How to calculate the amount of turf you’ll need.
- If you’re lucky enough to have a fairly rectangular or square space simply measure the length and width. (13’x10′)
- Multiply those two measurements to get your total square footage. (13’x10’=130sqft)
- Divide your total square footage by 15. (130sqft/15=8.66)
- Round up to the nearest whole number. That will give you the total...
How do I calculate how many rolls of turf I Need?
Use our simple turf calculator to work out how many rolls of turf you need to turf your lawn. Simply measure the length and width of the area you need to turf (in either meters, feet or yards) and enter the measurement in our turf calculator below. Unit Type: A = B = Calculate. Total = Sq Meters (rolls of turf)
How do I measure the area for turf?
Simply measure the length and width of the area you need to turf (in either meters, feet or yards) and enter the measurement in our turf calculator below.
How much turf do I need for my lawn?
Square and rectangular lawns are the easiest type measure. Simply multiply the length of your lawn by the width. For example, if your lawn is 10 meters long and 5 meters wide, the equation will look like this: That’s 50 square meters. As rolls of turf come in square meters, you’d need 50 rolls.
How do I calculate the square footage of my sod?
Plug those numbers into the handy-dandy sod area calculator above. Or multiple the length by the width to obtain the square footage. If the space you are looking to sod is circular measure the diameter, the longest possible section, of the circle in feet.
How do I figure out how much turf I need?
Measure the length (L) and width (W) of the square or rectangular area. To calculate the amount of turf you need in square metres, multiply the length by the width. For example: Length is 10m and width is 5m, so 10m x 5m = 50sqm.
How do you figure square footage of turf?
Walk the length of your lawn, figuring that one pace equals about 3 feet. Do the same with the width of the lawn. Then multiply the length by the width to arrive at the total. Make sure you subtract the square footage of your home and driveway when calculating the total square footage of your lawn.
How many m2 are in a roll of turf?
Each turf roll is equivalent to about 1m2, measuring 1.72 metres long and 0.58cm wide. The depth, depending on the grass species chosen, ranges from 0.25mm to 0.30mm.
How much does a roll of turf cover?
1m²1 roll of turf is equal to 1m².
How many rolls of sod do I need for 500 square feet?
1 piece of sod is 16" x 24", which equals 2.75 square feet. A 500 square feet pallet contains approximately 180 pieces of green sod. To calculate how many pieces of sod you need, measure the total area (length x width) and divide by 2.75.
What does 1000 sq feet look like?
A home or apartment that is 1,000 sq. feet will have a square area that generally measures 100 feet long by 100 feet wide. 1,000 square feet is about the size of two full-sized two-car garages.
How many rolls of turf can you lay in a day?
With all the soil preparation already done, and with everything in place, a single contractor can lay around 100m2 turf per day.
What is the average size of a roll of turf?
What size is the average turf? The average turf is roughly 1.3ft or 0.41m wide and 8.16ft or 2.49m long.
Can you lay turf on top of grass?
It is possible to lay new turf on top of old grass; however, you're not going to achieve the best possible result. Therefore, we highly recommend you never lay fresh turf on top of old turf; otherwise, your lawn's condition will deteriorate over time as the old grass dies.
What month should you lay turf?
Turf can be laid any time of year except on to frozen ground, however ideal times to lay turf are in early-mid autumn and early spring, when the ground is relatively warm – which will promote new root growth – and increased rainfall may reduce the need for manual watering.
What should you put down before laying turf?
Spread a general-purpose fertiliser over the ground one week before laying the turf. ... Firm the soil surface by walking up and down on it taking small, heavy steps. ... Lay the turves on the soil, staggering the joints like brickwork and overlapping them slightly.More items...•
What do you put under turf before laying?
Generally, in places with a mild climate, you can use the following: type 1 stone, gravel, crushed rock, decomposed granite, or any stones or rocks smaller than 3/8 inches as a base. Around 3-4 inches of the base material is needed to improve drainage and avoid slumping.
How do I measure my yard for artificial turf?
Take measurements along the longest and widest points of the area. You should aim to measure your lawn as if it's a square/rectangle. ... Multiply the width by the length. Doing this will give you the square meterage of the area. ... Check the estimated area's price.
How do you figure sq footage?
Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240).
How do you calculate the area of an irregular lawn?
Irregular Shapes Formula: Measure the length of the longest axis across the area. Every 10 feet along the length, measure the width of the area at right angles to the length line. Total all widths and multiply by 10. Example: A= (40' + 30' + 50') x 10 = 1,200 sq.
How big is a roll of turf?
The size of each roll of our garden turf is 1 square metre.
What lawns require a different formula?
An oval shaped lawn will require a different formula.
What if my lawn is circular?
These lawns are two different shapes and will require a different mathematical equation and process to figure out.
What if the lawn is in the shape of a triangle, or there are triangular areas?
If you need to know how much turf for a triangular shaped lawn, you will need to measure the height of the triangle and the width of the base.
How to find the radius of a lawn?
To work out the radius, simply measure the full width of the circle and then divide it by 2. You will now multiply the radius by itself.
What is the radius of a 10 m circle?
Therefore, if the circle was going to be 10 metres wide, the radius would be 5 metres and you would then multiply that by itself. 5 x 5 = 25 metres.
How big is a lawn?
Most lawns will not give you a perfect round number to work with, it is very likely that your lawn could be something like 9.4 metres by 7.3 metres.
How many m2 is a roll of turf?
1 roll of turf is equal to 1m².
How to choose a garden shape?
Choose the garden shape, either square or circle. If selecting a square garden enter the length and width, if selecting a circular garden enter the diameter. Once you have entered the dimensions you will see the area, in m², and the number of turf rolls you require.
What is the best way to measure an irregularly shaped area?
If you have an irregularly shaped area: measure the space in smaller, rectangular shaped areas
How to find the area of a rectangular space?
To find the area of a rectangular space, measure the length and width of the space to be sodded in feet. Plug those numbers into the handy-dandy sod area calculator above. Or multiple the length by the width to obtain the square footage.
