how do i hide my hdmi cable

Specialists identify two main resolves to hide the HDMI or other cabling at home. The most straightforward approach is to attach your cabling to the appropriate places to the wall and conceal it with a raceway. A raceway is usually a shallow metal or plastic channel that mounts directly on the wall.

Full Answer

How to hide your TV wires in 30 minutes?

How To Hide Your TV Wires in 30 Minutes DIY YouTube from www.youtube.com. If your cords are on the shorter side, opt for an in. ‘test mount the tv, and using two vertical battens and some 9mm marine ply, make a wide trunk to hide all the power and signal cables towards the floor,' he says.

How do you set up a HDMI cable?

• Look at for a data cable plugged into the back or side of your room’s TV. ...
• (Gently) pull out the cable. They usually have a small-and very fragile—plastic tab you need to hold down to take it out. ...
• Turn the TV off and on again, and you should now be able to use the HDMI input.

How to hide TV wires on or behind a wall?

Tools you’ll need to hide wires:

• Stud/ wire detector
• Multi-tool with flat saw attachment
• Drill and screw bits
• Spirit level
• String
• Tape Measure
• Rawl plugs
• Brush Wall Plates

How to assemble a HDMI cable?

• Some PC's may use a regular HDMI port, while others will use an HDMI mini or MiniDisplay port.
• For HDMI mini and MiniDisplay cables, one end of the cable should be an HDMI mini or MiniDisplay cable which you can plug into your computer, and the other end ...
• Not all computers have an HDMI port. Some older computer may use a VGA or DVI cable. ...

What is the easiest way to hide cables?

Wrangle your cords with cable ties. ... Label your cables. ... Buy new (shorter) cables. ... Install new power sockets or HDMI ports behind the TV. ... Conceal TV cords in a cable raceway. ... Hide surround speaker wires by skirting the floor molding or laying down a rug. ... Mount your power strip to get cables off the floor.

How can I hide my TV cords without a console?

0:000:55How to Hide TV Cables Without Cutting the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wallMoreHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wall. You can also paint this the exact same color as your wall. So your cables virtually disappear.

How can I hide TV and video cables?

15:1016:53How To Hide Your TV Wires in 30 Minutes - DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you have an insulated wall then this project can be done pretty much just as easily just byMoreSo if you have an insulated wall then this project can be done pretty much just as easily just by using a tape measure to fish your wires through the wall.

How do I run HDMI cable through wall?

11:0614:49How To Run Coaxial And HDMI Cable In The Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt comes out right here where the tv receivers are going to be. And as you can see in the back ofMoreIt comes out right here where the tv receivers are going to be. And as you can see in the back of the box i just drilled. Out with the drill bit enough to fit both cables.

How do you hide TV cords on wall?

Here are Ways to Hide Your TV Wires on the WallUse hooks behind your furniture to hide TV wires. A DIY-hack for packing away all of those pesky wires hanging from your wall-mounted TV is to use plastic hooks/pegs. ... Use cord covers to hide TV wires. ... Hide TV Wires Behind the Wall. ... Get the Best of all Worlds with MantelMount.

How do you hide TV cables in the wall?

13:3935:22How To Hide TV Wires In Wall By A Pro Installer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to put the power outlet on the inside. And then I'm going to put this HDMI cord on theMoreSo I'm going to put the power outlet on the inside. And then I'm going to put this HDMI cord on the outside. So we'll do the power outlet first and then we'll just run the HDMI cord second.

How do I manage cables behind my TV?

To avoid knots of cables behind your TV, use cable ties. Plastic zip ties that cinch closed or hook and loop fastener strips wrap around bundles of cables to prevent them from becoming loose or otherwise getting tangled. If your home theater components are close together, use these to keep them organized.

How much does it cost to mount a TV and hide wires?

Cost to Mount TV and Hide Wires Mounting a TV and hiding the wires in the wall could run upwards of $1,000 or more. If you opt for cable covers that adhere to the wall, you won't pay nearly as much. These kits run from $10 to $40 for materials only, not counting labor.

What is an HDMI wall plate?

HDMI Wall plate is fantastic to own for any home entertainment room. They are usually used for setting up HDMI wires inside the wall structure and for long cable runs. Many people buy them to clean up messy wires and run cables through the wall for that professional look.

How do I run HDMI across a room?

2:245:23How to Run 4k HDMI Over Long Distances - Ask The Tech Guy 20YouTubeStart of suggested clipEnd of suggested clipUnbalanced is a little doohickey. And that's the technical term a little doohickey. That has HDMI onMoreUnbalanced is a little doohickey. And that's the technical term a little doohickey. That has HDMI on one end. So you plug your HDMI. Short HDMI cable into it and Ethernet on the other end.

