How to fix it: Drain the tub. Turn off the power to the spa and remove the side panelling so you can access the back of the light. Depending on your tub, you may have easy access to the light, or you may need to cut into the foam insulation.
How do you fix a hot tub light that keeps going out?
Replacing the entire hot tub light kit with new wires and connectors if often the fix. The spa light lamp has a wire connected to it, which can short out by being nicked, or chewed on by rodents or insects, or from being crimped for too long in one position.
How to troubleshoot a spa light that is not working?
Yet, the process for troubleshooting modern spa lights is the same as for traditional hot tub lights. Let's go through it step by step - here's a list of things to check when your spa light is not working. If you have an older tub that uses Air Switches to turn the light on and off, the first thing to check is the switch itself.
Why led LED lights for hot tubs?
LED lights are more versatile than other lighting systems. For some people, relaxing in a hot tub is a total sensory experience, with surround sound and a soothing light display to complement the warm, relaxing water.
How do I know if my hot tub light is broken?
Check to see if the glass on the tube has discolored or one of the wires connected to it is broken. If these signs exist, you may need to replace it. Depending on the age and model of your hot tub, it may use a relay system to power the lights.
How do I fix my hot tub light?
1:162:44How to fix light issues in your hot tub - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have to double check the connector between the two seats. And make sure that the channel is isMoreWe have to double check the connector between the two seats. And make sure that the channel is is guided in properly.
How do you change an LED spa light?
6:5612:39How to Replace a Spa Light Fixture - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown the conduit. And feeding the rope in along behind. I'm going to pull out this cable out of theMoreDown the conduit. And feeding the rope in along behind. I'm going to pull out this cable out of the condoms. It's tough to get started. Okay all the cable is out of the conduit.
How much does it cost to fix a hot tub control panel?
Cost to Replace Spa Circuit Board: Hot tub PCBs range from $200-$600, with an average cost of $300.
How do you change a lightbulb in a hot tub?
0:131:07How to Change a Hot Tub Light Bulb - 12 Volt Light Fixture - YouTubeYouTubeStart of suggested clipEnd of suggested clipEasier clip right there then that comes right out and then you just pops an LED bulb in yep ugly LEDMoreEasier clip right there then that comes right out and then you just pops an LED bulb in yep ugly LED bulb in put her back in that isn't LED bulb yeah it's the only be blog right there okay.
How do I change the bulb in my LED pool light?
Safety always being the number one priority, be sure to read all the instructions before you begin, and don't skip any steps.Turn Off the Power. ... Remove the Pilot Screw from the Light. ... Pry out the Fixture. ... Test the Wiring. ... Take the Fixture Apart. ... Remove the Old Light Bulb. ... Add the New Light Bulb. ... Test the Light.More items...•
How do you test a spa light?
1:514:47How to fault test a pool light fixture - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's with me touching it so it changes resistance even just by me touching it right. So you testMoreThere's with me touching it so it changes resistance even just by me touching it right. So you test either of the two you test the black one the ground. You test the white one the ground.
Is it worth it to repair a hot tub?
A hot tub is still worth fixing unless the shell or frame is cracked. Replacing a heater element, control pack, pump or blower is relatively easy and significantly less expensive than buying a new hot tub.
What is the average life of a hot tub?
5-20 yearsA hot tub can last anywhere from 5-20 years or more. Cheaper hot tubs made with lower quality materials won't last long. If those hot tubs are not well maintained, they may not last more than 5 years.
How do you fix a circuit board on a hot tub?
0:071:20How to Repair a Hot Tub Circuit Board : Hot Tub Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to locate your spas equipment pack usually. It's right underneath the display. You may needMoreYou want to locate your spas equipment pack usually. It's right underneath the display. You may need a screwdriver to remove. The panel on the equipment pack. And a screwdriver to remove.
Do you have to drain hot tub to change light?
The ClearRay bulb should be replaced and the quartz tube cleaned annually. To replace the bulb the hot tub does not need to be drained, however, to clean the quartz tube the hot tub will need to be drained first.
How do you remove spa light from pool?
0:0612:56How to Replace a Spa Light Bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd so the first thing you want to do is make sure that your GFI is off and when you open the panel.MoreAnd so the first thing you want to do is make sure that your GFI is off and when you open the panel. Usually what you see is a double pole breaker that usually goes to the pool if it's a 220.
How do you remove spa light from pool?
0:0612:56How to Replace a Spa Light Bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd so the first thing you want to do is make sure that your GFI is off and when you open the panel.MoreAnd so the first thing you want to do is make sure that your GFI is off and when you open the panel. Usually what you see is a double pole breaker that usually goes to the pool if it's a 220.
How do I change my pool light without draining the water?
0:2310:35Changing the Light Bulb in your Swimming Pool WITHOUT Draining ...YouTubeStart of suggested clipEnd of suggested clipSo all we have to do is get a phillips screwdriver. And we go to the top screw it's usually 12 o'MoreSo all we have to do is get a phillips screwdriver. And we go to the top screw it's usually 12 o'clock. And we put our screwdriver in here and we remove. This top screw.
