keeping your hand against the opening until it is under the water, and place the opening of the hose in the suction hole.
What does the rinse function do on a filter?
The rinse function will flush out any remaining dirt and debris from the filter before you turn it back on.
How to get bubbles out of a pool?
Place the open end of the hose against the return jet so it covers the jet stream. Watch the bubbles coming up from the vacuum head at the bottom of the pool and remove the hose from the jet when bubbles stop rising from the vacuum head.
How long should a hose be for a pool?
Make sure the hose is long enough that you will be able to walk around the perimeter of your pool and cover all the surface area of the bottom of the pool.
How long does it take to backwash a pool filter?
Backwashing your pool filter is easy and should take less than an hour. This process will clean the inside of your filter, and backwashing your filter regularly means there is no need to clean the filter manually.
What is the purpose of backwashing a pool filter?
The purpose of a pool filter is to trap debris and prevent them from re-entering your pool. When you backwash your filter, you flush those contaminants out and improve the efficiency and lifespan of your filter.
How does a pool sand filter work?
Water flows into the tank of a pool sand filter and is then pushed down through the sand. As the water moves through the sand, the filter purifies it before releasing it back into the pool. Sand filters excel at catching large dirt and debris, but may not capture all of the smaller particles that pass through the filter.
How much pressure should a pool filter have?
Most pool filters should be around ten-pound force per square inch (psi) and can operate between five and fifteen psi or between ten and twenty psi, depending on the system .
Why is my pool water cloudy?
If your pool is looking cloudy, it could be because of a backed-up filter. Backwashing your filter can help keep your pool water crystal clear. While cloudy water may also be attributed to chemical imbalances, backwashing your filter is a quick and less costly way to try to clear your water up.
Why does my pool filter slow down the flow of water?
Water Flow. Too much dirt and debris will slow the flow of water passing through your filter, which will slow the flow of water entering back into your pool. You can feel the difference in circulation from the water jets that push the water back into your pool.
Can you use pool sand for filtering?
It is essential to always use pool-grade sand if you choose to run a sand filter: Silica is naturally mined quartz that is ground into fine sand that can easily trap particles in your pool water. It is inexpensive to purchase, which makes it the most popular option for pool filter sand today.
How long does it take to backwash a pool filter?
Backwash, or backwashing, is a method to thoroughly clean a swimming pool 's filter and avoid having to clean it manually. It usually takes just a few minutes. You'll know it's time to perform the backwashing routine when the pressure gauge indicates a pressure rise of 8 to 10 pounds above the clean or "startup" pressure.
How to backwash a sand filter?
Sand filters, however, can be backwashed once a month and are typically torn down two times per year. To backwash a sand filter: 1 Shut off the system 2 Clamp the backwash hose to the water outlet 3 Position the backwash valve to either push or pull—the water will flow through the hose or the equipment 4 Turn the handle to the backwashing position 5 Backwash for a few minutes or until the water clears 6 Turn off the system to stop the backwashing process 7 Roll up the hose 8 Move the valve handle to its previous position, which will permit water to flow through the system. Lock it in place 9 While turning on the system, open the air relief valve, which is located at the top of the filter. Leave it open until water flows through 10 Close the valve and shut off the system
How to backwash a water hose?
Clamp the backwash hose to the water outlet. Position the backwash valve to either push or pull—the water will flow through the hose or the equipment. Turn the handle to the backwashing position. Backwash for a few minutes or until the water clears. Turn off the system to stop the backwashing process.
What to do if backwash valve is leaking?
Backwash valves that have bad gaskets or O-rings. Maintenance and prevention are key: When you feel a backwash valve becoming difficult to turn, do a teardown and lubricate before any leaks occur. While you're at it, carefully examine grids, laterals, cartridges, and manifolds each time you break down a filter ...
How to stop backwashing?
Turn off the system to stop the backwashing process. Roll up the hose. Move the valve handle to its previous position, which will permit water to flow through the system. Lock it in place. While turning on the system, open the air relief valve, which is located at the top of the filter.
What is backwashing in a pool?
The backwashing process reverses the flow of water to flush out contaminants from a swimming pool filter. It should be carried out until water runs clear through the waste line.
Where is the air relief valve on a water filter?
While turning on the system, open the air relief valve, which is located at the top of the filter. Leave it open until water flows through
How Do I Backwash My Pool Filter with a Push-Pull Valve?
So you’ve got a push-pull valve, huh? It’ll be even simpler for you. Just follow the below steps to get backwashing:
Why Do I Need to Backwash My Pool Filter?
Cartridge users, you’re on the wrong page—though you still have to routinely clean your filter. Backwashing only works filters of sand and diatomaceous earth (from now on, I’ll call this D.E.), which collect contaminants with the help of sharp edges. But once those contaminants build, your filter becomes increasingly less efficient—even if those edges haven’t yet smoothed down—and the pressure of your filter ramps up.
How to backwash a multiport valve?
And while you’re at it, make sure the filter is never on while you’re turning that multiport valve: 1. First, turn off the filter system. You don’t want anything running yet. 2. Then, connect the backwash hose to the filter’s waste port. This will be where the backwash really happens in a second. 3.
How much pressure should I backwash my filter?
Generally, you want to backwash your filter once it’s 10 psi over your normal operating pressure.
How to backwash a D.E. filter?
When you backwash your D.E. filter, you’ll need to replace the powder, which is much more effective to do through the pool’s skimmer. To do this, you want to mix the manufacturer’s recommended amount of D.E. with water to form a wet sludge, and then pour the solution directly into the skimmer. Make sure the pump is running properly so it circulates through your system. It’ll take some time for the mixture to properly disperse across the filter, so you’ll want to wait at least eight hours until you swim again. It’s okay—distance makes the heart grow fonder.
Can a pool filter suck anything?
For all the noble work it does, a pool filter’s sort of like a household vacuum: as it picks up dirt and debris, it holds everything inside, and eventually, it can’t suck anything else in—unless you switch out the bag.
Does backwashing a filter make it less efficient?
But once those contaminants build, your filter becomes increasingly less efficient—even if those edges haven’t yet smoothed down—and the pressure of your filter ramps up. Backwashing cleans out your filter without requiring you to pick through sand, which would be messy, and D.E., which would be dangerous.
