- Measure First, measure your window opening. Factory-made curtains are always a bit bigger than the window opening. ...
- C alculate You’ll have to do some calculations to figure out exactly how much fabric you need for your custom made curtains. ...
- Get the Tools and Hardware It takes more than just fabric to do the job. You’ll also need curtain rods and mounting hardware. ...
- Buy your Fabric Now, it’s time to visit the fabric store. Before you make your choice, look for coupons, and visit the clearance section. ...
- Prewash Any time you’re working with fabric, shrinkage is always a possibility. It’s a good idea to wash and iron your fabric before you get started.
- Sew Spread your fabric out on your worktable, and start measuring, cutting, and sewing. Double-check every cut before you make it!
- Rewash and Re-Iron It’s hard to wash your curtains when they’re hanging on the wall. ...
- Hang
How do you make a simple curtain?
Part 3 Part 3 of 3: Securing the Edges
- Place a pin in each of the corners. Before you take your valance piece to the sewing machine, place a pin in each of the valance's corners to help ...
- Sew a straight stitch 0.25 inches (0.64 cm) from the inner edge on all 4 sides. ...
- Sew an extra stitch along the bottom of the top fold. ...
- Trim away any excess threads. ...
- Hang the valance. ...
How to make your own curtains?
There are a number of ways to create a DIY shoe wall on a budget. And here they are… The IKEA Billy Bookcase has many uses in the home, but the Metro Lifestyle team can attest that it makes a fantastic shoe wall. Cheap and easy to assemble, it comes in a ...
How to make easy lined curtains?
Supplies:
- curtain fabric
- lining fabric
- pins
- rotary cutter
- cutting mat
- straight edge
- measuring tape
- iron
- ironing board
- sewing machine
How to make a cheap, Awesome, DIY curtain rod?
Instructions
- Cut the electrical conduit to length. ...
- If you choose to paint your curtain rods, it is easiest to paint each of the pieces before assembling the DIY curtain rod brackets. ...
- Once the primer is fully dry, paint each component with a few thin coats of your chosen spray paint.
- Align the hold of each one-hole strap with the last hole of each corner bracket. ...
How do I make my own curtains?
2:227:32Learn to Sew: Simple Curtain Panel - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow we'll take some measurements to see how much fabric we need to cut first measure from bracket toMoreNow we'll take some measurements to see how much fabric we need to cut first measure from bracket to bracket to find the width. We're. Making two panels for our window.
How much does it cost to make your own curtains?
To give you an idea, the very cheapest decor fabrics start between $10-$20 a yard. You'll need at least 3 yards per panel, meaning you're already paying $30 for a single panel, and that doesn't even include lining.
Is it cheaper to make your own curtains?
Apart from saving just small pennies for your curtains, you should also consider if it's time-wise for you; convenience is a big factor these days. Sewing curtain fabrics might be cheaper, but it sure do cost you a lot of time.
How do you make curtains for beginners?
How to Make Curtains1.Measure. If you've ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! ... Cut fabric. ... Pin and sew one side. ... Create lining hem. ... Sew second side. ... Flip curtain right-side out. ... Create rod pocket. ... Iron.More items...•
How hard is it to make your own curtains?
Making curtains is easy, but only if you know the basics Curtains are almost all straight sewing, making them an easy project for beginners. That said, there are still some basics to master before embarking on sewing curtains for the first time.
What kind of material do you use to make curtains?
The most common types of curtain fabric are cotton, silk, linen, polyester, velvet, acrylic, rayon, brocade, lace and voile.
What are the easiest curtains to make?
The cheapest (and easiest) curtains to make are tab top. The panels aren't as gathered so they use up less fabric than a pair made with header tape.
How much material do I need to make curtains?
There's a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How expensive should curtains be?
Curtains and Drapes: Typically, drapes and curtains cost an average of $100 to $250 per panel. However, this can range between $7 to $1,500 overall, depending on how fancy you want to get.
How do you finish the edges of curtains?
0:276:26How To Sew An Edge Finish - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you have three different options. If you have a serger or an overlock machine and you know to useMoreSo you have three different options. If you have a serger or an overlock machine and you know to use it I would just finish the edge here. And then you fold it up a quarter of an inch.
How do you make curtains without a sewing machine?
2:437:02How To Make Easy and Inexpensive Curtains Without A Sewing MachineYouTubeStart of suggested clipEnd of suggested clipTo where the seams are and right on the very edge at the top I want to put just cut a little wine inMoreTo where the seams are and right on the very edge at the top I want to put just cut a little wine in it now you want to make sure that you don't go all the way through.
How do you cut fabric straight for curtains?
Lay the ruler on the fabric so that one side lines up along the selvage edge. The other side of the ruler will cross the fabric at a 90-degree angle. Hold the ruler firmly in place and use a marker to draw a line. This line will be perfectly straight and perpendicular to the selvage.
How much does it cost to make blackout curtains?
Average Cost of Curtains for a House by Opacity LevelType of OpacityReady-Made Costs per Window (Materials Only)Custom-Made Costs per Window (Materials Only)Semi-Sheer$30 - $125$40 - $225Semi-Opaque$60 - $175$50 - $300Opaque$75 - $225$60 - $350Blackout$75 - $250$125 - $4001 more row•Dec 20, 2021
How much fabric do I need for curtains calculator?
There's a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How much do quality curtains cost?
Curtains will range anywhere from $15 to upwards of $200. Commonly, however, you will be able to find high-quality curtains at around $70, although this price depends on factors such as size, type, customization, and material.
How much do custom window treatments cost?
Basic Costs According to HomeAdvisor, the national average for new window treatments is $463 per window, with the typical range between $106 and $828.