How can I hide the wires in my living room?

Here are some quick tips to let you hide the cords in the living room.Put the Cables Behind the Wall. The best way to hide your electrical cords is to wire them through a wall. ... Tape the Cords. ... Hide the Cords Behind Furniture. ... Lift the Power Strip Off the Ground. ... A Basket Cord Holder. ... Get Creative. ... Command Hooks. ... Zip Ties.More items...

How do you hide electrical cords in the middle of the room?

To hide electrical cords in the middle of a room, you can:Add some area rugs.Hide cords under furniture.Move cords under the floorboards.Add some cord protectors.Run electrical cords along your walls.Clip cords to your baseboards.Get some power strips.Hide electrical cords in baskets and boxes.More items...

How can I hide a lot of wires?

You can be creative with ways to hide the wires of your home electrical devices: Bind power cords with tubing or cable ties. Place a decorative basket next to a table and insert the bound cords into the basket and out of sight. Use dark-colored plastic zip ties to attach power cords to furniture legs.

How to hide cable TV?

The first is super easy and doesn't require many (if any) tools. You'll use on-wall cable raceways which means no cutting into your wall, but you'll still be able to see the cable channels. The second method is a little more involved but still pretty damn simple.

How to minimize snags on wire?

Protip: minimize snags by folding the last 3 inches of the wire back on itself and tape it down. The smooth edge is much easier to feed through insulation. Once all your cables are through the bottom hole, pop on the covers and you're done. Painting them to blend in is up to you.

Can you put wires down the wall?

Depending on your setup, you probably can use some household items to get wires down the wall. You'll want something stiff enough to push past insulation, but not so inflexible that it can't be fed into the wall. If you have an extra wire hanger or use any thick wire around the house you can unravel it to make a simple wire fishing stick.

Can you cover wires from a TV?

If you just need to cover wires from your TV straight down to an outlet, a single on-wall cable channel will do the trick. It pairs perfectly with a mounted TV and is easy to install. All you'll need is a screwdriver. It's got a large cable capacity so it shouldn't have any issues hiding all your cords.

2. Label your cables

If you want to go the extra step in organizing you can buy printable tags so you can tell which power cable is which, for example. This is especially handy if, like me, you're constantly plugging in a lot of new equipment. Some receivers, like those from Denon, come with stickers that can help you sort out what's what.

3. Buy new (shorter) cables

Do you end up looping your too-long cables and stuffing them under the unit or up the back of the TV? Maybe you need to buy shorter runs. You can buy power, HDMI, RCA and speaker cables that are as short or as long as you need.

4. Install new power sockets or HDMI ports behind the TV

If you decide to wall-mount your TV, then hanging wires are going to be obvious from the get-go. If you're lucky enough to own your own home and have sheetrock walls, you could pay an electrician to install a power socket or HDMI ports in the wall for you.

5. Conceal TV cords in a cable raceway

A cord or cable raceway is basically a flat PVC tube that attaches to the wall and is able to be both cut to length and painted to match your interior. The front of the "tube" clicks on and off, so it's easy to add or move cables if you need to. Entire cable concealing kits are available in a variety of colors.

6. Hide surround speaker wires by skirting the floor molding or laying down a rug

While cable ties and raceways are great for keeping cables organized behind your TV, what happens when you have to run cables elsewhere in the room? Surround speaker wires are probably the most common example.

6 products to organize all of your messy cords

For someone who deals with tech all day, I was unreasonably excited to buy myself a clamp-on power strip for my desktop. The main thing it did, and which it can do for your TV unit too, is to lift the connections off the ground and tuck them neatly out of sight.

How to hide cables in a wall outlet?

1. Hide your cables in a box. Place a decorative box on a shelf just under the cables. Gather the cables together and close the box to hide them. You can also cut a small hole in either side of the box and feed the cables through this hole to the wall outlet to conceal them.

How to make a design with cables?

Work the cables into an interesting shape or design and then secure them in place with tape. For example, you can make the shape of a building with your cables and then tape the shape in place.

How to feed wires down through wall?

Make sure the opening of the cable plate is facing downwards, as you'll be feeding the wires down through the wall. There should be two small flaps on the side of the cable plate that can be manually pushed up and down. Push the flaps inward so they're tucked into the side of the plate.

How to fish HDMI cable?

The easiest way to fish an HDMI cable is to unhook one of your cables in the wall and tape a string to its end. Pulling it out, you will pull the string in. You can tape the HDMI wire and the existing one to the string and pull them both back in through the two horizontal studs.

