Repairing your old Delta faucet
- Turn off the water supply to your shower. ...
- Go outside and turn on any of your home’s wall hydrants or faucets. ...
- After you have removed this screw, the bonnet nut will also have to be removed. ...
- Equip yourself with a pair of fine tweezers. ...
- Once you have removed both the springs and the seats, inspect the inside of the housing. ...
How do you repair a leaking bathroom Delta sink faucet?
This is how to how to fix a leaking Delta double-handle bathroom sink faucet:
- Turn off Water to the faucet. ...
- Open the faucet to drain out all the water in the hoses and plug off the drain to prevent dropping anything down the drain.
- Remove the handles. ...
- Remove the retaining ring. ...
- Pull out the stem assembly. ...
- Pull out the seat and springs. ...
- Replace the seat and springs. ...
- Install the stem assembly. ...
How to remove a Delta bathtub faucet handle?
Removing Delta Bathroom Faucet Handle
- Turn off the Water. Turn off the water passing through the faucet. ...
- Remove the Decorative Cover. If it is a single control faucet, remove the decorative cover by unscrewing it counterclockwise. ...
- Turn the Screw Cap. ...
- Remove the Screw. ...
- Take Out the Pin. ...
- Take Out the Cartridge Assembly. ...
- Remove Handle from a Delta Faucet. ...
How to repair a leaky bathroom faucet?
- The first step is to remove the faucet spout. ...
- Use a utility knife to score the sealant where the spout and bathtub wall meet for easier removal.
- Remove the length of pipe, called a pipe nipple, with a wrench.
- Wrap the threads of both ends of the nipple with plumber’s tape or Teflon tape.
- Install the nipple into the 90-degree elbow pipe within the wall. ...
How to replace a Delta Roman tub faucet?
- Turn off the water valves at the main incoming water pipe.
- Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench.
- Pry out the clip around the cartridge with a pair of needle-nose pliers.
- Install a new cartridge inside the faucet head.
What is a delta faucet?
How to tell if a faucet is leaking?
How to remove valve seat and spring?
How to replace a valve stem?
Where is the valve seat on a faucet?
What to do if there is no water shut off valve?
Can you reinstall a faucet stem?
See 2 more
How do I know what model Delta Faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do I change the cartridge in my Delta bathroom faucet?
1:253:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe cartridge is held onto the valve body by a bonnet nut. Use a wrench or channel lock pliers toMoreThe cartridge is held onto the valve body by a bonnet nut. Use a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarter term stop is set on top of the cartridge.
Why does my Delta Faucet keep dripping?
Your Delta® faucet is designed for leak-free performance. Through normal use, and depending on the water conditions in your area, the seats and springs experience wear and may need to be replaced occasionally. It is also possible that there is sediment or debris in your faucet.
How do you replace a Delta faucet stem?
3:396:00How to change the stems, seats and springs in a Delta Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust wiggle it back and forth. I can hop up water that's down in the cavity here. And then I willMoreJust wiggle it back and forth. I can hop up water that's down in the cavity here. And then I will take out the seat and spring. The same way as I did on the other side.
How do I know if my faucet cartridge is bad?
Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
How do you change a single handle bathroom faucet cartridge?
2:133:54Repair and Replace (Single Handle | Moen | Bathroom Faucet) - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench to twist back and forth to loosen the cartridge. Now use the pliers to pull theMoreUse a wrench to twist back and forth to loosen the cartridge. Now use the pliers to pull the cartridge straight out of the valve.
How long do faucet cartridges last?
between 15 and 20 yearsHow Long Do Faucet Cartridges Last? Both kitchen and bathroom faucets have a lifespan of between 15 and 20 years. This means that the cartridge these faucets come with have a similar lifespan.
How do I stop a dripping faucet?
0:072:54How To Fix A Dripping or Leaky Double Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe aerator if it won't unscrew soak a towel and white vinegar and wrap it around the aerator toMoreThe aerator if it won't unscrew soak a towel and white vinegar and wrap it around the aerator to help loosen mineral deposits. After an hour gently twist off the aerator.
How do you fix a leaky bathroom faucet single handle?
0:381:36Leaky Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the screw and lift off the handle. This is the adjusting ring tighten. The adjusting ringMoreRemove the screw and lift off the handle. This is the adjusting ring tighten. The adjusting ring with a pair of needle nose pliers. The tightening will compress the parts inside the faucet.
How do you remove an old Delta bathroom faucet?
1:032:43How To Uninstall a Bathroom Faucet by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can lift the old faucet out you can use a putty knife to help break the seal. For single holeMoreYou can lift the old faucet out you can use a putty knife to help break the seal. For single hole mounts as well as three hole mounts with an escutcheon plate. The faucet should come right out.
How do you replace a faucet stem?
1:315:29Faucet stem repair and replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need to unscrew the top cap and pop out the stem. A few brass stems need to be removed thisMoreYou'll need to unscrew the top cap and pop out the stem. A few brass stems need to be removed this way as well.
How do you remove a Delta faucet handle with no set screws?
Some single-handle Delta® bathroom faucets come with a Push-Fit Handle that eliminates the need for a set screw to secure the handle to the faucet. To remove a Push-Fit Handle, align the handle with the spout and pull the handle straight away from the faucet body. If your handle is on top, you pull upward.
How do you remove a bathroom faucet cartridge?
1:272:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe set screw and loosen it by turning counterclockwise. With the set screw loose lift off theMoreThe set screw and loosen it by turning counterclockwise. With the set screw loose lift off the handle underneath you'll see a large valve nut loosen. It using an adjustable wrench and screw it off.
How do you replace a double handled faucet cartridge?