How do I remove my pool light?
1:074:47Replace a swimming pool light bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need a phillips head screwdriver. There's one phillips head screw located in the top of theMoreYou'll need a phillips head screwdriver. There's one phillips head screw located in the top of the light you'll remove that out of the metal ring and the entire unit will slide out of the wall.
How do I replace my pool light housing?
2:175:36How To: Replace a Pool Light Fixture - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the light cord out of the pool wall. There is a conduit between the pool and the J box at theMorePull the light cord out of the pool wall. There is a conduit between the pool and the J box at the house. When you pull out the light cable at the pool. You'll be pulling the cable out of the conduit.
What is the best light for a hot tub?
Magnifying glass. LED lights are more versatile than other lighting systems. Image Credit: Jupiterimages/Comstock/Getty Images. For some people, relaxing in a hot tub is a total sensory experience, with surround sound and a soothing light display to complement the warm, relaxing water. LED lights are sold as part of some hot tub packages ...
How to check if a light switch is rusting?
Open the switch holder to examine the wiring. Look for any breaks in the wires that connect to the switch, rust in the circuit or where two bare wires may be touching one another. Problems in the switch prevent the lights from receiving power.
How to tell if a transformer is bad?
If the transformer feels excessively hot, it may be malfunctioning. If there is a burnt odor coming from inside, then the transformer is likely bad. If the transformer is the type that opens, then unplug it from the wall, open the lid and look inside. There may be one or two fuses inside that are burnt out and need to be replaced. Examine the fuses carefully for any bulges or discoloration; both indicate a bad fuse. If you think a fuse might be bad, replace it.
Can LED lights break down?
LED lights are sold as part of some hot tub packages or can be added later. As with any electronic gear, they can break down over time. Troubleshooting may discover a problem that can be fixed instead of having to replace the entire package. Advertisement.
What is wrong with my hot tub light?
Blown fuse. Another common problem that can occur with your hot tub lighting is that the fuse has blown. This is normally a tube type fuse. Check to see if the glass on the tube has discolored or one of the wires connected to it is broken.
Why won't my hot tub light work?
Some hot tubs have a transformer system, which reduces the voltage as per safety requirements. If they have become corroded or the wires are shorting, the lighting system of your hot tub won’t work. You will probably want to rely on a hot tub repair service to correct this problem.
How to check if a light switch is working?
Start by checking the switch itself. This lighting system works when a pulse of air is activated by pushing the switch. Check that you are able to move it up and down in a normal fashion. Also, look to see that the air hose is joined at both ends. Try blowing air through it gently to make sure it is passing through okay.
Can you replace a hot tub light bulb?
The best solution is to replace the entire bulb, provided it’s not a speciality light, which could be more expensive to replace. These are just a few of the common problems that can go wrong with your hot tub lighting. The majority of them are really minor and inexpensive to fix.
How to remove scale from hot tub?
To remove the scale, drain the spa water, scrub off the scale, refill the spa, and balance the water. Contact your dealer for tips on how to prevent future scale buildup. Remember to exercise caution when attending to your hot tub’s mechanical and electrical parts.
Why do you cover a hot tub?
Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature.
How do I keep my spa in tip top shape?
Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs. Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.)
Why do you need a hot spring spa?
Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements.
How to remove scum from a spa?
Wipe the scum off with a clean rag; if the layer of scum is heavy, drain the spa and use a spa surface and tile cleaner to remove the scum before refilling the spa. Contact your dealer for cleaning recommendations and tips to prevent future buildup. Algae growth. High pH.
What causes a spa filter to be dirty?
Filters are dirty. Excessive buildup of oils and organic matter. Improper sanitation. Suspended particles or organic matter. Overused or old water. Clean the filters. Shock the spa water with sanitizer. Add sanitizer as your owner’s manual recommends; adjust the pH and/or the alkalinity to the recommended range.
When to start thinking about spa maintenance?
The best time to start thinking about spa maintenance and repair options is before you even purchase your hot tub. When you buy a hot tub from a reputable Hot Spring dealer, your package includes access to a wealth of expert knowledge and certified technicians who can ensure the best possible outcome when your spa experiences problems. So, plan a visit to your showroom today. You can also refer to our frequently asked questions, request a personalized price quote, or download a brochure for more details about Hot Spring spas.
How do I check if a spa light is working?
Many times these are attached to the circuit board, and often look like small ice cubes. Hearing the relay click does not mean that it's good or bad, but they can get stuck, become corroded or otherwise fail. Again remember the Mantra - the problem lies where the power dies. You can test with a multi-meter, the power coming into spa relays, but it's often easier to remove the light lamp and check for power at the light, during or just after turning the light on. Most spa light relays are located just before the pool light lamp, or last in line before power reaches the bulb.
How long do LED spa lights last?
