Keep unwinding the spool back and forth throughout the flower bed space the tubing 12 inches apart. If necessary, join one length of tubing to another with a push-in coupling. When you get to the end of the layout, cut the tubing with a utility knife if necessary, flush it with water, fold it over, and slip on an end clamp.
How do you turn off the water to a sprinkler system?
Slowly open the main shutoff valve to let water into the sprinkler system. For a ball valve, turn the lever handle one-quarter turn until the handle is parallel to the pipe; this is the fully open position. For an in-ground shutoff valve, use a sprinkler valve key to turn the valve counterclockwise until it stops.
How do you open a ball valve on a sprinkler system?
Open the Main Valve. Slowly open the main shutoff valve to let water into the sprinkler system. For a ball valve, turn the lever handle one-quarter turn until the handle is parallel to the pipe; this is the fully open position.
How do you start a sprinkler system in the spring?
To start a sprinkler system in spring after it was winterized the previous fall, you must first know where the sprinkler system's main shutoff valve is located. In many systems, the valve is located outdoors, inside a long irrigation tube near the sprinkler control boxes. This kind of valve is operated with a special key tool.
Should I Turn Off my sprinkler system in winter?
During the winter, your lawn and garden may not need a sprinkler system, so it makes sense to turn it off. When the time comes in the spring, however, you'll need to turn it back on. With the sprinkler system working, your grass and flowers can get the water that they need to grow bright and lush.
How do you adjust a sprinkler that goes back and forth?
0:322:11How to Set up an Adjustable Circular Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipEach color adjusts the opposite side of the sprinkler. Move the back left collar to set the frontMoreEach color adjusts the opposite side of the sprinkler. Move the back left collar to set the front right spray area. And adjust the back right collar to change the front left spray.
How do I change the direction of my sprinkler system?
1:063:48Hunter Spray Adjustments and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther.MoreIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do I adjust my sprinklers from left to right?
1:173:28Rain Bird 5000 - Setting the Left Stop w/ Slip Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically what you're going to want to do is. Just turn your turn your sprinkler tight onto yourMoreBasically what you're going to want to do is. Just turn your turn your sprinkler tight onto your riser. And then basically what you're going to be able to do they come factory.
Why does my sprinkler not go back and forth?
Water Pressure or Water Volume If the water level is too low, the distribution bar on an oscillating sprinkler may be unable to move at all, or it may move very slowly to the end of the cycle, then be unable to move past the pivot that sends it back in the opposite direction.
How do I change the direction on my Rainbird sprinkler head?
1:161:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
What does the screw on a sprinkler head do?
This is even more common when garden owners have two different sprinkler heads watering the same section of lawn. Luckily, fixing these distance and angle errors is very straightforward as most sprinkler manufacturers have an adjustment screw that stops the water coming out from a pop-up head.
How do you adjust Rainbird 1800 sprinkler heads for direction and flow?
0:001:58Adjusting your Rainbird Turf Sprays (1800).mp4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe number on the nozzle 8-10-12 etc is the distance that it will throw to adjust these types ofMoreThe number on the nozzle 8-10-12 etc is the distance that it will throw to adjust these types of nozzles. Simply rotate the shaft until the spray is at the desired.
How do I get my sprinkler to oscillate?
SolutionsCheck for crimps and kinks in your hose and fix where necessary.Try opening your tap more to increase the amount of water flowing to your sprinkler.Try a different model oscillating sprinkler. It may be that the overall water pressure on your home system is too low.
How do I make a sprinkler oscillate?
0:342:11Oscillating Spray Area Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the spray pattern adjustment tabs to the desired position and adjusts the spray arm as needed.MoreSet the spray pattern adjustment tabs to the desired position and adjusts the spray arm as needed. With a tab spread as far apart as they can be your sprinkler will cover its maximum. Area.
How long should an oscillating sprinkler run?
Q. How long should you water the lawn with an oscillating sprinkler? Most oscillating sprinklers will produce about 1 inch of water per hour. At that rate, you should water your lawn for one hour, once a week, as most lawns need between 1 and 2 inches of water per week to stay healthy.
How much does it cost to relocate a sprinkler head?
On average, sprinkler head replacement costs between $65 and $90 to hire a professional, or $2 to $12 per head if you replace them yourself. The cost to install additional sprinkler heads is between $94 and $103. Replacing or relocating sprinkler heads for your entire lawn will cost about $400.
How do you adjust orbit rotating sprinkler heads?
0:013:37How to Adjust an Orbit Saturn III Gear Drive Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo until it locks in that's where you want to make adjustments from if you make it from anywhereMoreGo until it locks in that's where you want to make adjustments from if you make it from anywhere else it's not going to work right and you risk breaking some of the internal.
How long can a sprinkler system keep programming instructions?
Most modern sprinkler systems can retain programming instructions for years with or without power. This is possible because most control boxes contain a small amount of flash memory, which retains data about watering schedules. It is possible to clear this memory and reset the system.
Is it easier to reset an irrigation system?
Sometimes, resetting the system is easier than changing an entire irrigation program if you want to reduce the amount of water used or change the watering schedule. While there are many different types of controllers, Hunter and Toro are two of the largest manufacturers. Advertisement.
Calibrate Your Sprinkler
To calibrate your sprinkler (hose or in ground system) you need to determine how much water it delivers over a given time. Here is an easy way to do that:
Water Deeply
Use a rain/soak/rain pattern to water deeply. When you water you don’t want to water more than .25” in an hour because the soil just can’t absorb it and it will run off down the storm sewer wasting water and money. But we want to water .5” each time we water the lawn because that will wet the soil profile the full 8” deep.
Water Infrequently
With the sprinkler calibrated like we did in steps 1 and 2, we can set our schedule. We know we water .5” each day we water and we know the lawn needs 1-2 inches of water between rain and irrigation. We also know that we want the lawn to dry down between waterings to help promote healthy rooting.
How Do In-Ground Sprinkler Systems Work?
So how does an in-ground sprinkler system work? There are four primary components of a sprinkler system and what role they play.
What Are The Main Reasons My Sprinkler System Runs Twice?
There are a couple of reasons why your sprinkler system keeps running when it’s off or unplugged. Either someone has opened the valves manually, or there is debris in the valve. There are some simple steps to resolve these issues.