How to make curtains look classy?
Tip: To make your curtains look classy and purposeful, match the color of the ring clips to the color of the curtain rod. 9. Slide the rings onto a curtain rod to hang the curtains. Remove the rod from the window, and position the rings on the rod so the panels have an accordion-like shape.
How to measure for curtains?
1. Measure the window, adding length and width for seams. Use a tape measure starting at or just above the top of the window, and measure the length and width. Make sure you measure the length down to the area on your window or wall where you’d like the curtains to lie.
How to reverse pattern of curtain?
Position the opening of the top seam on the curtain at the end of the rod with the pattern of the fabric facing toward you. Make sure the seams are facing toward the window, and then hang the rod up on the wall. If you leave the bottom seam open, you can flip the curtains upside down to reverse the pattern of the fabric.
How to split curtain panels?
To split the curtain into 2 panels, divide the width in half so each of the panels are an equal width and the height remains the same for each.
What is the best fabric for curtains?
Heavier fabrics are great for filtering out light and making a room cooler and darker. Lighter fabrics are best for letting in natural light and warmth. When you purchase the fabric, remember to add extra length for seam allowances, as well!
How to fuse fabric together?
Place a damp towel on top of the seam and iron the fabric in place. Check the tape directions to set the iron to the proper temperature, which is normally the “wool” setting. Then, lay a damp cotton towel over the seam, and move the iron along the seam, holding it in place for 10 seconds in each spot to fuse the fabric together.
How to make a crease in fabric?
Iron the seams to crease the fabric. Set your iron to the lowest level and press along each of the seams. Move the iron up and down the seams firmly and quickly for 5-10 seconds per seam. This will create a crease in the fabric to guide you when you apply the fabric tape.
How much to add to curtain size?
Hall recommends adding 7 1/4 inches to both the height and width measurements to account for the top pocket and side and bottom hems. Cut a rectangle of your curtain fabric to these measurements, and then cut the lining fabric three inches shorter than the fabric (but the same width).
How to make a curtain crisp?
Now that you have three sides sewn, reach into the bottom corner sand flip the curtain right side out! Trim any hanging threads and iron the seams to make them crisp. If you don't have an iron, just press them with your fingers to come to a point.
How to make a lining hem for a curtain?
Create lining hem. Fold 1 1/2 inches of the bottom edge of the lining fabric and 3 inches of the curtain fabric. Pin and stitch where they overlap to create the curtain's bottom hem . If the hem seam doesn't meet the side hem, stitch them together so there isn't a loose flap. 5.
How to sew lining and fabric together?
Hall recommends finding the center of the fabric and lining, marking that point and pinning fabric and lining together there, and then working out from the center to the sides with the sewing machine. It's ok if the lining fabric comes up short. Sew these together like you did the first side.
How to make a pocket for a curtain?
Fold the top fabric over 3 1/4 inches, pin, and sew along the fabric's edge so that a pocket forms between the top of the curtain and the stitch. Cut any loose threads.
How to measure for curtains?
If you've ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! For curtains, first figure out where you want your curtain rod on the wall (the closer to the ceiling, the taller they'll seem) and secure the brackets accordingly. Then measure from the top of the curtain rod to where you want the curtain to hit. In the video above, ours ends just below the window sill. Next, measure the width of the window.
Do you need curtains after moving?
If you've ever had to rough it a few days (or weeks—we're not judging) post-move with no window treatments, you know just how essential it is to have them. Both functional and decorative, curtains, drapes, and blinds are a necessary part of any room design. And the best part? You can make them yourself!
How to add trim to a curtain?
Add trim by cutting a piece of decorative ribbon or fringe the hemmed length of the curtain plus two inches. Hot glue the trim wrapped around the top edge of your curtain panel one inch down on the backside. This will give nice detail and prevent fraying or unraveling.
How to make curtain panel thicker?
Clip a sheer curtain behind your curtain panel to make it thicker.
How to make a pinch pleat with curtains?
Hot glue in place. Create a pinch and pleat with curtain clips by folding in two small folds of fabric at the top edge and hold together with a clip. Repeat until you have all curtain rings on it and hang!
How to make curtains look fuller?
Measure your window length and width. Window treatments look best hung close to the ceiling and down to the floor. Allow for extra width to make curtains look fuller and windows wider. You may be able to use the width of the fabric to save you cuts. Add 2 inches to the length and width for hem allowance.
How to make a sleeveless sleeve?
Layout fabric upside down, measure, and mark with a pencil. Fold up the bottom edge of the fabric to the marks and secure with straight pins. Cut across using the folded edge as a guide. Lay your fabric cut over the remaining fabric and pull up the cut piece until the pattern lines up with the piece underneath.
What is a Japanese style curtain?
Curtains make excellent room dividers and this Japanese style curtain takes the place of a door. Instead of closing off two spaces, it creates a soft partition that you can still pass through. If you wanted to let more light through, you could use lighter or sheer fabric. Noren Room Divider Curtain from Sew in Love.
Can curtains be used for windows?
Curtains and other window treatments are a great way to refresh or finish off a room, and often they're easy to sew yourself. They function as a way to control the light or create privacy, but they also show off your style. But curtains aren't only for windows.
Can you sew curtains on a pergola?
Curtains aren't always for windows. In this tutorial, A Beautiful Mess shows you how to sew curtains for an outdoor pergola. They're helpful for creating some shade, shielding you from cooler breezes, and they look romantic, too. You could even adapt this project to make curtains on a front porch or covered patio .
Can you sew pleating tape to curtains?
To fix this problem, Laura from The Turquoise Home shows you how to sew drawstring pleating tape to the top of your curtains. The transformation takes drapes from sloppy to sophisticated!
