How to Replace Your Dryer Drum Glides
- Getting Started 1. Gather Your Materials The first step is to get together all the right materials. ...
- Open the Top 3. Clean the Lint Trap ...
- Remove the Front Panel 7. Unplug the Door Sensor ...
- Replace the Drum Glides 9. Find Your Drum Glides ...
- Reassemble the Dryer 14. Return the Dryer Front Panel ...
- Final Check 18. Test Your Dryer ...
How do you replace a glide bearing on a dryer?
The drum glide bearing ensures that the drum turns smoothly. If the drum glide bearing wears out or is damaged, the drum makes a scraping noise and doesn't turn smoothly. Use a manufacturer-approved dryer part to install a new glide bearing. Replace the felt seal on the dryer front panel at the same time.
Where are the glides on a whirlpool dryer?
In some dryer models, the glides are just inside the door and the drum fits into them when the dryer is put together. In other models, the glides are around the door side of the drum itself. Wherever your dryer model keeps its glides, find them and take a close look at how they are attached and how they are supposed to work.
How do you fix a dryer drum glide?
If your dryer uses felt drum glides, find yours. Remove it by peeling the old worn felt away from its glue and the mounting surface. Use your putty knife to remove stubborn felt and then peel away old glue. Apply several lines of high-heat resistant glue onto the felt mounting surface and carefully place your new felt drum glide.
How do you fix a dryer that makes a scraping noise?
If the drum glide bearing wears out or is damaged, the drum makes a scraping noise and doesn't turn smoothly. Use a manufacturer-approved dryer part to install a new glide bearing. Replace the felt seal on the dryer front panel at the same time. The video below shows a gas dryer, but the repair is the same for electric.
How do you replace a dryer drum glide?
3:538:11Replacing the Dryer Drum Glide (Whirlpool Part #37001298)YouTubeStart of suggested clipEnd of suggested clipWe basically want to push the bulkhead up against the dryer drum. Making sure that the two glidesMoreWe basically want to push the bulkhead up against the dryer drum. Making sure that the two glides are underneath the lip of the drum.
How do you change a drum baffle on a dryer?
0:161:26Whirlpool/Kenmore Electric Dryer Replace Drum Baffle #692490YouTubeStart of suggested clipEnd of suggested clipReach into the drum to support the old baffle as you release it install. The new drum baffle byMoreReach into the drum to support the old baffle as you release it install. The new drum baffle by lining up the holes and securing it with the screws.
Where are dryer glides located?
0:154:17Dryer Front Drum Glide - How it Works & Installation Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe glides may be installed on the drum rim. Itself or they may be attached to the drum. Support onMoreThe glides may be installed on the drum rim. Itself or they may be attached to the drum. Support on the rear of the front panel or bulkhead.
How do you change a GE dryer drum bearing?
1:233:32GE Dryer Drum Bearing Replacement #WE1M462 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow pull off the old bearing install the new drum bearing by sliding it onto the bearing shaftMoreNow pull off the old bearing install the new drum bearing by sliding it onto the bearing shaft replace the o-ring to secure. Replace the drum in the cabinet.
How do you remove a GE dryer drum baffle?
0:351:57GE Gas Dryer Drum Baffle Replacement #WE14M75 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTop carefully unhook the control panel tabs from the main. Top. Then lift up the top and removeMoreTop carefully unhook the control panel tabs from the main. Top. Then lift up the top and remove remove the mounting screws securing the baffle you're replacing.
Can you run a dryer without a baffle?
They help with the airflow and to fluff up your clothes while the dryer is tumbling. They do this by lifting clothes off the side of the dryer and into the airflow. If you didn't have baffles in your dryer, your clothes would stay clumped together and would not dry thoroughly.
What is a glide bearing on a dryer?
The drum glide bearing ensures that the drum turns smoothly. If the drum glide bearing wears out or is damaged, the drum makes a scraping noise and doesn't turn smoothly. Use a manufacturer-approved dryer part to install a new glide bearing. Replace the felt seal on the dryer front panel at the same time.
How do you fix a loose dryer baffle?
2:084:21Dryer Repair: How to Replace Dryer Drum Baffles | PartSelect.comYouTubeStart of suggested clipEnd of suggested clipAs you can see we have a loose baffle on this dryer to replace it we're simply going to rotate theMoreAs you can see we have a loose baffle on this dryer to replace it we're simply going to rotate the drum until the screws are in an accessible. Position now that we have the screws on top of the drum.
What is a dryer drum slide?
The front of the dryer drum rests on two drum slides which are mounted on the frame. The drum slides consist of a plastic strip resting on a heavy felt strip. Both strips are fastened to a metal bracket which is attached to the front cross member with two 5/16" sheet metal screws.
Why is my dryer squeaking when it's running?