1:283:08How to Replace Leaky Cartridges in a 2 Handle Bathroom Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a crescent wrench to remove the bonnet nut from the cartridge. Next unscrew and remove theMoreUse a crescent wrench to remove the bonnet nut from the cartridge. Next unscrew and remove the cartridge. Now soak up the water in the faucet. Shank. Next install the new cartridges.
How do you remove the handle on a Delta 2 bathroom faucet?
1:032:43How To Uninstall a Bathroom Faucet by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can lift the old faucet out you can use a putty knife to help break the seal. For single holeMoreYou can lift the old faucet out you can use a putty knife to help break the seal. For single hole mounts as well as three hole mounts with an escutcheon plate. The faucet should come right out.
How do you remove a Delta faucet handle with no set screws?
Some single-handle Delta® bathroom faucets come with a Push-Fit Handle that eliminates the need for a set screw to secure the handle to the faucet. To remove a Push-Fit Handle, align the handle with the spout and pull the handle straight away from the faucet body. If your handle is on top, you pull upward.
Community Q&A
Include your email address to get a message when this question is answered.
Tips
Check if Delta’s warranty covers replacement parts. Gather up any receipts and product paperwork you might still have, then call or email Delta (find their contact info at https://www.deltafaucet.com/service-parts/contact-us ). Delta’s limited lifetime warranty may cover replacement parts.
About This Article
This article was written by Dave Jones and by wikiHow staff writer, Christopher M. Osborne, PhD. Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18.
How to access delta faucet cartridge?
To access the Delta faucet cartridge and seats & springs you’ll have to remove the faucet handle & body. Unscrew the delta faucet handle by hand and use an Allen wrench to loosen the set screw that holds the handle body in place. Then remove the faucet handle body and set it aside. Unscrew the stem unit nut with channel locks.
How to check if a faucet is leaking?
Turn the hot water shutoff valve under the sink to the off position (completely to the right). Check to see if the leak is still there. If the leak is gone you know the hot water side of the faucet is the culprit.
Can I put a new seat and spring down into a faucet?
I always put the new seat and spring down into the faucet together as one unit. Just make sure they’re oriented like in the picture below with the wider side of the spring facing down into the faucet.
Can you clean O rings on a cartridge?
As an FYI, one of my readers (Powell Svendsen) was able to clean the O-rings on the cartridge and eliminate a leak coming from the aerator. So you could give this a try before buying a new cartridge unit.
Can you go wrong with Delta faucets?
You can’t go wrong with Delta, Moen, or American Standard. There are so many awesome styles to choose from. Please let us all know which faucet you choose over on prettyhandygirl.com 🙂
Is it easy to save a plumber call?
Very easy and you’ll save a call to the plumber.
Does Delta bathroom faucet have a repair kit?
Wow, what nice tips you have here…the good thing about this Delta Bathroom Faucet is that it has a repair kit, so it is easy to fix it.
What does it mean when a Delta bathroom faucet leaks?
If your Delta bathroom faucet is leaking from the faucet spout, the faucet seats and springs are worn out. On the other hand if it is leaking from the base of the handle you have a bad stem assembly (double-handle faucet) or defective ball assembly (single-handle faucet).
Why is My Delta Bathroom Faucet Dripping?
Continued use of the faucets causes wear and tear resulting in leaks.
What to do if a faucet spout leaks?
Anyway, if the faucet is leaking from the spout, you will need to replace the seats and springs. Replace the stem assembly if the faucet is leaking from the base of the handle. You can as well replace everything especially if you haven’t done so in a long time.
How to unscrew a cap?
Unscrew the cap using the wrench or channel locks. This is the dome-shaped piece which holds the assembly in place.
Does Delta make single handle faucets?
Since Delta makes both single-handle and double-handle bathroom faucets, we will look at both, starting with the single-handle faucet. If you have a double-handle Delta bathroom faucet, scroll down to the next section.
Do faucets corrode?
Water quality also plays a big part in faucet parts’ longevity. If you live in area with hard water, your faucets are more likely to leak and/or corrode that faucets in areas with soft water.
What is a delta faucet?
Delta bathroom and kitchen faucets with two handles often are stem-style faucets that include a neoprene valve seat and spring that fits into the faucet below a cartridge-like insert stem. This is different from a true cartridge-style faucet, which closely resembles a stem faucet but does not have valve seats and springs.
How to tell if a faucet is leaking?
Determine Which Side Is Leaking. Place your hand under the drip from the faucet. If the water is warm, the leak is most likely on the hot side of the faucet. If the water is cold, the leak is most likely on the cold side. This tells you which is the better side to fix first, but it's possible that both sides are leaking in any case.
How to remove valve seat and spring?
Remove the seat and spring by inserting a small screwdriver or Allen wrench into the hole of the seat and pulling up both parts together. Note the spring's orientation inside the valve seat. The spring should be slightly larger in diameter at the bottom than at the top—where it fits into the seat.
How to replace a valve stem?
If desired, you can also replace the O-ring (which is sometimes included with stem-and-spring kits) or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing. Push the stem all the way down until it stops.
Where is the valve seat on a faucet?
Look inside the stem housing and locate the neoprene valve seat sitting in a hole at the bottom of the faucet housing. The valve seat is a small, black, rubber cap with a hole in the top. Sitting inside and below the seat is a small metal spring.
What to do if there is no water shut off valve?
If there are no shutoff valves under the sink, turn off the water to the entire house at the home's main shutoff valve, then turn on both sides of the faucet to relieve pressure in the supply lines.
Can you reinstall a faucet stem?
Note the position of the stem before removing it. You must reinstall it in exactly the same position for the faucet to work properly. Stems usually have one or more tabs that fit into notches in the stem housing to help you align the stem, but you can still get the stem backward. It might be helpful to take a photo of the stem for reference.
