How do I Turn Off the beeping on my DSC keypad?
Note: DSC keypads also emit "normal" beeping caused by the "Chime" function. You can easily toggle this on or off by pressing and holding the "Chime" button on any keypad that has function keys.
How do I Silence my DSC alarm system keypad?
2) Press the “#” key. This will silence your DSC alarm system keypads. With the noise eliminated, you can relax a bit and figure out what to do next. Be aware that the keypads COULD begin beeping again.
How do I Stop my alarm system from beeping?
The first step is to stop the beeping so you can calmly trace and work on the trouble that caused the system to beep. Using any keypad, check if the alarm system is disarmed. If it is not, put in your disarm code. Press the pound (#) key. To know the trouble detected by your alarm system, press the star (*) key, followed by number 2.
How do I Turn Off the beeping sound on my keyboard?
You can easily toggle this on or off by pressing and holding the "Chime" button on any keypad that has function keys. For keypads without a chime button, just press "*4". On this page, I’ll show you how to silence trouble beeping, and how to use a few easy keypad commands to find the source of the trouble.
How to stop a keypad from beeping?
How to diagnose a problem with a keypad?
How to check if your computer is armed?
How do you silence a DSC keypad?
Use the < and > keys to scroll to “Buzzer Control” Press * Use the < and > keys to scroll through the various buzzer settings, and adjust to your preference. “0” will silence the DSC keypad.
Why is my DSC alarm keypad beeping?
That infernal beeping is likely happening because your alarm panel has detected one or more trouble conditions. Some common beep-inducing issues include low battery indications, battery failure, phone line failure, and communication issues. Before you do anything, make sure that your system is disarmed.
How do I get my old DSC alarm to stop beeping?
NOTE: Pressing [*][2] will stop the keypad from continuously beeping. However we recommend you contact your service provider to fix the trouble condition as soon as possible.
How do you clear low battery on DSC alarm?
Press the '7' key and you will receive a number corresponding to the affected zone. The indicated zone is reading a low battery condition and needs a replacement battery. Replace the battery in the contact and the condition will clear.
How do I reset my DSC keypad?
To reset the detectors, press and hold the Reset key for two seconds or press *72. If your code is not valid, the system will not disarm and a two-second error tone will sound. If this happens, try again.
How do I change the battery in my DSC alarm?
0:141:37Replacing Batteries in a DSC Power Series WT5500 Wireless KeypadYouTubeStart of suggested clipEnd of suggested clipInside the back of the unit. Remove. The batteries and replace with the new double-a batteriesMoreInside the back of the unit. Remove. The batteries and replace with the new double-a batteries remount the keypad by lining the holes on the back of the keypad up with the tabs on the mounting plate.
How do I get rid of the yellow trouble light on my DSC alarm?
The trouble light is an indication that something is not functioning properly on your DSC security system. When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad.
How do I check the battery on my DSC alarm?
0:080:58How to Diagnose a Low Battery on your DSC Security System - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your security panel has a yellow trouble light on it you can determine what that trouble light isMoreIf your security panel has a yellow trouble light on it you can determine what that trouble light is by pressing star 2.
How do I get my house alarm to stop beeping?
1:253:53How To Stop A Beeping Alarm System-Old Unmonitored Alarm ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay you're gonna look on the keypad. And this goes for most alarm systems you're gonna look on theMoreOkay you're gonna look on the keypad. And this goes for most alarm systems you're gonna look on the keypad. There's gonna be something that says. Off if you look right here number one says off.
How do I change the battery in my DSC alarm system?
0:271:37Replacing Batteries in a DSC Power Series WT5500 Wireless KeypadYouTubeStart of suggested clipEnd of suggested clipInside the back of the unit. Remove. The batteries and replace with the new double-a batteriesMoreInside the back of the unit. Remove. The batteries and replace with the new double-a batteries remount the keypad by lining the holes on the back of the keypad up with the tabs on the mounting plate.
What does yellow triangle mean on DSC alarm?
system troubleIf your keypad is beeping or has the yellow triangle lit up this means that there is some kind of system trouble. This can be something as simple as a low battery, and usually is, or it could be something more serious such as a system tamper.
How to Silence The Beeping Keypads
Trouble codes are displayed on DSC keypads using either LED’s (on basic LED keypads) or as text (on LCD keypads with alphanumeric displays).Over th...
Top 6 Reasons Why Your DSC Home Alarm Is Beeping
If your DSC home alarm is beeping due to this condition, the main panel battery is low or failing. If you’ve recently had a power outage, wait 24-4...
Imagine The Possibilities
Lighting: Control room lights to dim to preset "scenes" such as "dinner", "movie", "party", etc... Or, for example, automate the control of an exte...
Why do DSC alarms beep?
DSC alarms provide top notch protection for you and your family. However, beeping is how your alarm communicates the trouble conditions or problems that you need to fix to ensure that your security system is in its tiptop shape. No problem. With this quick and easy troubleshooting and programming guide, you can work on the common DSC alarm system problems fast so you can go back to sleep or whatever it is that you are doing.
How to stop a beeping alarm?
The first step is to stop the beeping so you can calmly trace and work on the trouble that caused the system to beep. Using any keypad, check if the alarm system is disarmed. If it is not, put in your disarm code. Press the pound (#) key.
What to do if your transformer is not working?