What is the responsibility of hiding cabling behind the walls?

Final Thoughts. It is our responsibility to make your homes comfortable and cozy for our children and us. Hiding the cabling behind the walls is one of the most basic things we can improve. Of course, hardships can always appear, even in the most straightforward situation.

What is the code for video cabling?

By law, all rated lines have alphanumeric codes stamped on their outer insolation. The rate code for in-wall video and data cabling is CL2 or CL3. Different rate codes indicate the other specifications of the cabling.

Is it bad to hide HDMI cables?

Hiding HDMI cabling of your home may look like a minor problem, especially if you have a leaking roof or plumbing problems. However, cables hanging everywhere are not only annoying but also dangerous for your small children, running all over the house.

Do you cut off power cords when drilling?

You do not want to cut off any power or A/C cable that goes through your walls when you start drilling. It would help if you also found out where the studs are in your walls. If you only need to hide the HDMI cable of your TV in the Living room, for example, you may prepare for work faster.

Can HDMI cables be installed in the wall?

There are two standard solutions for installing your HDMI cabling in the wall. The commonly used solutions are to hide the cables on the wall or inside the wall.

How to hide TV cords without cutting the wall?

1. Make a Wood Frame and Cover It in Fabric. It’s a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.

What happens if you don't have a TV stand?

If you don’t have your TV mounted on the wall and you use a standard TV stand, chances are great that there’s a jungle of wires behind the stand. To organize and hide the cluttered cords, first, you have to shorten each of them individually to the length you need.

Can you hide wires behind a TV stand?

Your goal is to make cords as short as possible and reduce the number of individual cords to a minimum. After this step , your wires will be much more organized and ready to be concealed. You can hide the wires behind the TV stand in many ways.

Is it dangerous to have a TV cord?

TV cords sometimes can be tripping hazards and they’re potentially dangerous for small children when they have access to them. If you’re looking for stylish and quick solutions to conceal the jungle of cords without having to make any permanent changes, you’re at the right place.

Is it safe to hide TV wires?

That’s all. Hiding TV wires not only makes a room look better but also makes it much safer. However, there’s so much more you can do to make your home a safer place. We’ve collected the most important easy-to-implement home safety measures you should know in this article.

Can you hide TV wires behind a fireplace?

Conceal TV Wires Behind Wall Trim. It’s not the easiest and quickest way to hide your TV cords, but it’s certainly an eye-catching one. It can be a great solution when you want to hide TV wires over a fireplace.

Supplies & Tools You Will Need for This Project

The following items are affiliate links and I may receive a small commission if you chose to buy through these links (at no extra cost to you). As an Amazon Associate, I earn from qualifying purchases. But we only recommend products we would use ourselves.

Step-by-Step Tutorial on How to Hide TV Cords & Wires

It’s not that hard to put those tv cords and wires behind the wall. Follow this DIY project for a neat appearance on your TV wall.

Last Words

We hope you achieved your goal with this tutorial on how to hide your TV cords and wires.

How to hide TV wires?

To install and effectively hide TV wires, measure the span of wall between the base of the screen and the floor— that’s how the length of cord cover you need, and you can often cut to fit. In the case of the Cable Concealer Kit, you’ll cut the base and top of the cord cover using a hacksaw. Then, mount the raceway base to ...

How to keep cords out of wall?

The best solution for keeping the cords of a wall-mounted TV out of sight involves hi ding them behind the wall itself using recessed cable plates ( e.g., Datacomm Cable Organizer Kit, available on Amazon ). Remove the TV from the wall (or move it aside if your TV has an adjustable arm), and then use a stud finder to find two stud-free sections of the wall: one behind where the screen would sit, and another further down the wall near an outlet. These are where you’ll make your cuts using a utility knife, fit two cable plates, and feed the TV cords in and out of the wall. Your guests may just mistake your new media setup for a wireless entertainment system!

How to make a dangling cord disappear?

1. Hook Cords to the Back of Your Furniture. Dangling cords disappear quickly when you anchor them to the silhouette of the nearest furniture. To do so, adhere clear Command Cord Clips (available in medium and large sizes on Amazon) along the back edges of your furniture.

Installing HDMI Cabling in The Wall

• Specialists identify two main resolves to hide the HDMI or other cabling at home. The most straightforward approach is to attach your cabling to the appropriate places to the wall and conceal it with a raceway. A raceway is usually a shallow metal or plastic channel that mounts directly on the wall. The cables are inserted into the raceway channel,...

See more on hometheateracademy.com

Preparation

Installation

Final Thoughts

Sources