The dryer bearings and motor need to be replaced. A faulty motor is usually identified by squeaking or grinding sounds, not by a burning smell. If the squeaking sound is coming from the back of the dryer, a faulty motor or bad bearings may be the problem.
How do I get my dryer to stop squeaking?
2:354:58how to fix a screeching / squeaky dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you look under the dryer you can see the idler. Pulley. This is the part you're going to orderMoreWhen you look under the dryer you can see the idler. Pulley. This is the part you're going to order and change the bearing inside this pulley is getting ready to lock up or cease. So I'm going to oil
How do you fix a squeaky GE dryer?
2:353:11Quick Fix: how to find squeak, GE dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so i got the lid. On. It's pretty quiet. I hear a little noise so i'm just gonna. Yes it'sMoreAll right so i got the lid. On. It's pretty quiet. I hear a little noise so i'm just gonna. Yes it's way better. Okay so basically put a leg right knee right here in the hand here and squeeze.
How do you fix a loose dryer baffle?
2:084:21Dryer Repair: How to Replace Dryer Drum Baffles | PartSelect.comYouTubeStart of suggested clipEnd of suggested clipAs you can see we have a loose baffle on this dryer to replace it we're simply going to rotate theMoreAs you can see we have a loose baffle on this dryer to replace it we're simply going to rotate the drum until the screws are in an accessible. Position now that we have the screws on top of the drum.
How do you tighten the baffle on an LG dryer?
2:433:58How To: LG/Kenmore Dryer Drum Baffle 4432EL1002A - YouTubeYouTubeStart of suggested clipEnd of suggested clipCompletely. With some free move all right that's uh the one in the middle. And now we can tightenMoreCompletely. With some free move all right that's uh the one in the middle. And now we can tighten those two. And go to the third. One. Now we can place the top back on.
What are the fins inside a dryer drum called?
Your dryer comes with three or four fins around the drum interior called baffles. These are charged with aiding in air circulation and fluffing your clothing as they tumble. However, if a baffle is loose, it can manifest itself as noise or may even snag and rip your clothes.
What is the thing inside the dryer called?
Drum – When you open the door, the inner tub or drum inside is where the wet clothes go. The drum spins when the dryer is in operation, and air is circulated throughout the inside in order to dry the clothes.
Where are the drum glides on a dryer?
Now locate your drum glides. In some dryer models, the glides are just inside the door and the drum fits into them when the dryer is put together. In other models, the glides are around the door side of the drum itself.
How to install replacement glides?
Carefully install your replacement plastic glides exactly as the old glides were installed. Use your set-aside screws to attach the glides to their mounts and press firmly until all clips clamp shut.
How to release clip on dryer?
Slide your putty knife into the seam under the dryer top. Slide it along the edge until you hit a clip. Press with the putty knife to release the clip, then do the same with the matching clip on the other side. There should be an audible clip release. 6.
How to get dryer top back on?
Gingerly pull the top of the dryer list back down over the body. Set it over the corners and then push it firmly back into position. You will feel the dryer top slot over the rest of the dryer body.
Why does my dryer rattle?
When a dryer gets old , it eventually starts to rattle. You may be familiar with the continual sound of an unreasonably noisy dryer. Maybe you’re hearing thumps, scraping, or just a constant clatter that never stops. Even worse, you’re 100% sure that no change or house keys are lost in there. Instead, the sound is coming from the dryer itself.
How to remove felt from dryer?
Remove it by peeling the old worn felt away from its glue and the mounting surface. Use your putty knife to remove stubborn felt and then peel away old glue.
How to pull dryer door sensor free?
You will see a small electrical clip which connects the panel to the door sensor. Carefully squeeze the clip where appropriate and pull to release. This will allow you to pull the front of the dryer free without wires as a tether.
What to do if you didn't change drum glides?
If you did not change the drum glides and the plastic frame that holds them has worn out, you will need to replace it as well. That part can be purchased here: GE WE14M124 Top Bearing Assembly for Dryer
Where is the catch on a dryer?
There are two “catches” that hook into the underneath side of the top metal panel (circled below). Set the back edge of the top panel on the top of the dryer and slide it back, centering it on the top of the dryer, and once it locks in place you can set down the top.
Where do you put your fingernails on a dryer?
Once you have removed those three screws you can put your fingernails in the seam and slide the bezel toward the back of the dryer.
Can you drop a drum glide down?
You will want to be careful not to drop part of each drum glide down into the drum bearing frame if they are as worn as mine were because they will fall apart when you lift them up. I took a pocket knife and slid it under each guide, while grabbing the right end with a needle nose pliers so I didn’t lose the end down in the plastic frame:
Can you get electrocuted from an electric dryer?
If it is an electric dryer like mine you are dealing with 220V. Regardless, make sure to unplug it before working it on so you don’t get electrocuted.