First, make sure the transformer is plugged in nice and tight into the outlet. If it is still not working, check if the outlet has power by looking at your home’s electricity and circuit breakers. If it still does not work, replace the transformer as it may have a burnt fuse inside.
Why is my alarm number 5?
If it is number 5 displayed, press the number 5 for it to show the specific zone affected . It could be that a wireless sensor is not properly connected or something is amiss with that device. It also could be that your alarm system is not communicating well with your wireless devices.
Why can't my alarm detect my phone?
Your alarm system cannot detect the telephone line due to either damaged telephone lines or an interrupted phone service. First, plug a home phone into the telephone jack in your phone box and check for a dial tone.
How to check for zone tamper?
For Zone Tamper, simply check for the cover of the affected zone or device. The cover may be missing or not fitted properly.
Does the keypad display trouble codes?
Your keypad will then display a trouble code number or illuminate a certain zone, which has a corresponding meaning in the trouble code table in the User Manual. However, if you use DSC model PC4020, which has an LCD keypad with fixed displays, instead of displaying numbers, it will spell out the trouble condition.
Why does my DSC alarm beep?
That infernal beeping is likely happening because your alarm panel has detected one or more trouble conditions.
What to do if your alarm keeps beeping?
If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery. If you have access to the panel, you can do this yourself. If not, contact your alarm company for service. This means your panel isn’t getting power.
What does a 5 on a keypad mean?
If the numbers 5,6, or 7 are displayed, then the issue may be with your system sensors such as keyfobs, keypads, door and window transmitters, or other wireless sensors. If a 5 is displayed, press [5] to determine which zone is affected. Check the sensors in that zone and correct the issue if possible. If not, contact your security company. If a 6 is indicated, the system has detected a tamper condition and you should contact your security company immediately. If a 7 is indicated, the batteries in your wireless sensors may be low.
How to tell if a DSC alarm is a problem?
Then, to determine the condition that’s troubling your DSC alarm, press the * key followed by the number 2. Your keypad should then spell out the trouble condition, display a trouble code, or otherwise indicate which zone is causing the beep. Refer to your DSC owner’s manual to decode the codes as necessary.
What does it mean when a transformer beeps?
This means your panel isn’t getting power. If your building or the neighborhood has lost power, your system will operate on battery, but it’ll let you know it’s operating on battery. If you have power, however, make sure that your transformer is plugged in snugly, then check your home’s circuit breakers. If you’re still beeping, you may need to replace the transformer. Still at a loss? Contact your provider for service.
What does code 8 mean on a security system?
If a 7 is indicated, the batteries in your wireless sensors may be low. Code 8: Loss of Time & Date.
How to stop alarm from beeping?
One way you can stop the beeping is to reset the alarm system. Locate the keypad and pull down the panel that covers the keypad on your alarm system. Then, enter your 4 digit master code, wait 2 seconds, and then enter it again. On some models, this step will reset the alarm and stop it from ringing.
Why does my DSC alarm go off?
Once the alarm is off, try to find out why it went off. The most common reasons include power failures, intruders, smoke, and problems with the phone line.
How to reset smoke alarm if still ringing?
Use the keypad to enter the code “*72.”. This resets the smoke sensors, which will cause the alarm to stop if it is still ringing. If your keypad has an “Enter” button, press this once you have entered the code. If you make a mistake while entering your code, press the pound (#) button, and then start over.
How to reset a ringer alarm?
1. Open the access door and enter your master code twice. Pull down the panel that covers the keypad on your alarm system. After this, simply enter your 4 digit master code, wait 2 seconds, and then enter it again. On some models, this step will reset the alarm and stop it from ringing.
Why does my alarm ring?
There are a number of possible reasons why your alarm is beeping unexpectedly. The most common reason is a power failure. Check if the lights on the property are working to ascertain if the power is currently on. If the power is out and the alarm is ringing, this indicates that the batteries in the alarm system are dead and need to be replaced. It's also possible that your alarm is doing exactly what it's supposed to do: detect intruders. Check your property for any signs of intrusion, such as broken windows, stolen goods, and dirty footprints inside. If you have a video monitoring system on your property, check the footage to rule out the possibility of an intruder. If your alarm is connected to the phone lines, temporary phone outages can cause the alarm to ring. Call your phone provider from your mobile phone to find out if there have been any phone line problems in your area.
How to reset alarm panel?
The simplest is to power it down and then power it back on, which is called a power reset. Open up the panel and look for the power button. Hold it down until the panel turns off and there aren't any lights on.
What is a DSC alarm system?
Search the area for signs of an intruder. Your DSC alarm system is designed to alert you of unusual motion in and around your property. Check your property for any signs of intrusion, such as broken windows, stolen goods, and dirty footprints inside.
How to stop a keypad from beeping?
NOTE: Pressing
- ] [2] will stop the keypad from continuously beeping. However we recommend you contact your service provider to fix the trouble condition as soon as possible.
How to diagnose a problem with a keypad?
At any keypad connected to the main system, press [*] [2] to have the panel diagnose the trouble for you. The trouble light will flash and the LCD will display the first trouble condition present. Refer to the Trouble Summary below to determine the trouble condition (s) present on the system.
How to check if your computer is armed?
Check to see if your system is in the armed state. This is shown by a red lock symbol on the keypad display. If it is armed, punch in your access code to disarm the system so that the trouble can be diagnosed.