Spa light bulbs don't last forever, and this may be the first thing to check. Even LED spa light bulbs will fail, despite some claims that they last nearly forever, they usually burn out within ten years. What usually happens is a failure of 1 or 2 of the LED's which shorts out the entire bulb.
What is a spa transformer?
A transformer is a small magnet, wrapped in a primary and secondary coil, to create an electromagnet.
Why does my spa light bulb short?
The spa light lamp has a wire connected to it, which can short out by being nicked, or chewed on by rodents or insects, or from being crimped for too long in one position . It's a very thin wire, and it doesn't take much to stop the flow of power to the light bulb.
What type of fuse do I need for a spa light?
The typical type of spa light fuse is the tube type - metal ends with a glass center, so you can view the wire inside. If the wire looks ruptured or the glass is discolored or looks like it heated up, replace the fuse with the same type and amperage. You can check a spa light fuse with a multi-meter.
Why does my spa light fail?
Other times the spa light lamp will fail if corrosion damages the contacts or the light shell too much. For most spa lights however, the lamp well stays rather dry, and corrosion won't be noticed.
How to test spa light?
Modern spa lights are turned on by pressing the air button on the topside control panel , and usually has an indicator that displays when the light is on (or when it thinks it's on).
What to do if you suspect a leak in a hot tub?
If you suspect the leak is coming from the heater, shutting down power to the tub should be done immediately. Anytime you’re dealing with water and electricity, you want to protect the system (and yourself) from electric shock.
What Can Cause A Hot Tub Leak?
There are endless reasons for a leaky hot tub or spa, but the vast majority of issues originate from just a handful of places.
How to inspect a tub pump?
Access the equipment compartment by removing the side panels and look for any signs of leaks or dampness. Inspect the pump using a flashlight for greater clarity. Check to make sure the tub’s seals are tight.
What is the pump in a hot tub?
The pump is a major part of the hot tub’s filtration system. It’s responsible for sucking in water from the tub, pushing it through the filter to be cleaned, and then sending it back into the tub via the return jets.
Why does my tub have a crack?
If you do have a crack in the shell, it’s usually because the tub isn’t level . When water weight isn’t evenly distributed, it can cause stress fractures in the shell. Getting it level (or at least within half an inch), will alleviate this problem, as more stress fractures can occur the longer it remains unbalanced.
Where do leaks come from in a tub?
Leaks can come from inside the tub itself.
Can a hot tub pump leak?
Hot tub pump leaks are quite common, and there are a few areas you should look at as leaks can come from multiple points.
What to do if your hot tub is not flowing?
If you have considered all of these factors and the water still isn’t flowing as it should, then it’s time to call for backup. Put a call through to a professional or hot tub electrician to help you out with the water flow. It might be that some part of your hot tub is damaged and needs repair or a replacement. Either way, a professional will be the best bet to solve the issue.
How to fix a low flow hot tub?
If you can still notice the ‘dr code’ after the water is flowing through the jets, you can press the reset button or just switch the hot tub off and on again. This should take care of that problem.
What Is a Hot Tub Air Lock?
This will help you understand the best way to deal with it. A hot tub air lock is a problem that affects the overall functioning of the hot tub.
How to check if hot tub is working?
After you have screwed the cabinet panel back in place, you can turn on the circuit breaker or GFCI breaker to test if the hot tub is working fine. When you turn on the jets, you should see water circulating freely in the tub. This shows you have gotten rid of the air lock problem.
Why is my hot tub pump not working?
It might also be that the hot tub’s pump or jets are damaged or burnt out. This will also affect water circulation. Check the jets and the pump to be sure they are working well.
What happens when you drain a hot tub?
When you drain the tub, you empty not just the water in the tub but in the pump and plumbing lines too. Since there isn’t any water in there, air can get in, and when you refill the hot tub, the air gets trapped and stops water from flowing.
What is an airlock in a hot tub?
A hot tub airlock is one of the most common issues you can encounter with your hot tub. An airlock happens when there is air trapped inside the pipes of the hot tub. This reduces the level of water that is circulated inside the hot tub, and it also stops water from flowing to the pump and through the jets.
How to Fix an Air Lock in Your Hot Tub?
There are two different ways to remove all the trapped air from your hot tub or spa cabinet. We have listed them below and discussed the steps in detail. They are as follows:
Why does my hot tub make a humming sound?
This noise because of the trapped air block is a sign of more serious problems.
Why does my hot tub have an air block?
Generally, people drain the hot tub after using it and clean it before filling it. During cleaning, air can enter the tub and get trapped inside, causing an air block.
Why do you need jets in a hot tub?
Jets are an important part of your hot tub experience since they amplify the feeling of relaxation. Also, jets massage and help you recover after a long stressful day.
Is it better to fix an airlock in a hot tub?
No matter how easy it is to fix the airlocks in your hot tubs, it is always better to prevent a problem than fix one. Therefore, we provide you with a comprehensive guide to prevent airlock problems.
