Digital Levels are a true testament to Empire's commitment to world class accuracy, performance and innovation. To calibrate the level, just set it on a fairly level (less than 5°) surface, and press the "CAL" button. Standard calibration instrument IEC942, Class 2Specifications:Frequency: 1000 Hz ± 2 %.
How do you zero a digital level?
0:101:07How to Calibrate a Keson Digital Level - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing to do is to check. If your level is reading accurately. The way to do that is turnMoreThe first thing to do is to check. If your level is reading accurately. The way to do that is turn your power round vial is reading zero the digital readout is reading something other than zero.
How accurate is a digital level?
Although less accurate than a quality laser level, a quality digital level, which measures slope, has an accuracy of plus or minus 0.1 degrees when measuring horizontal and when a laser beam is attached, the accuracy can be plus or minus 1/4 inch (0.25 inches) per 100 feet; over 4 times more accurate than a spirit ...
How do you use digital level?
How to Use a Digital Electronic LevelPlace the digital electronic level on the surface you want to measure.Wait a moment for the level to settle on a degree reading.Adjust the surface accordingly to bring the degree reading to 0.0 degrees, or level.More items...
What is Digital Torpedo level?
em105. 9 9" Magnetic Digital Torpedo Level is ready to measure accurately when powered on and features auto-calibration, providing clear and precise digital readout immediately. The torpedo level has six measure display modes, enabling precise measurements in a wide range of outputs.
How do you calibrate a level?
How to Calibrate Engineers Levels Clean the bearing surface, and the underside of the level to remove any dirt or dust. ... Note the position of the bubble after it has settled, (settling time can be up to 15 seconds) and then turn the level by 180° and place back onto the surface in the same position as before.More items...
Are Longer levels more accurate?
Two things to keep in mind: the longer the level, the greater the accuracy — and that when working in cramped quarters, an overlong level is useless. So having a nine-inch torpedo level in your kit is probably a good idea. There are smaller one, too, as short as an inch in length.
How do you use digital level surveying?
Press the power button, aim the staff, adjust the focus, and with the press of a button measure height and distance. The level shines a beam evenly over the length of the staff and reads the barcode from the graduated rod, thereby, completely reducing the risk of human error.
How do you calculate the slope of a spirit level?
Take note of where the bubble is inside the spirit tube. If it's centered between the lines on the tube, your object is level. If the bubble is to the right of the lines, your object slopes downward right-to-left. If the bubble is to the left of the lines, your object slopes downward left-to-right.
How do digital spirit levels work?
Depending on the design, the digital spirit level module runs on a single-use or rechargeable battery. The measurement process essentially corresponds to that of an analogue spirit level. The measurement can either be read off from the built-in vial or via the digital display on the electronic module.
How do you read an empire torpedo level?
2:404:03The True Blue Empire LED UltraView Torpedo Level - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto that v-groove there you can make markings. And readings beyond the width of the torpedo. LevelMoreInto that v-groove there you can make markings. And readings beyond the width of the torpedo. Level itself so trade is just to give you a little bit of a wrap up on the old ultra.
How do you read an empire level?
1:294:32Empire USA Basic and Incline Line Levels Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy a single eighth of an inch so that would be 1/8 inch over 12 inches so that's letting you knowMoreBy a single eighth of an inch so that would be 1/8 inch over 12 inches so that's letting you know that this end of the line would be exactly one eighth of an inch higher than the other.
What is a magnetic box level?
Box beam levels or box levels are a type of spirit level and are called such because of the shape of the level frame. If you were to cut the box level in half, you would see the aluminum is formed (extruded) in the shape of a rectangle(or box)and is generally hollow in the middle.
How to calibrate a vial bubble?
To calibrate the vial bubble to the digital read-out as opposed to the factory calibration: 1. Set the level on a stable surface, either vertical or horizontal. Ensure the bubble is centered in the marks. 2. Press the MODE and INSPECT buttons at the same time. CAL will appear on the display. 3. Press and hold the MODE and INSPECT buttons for 1 second to start the calibration sequence. 4. When complete, the audio will sound and the display will return to the measurement. The icon will appear on the display.
How to set a reference angle to zero?
To set "zero" to a defined reference angle: 1.Set the level to the desired angle and press the INSPECTbutton. The Inspection mode indicator will begin flashing and the new angle will be set as "zero". 2. To display the reference angle, press the INSPECTbutton again. The reference angle will appear for 3.To return to true zero, press and hold the INSPECTbutton for 2 seconds.
