how do i vent my dryer outside

1. Locate two studs behind your dryer with a stud finder.
2. Drill a pilot hole in the wall between the studs and look for electrical wiring or pipework that may be in the way.
3. Cut a 4 1/2-inch-wide circle with a jigsaw in the wall through both the inside and outside walls.
4. Insert the dryer exhaust vent cover through the outside wall.
5. Affix the vent cover to the exterior wall with four screws inserted into each of the four corner screw holes included on the vent cover.
6. Caulk around the vent cover to seal it from outside air.
7. Return inside the house and clamp one end of the dryer exhaust duct with a duct clamp around the end of the inner portion of the vent cover.
8. Connect the opposite end of the exhaust duct to the dryer vent outlet with the remaining duct clamp band.

Full Answer

How can I vent my dryer without outside access?

Required Tools for this Project

• Cordless drill
• Tape measure
• Tin snips

Is it time to replace your dryer vents?

Step 4: Use dryer vent kit to join the box vent to duct

• All that's left to do now is to join the box vent to the overhead duct with the vent kit.
• Start by attaching the lower flex vent to the periscope box vent.
• Secure the elbow with a band clamp.

How to repair or replace your dryer vent duct?

How to Replace a Dryer Vent Hose Inside a Wall

1. Unplug your dryer, and move it away from the wall and the existing dryer vent. ...
2. Remove the screws holding the plastic beauty ring to the wall around your original dryer vent. Pull the ring off the vent.
3. Check for spray foam insulation in the gap between the vent and the wall. ...

More items...

How do you repair a dryer vent?

Replace a Broken Dryer Vent Cap

• Replace a dryer vent cover. Cut the old caulk with a utility knife and pull out the outdoor vent covers from the outside. ...
• Video: Why You Should Upgrade Your Dryer Vent. Sorry, the video player failed to load.
• Required Tools for this Dryer Vent Cap Replacement Project. ...
• Required Materials for this Dryer Vent Cap Replacement Project. ...

Videos of How Do I Vent My Dryer Outsidebing.com/videos

Images of How Do I Vent My Dryer Outsidebing.com/images

Can you vent a dryer directly outside?

It's best to route the dryer vent in a horizontal path to the home's outside wall. All horizontal runs should pitch 1/4-inch per foot to the outside. This will help to avoid moisture from sitting in the pipe or draining back to the dryer.

Do you need a vent if your dryer is outside?

Because they emit carbon monoxide, gas dryers absolutely must vent to the outside. Ideally, electric dryers also should vent to the outdoors. Unfortunately, structural challenges and other issues sometimes make venting a dryer inside of the home seem easier and more appealing, and some landlords may require it.

What if I cant vent my dryer outside?

Install An Indoor Dryer Lint Trap Probably the most common way to vent a dryer without a vent to the outside is to use an indoor dryer lint trap. These lint traps are basically detachable filters that are installed at the end of the flex vent behind the dryer.

How much does it cost to have a dryer vented outside?

Cost of a New Dryer VentItemTotalVent Kit (transition duct, clamps, wall sleeve & indoor/outdoor vent)$10 - $30Total Materials Cost:$40 - $60Labor Cost:$40 - $140 (2-4 hours at $20-$25/hr)Total Project Cost:$80 - $2001 more row

Are ventless dryers worth it?

It is true that ventless dryers are easier to install, lower maintenance, and more efficient than vented dryers. However, non-vented dryers also tend to have a significantly higher upfront cost, and though they are gentler on clothes, they tend to take longer than a vented dryer to get everything dry.

Where does my dryer vent go?

Your dryer vent usually enters the laundry room wall and exits outside through an external wall.

How do you hook up a dryer vent to a tight space?

0:251:33The Best Way to Install a Dryer Vent in a Tight Space - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow it's time to take the measuring tape. And mark that distance against the adjustable dryer ventMoreNow it's time to take the measuring tape. And mark that distance against the adjustable dryer vent once you have your dryer pulled out attach your offset vent using the hose clamp to the dryer.

How do I vent my dryer in the middle of the house?

The optimal way to vent a dryer in the middle of your home without outside access is to run a vent hose through a window. Or you can run a vent hose up through your attic space to a dryer vent located on your roof.

How long does it take to install a dryer vent?

two to four hoursIf you're hiring a professional to install your dryer vent, expect to pay $20 to $35 per hour in labor costs. Most installations take two to four hours, for a total installation cost of $40 to $140.

What is code for dryer vent?

M1502. The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.

How can I hide my dryer hose?

Hide the Hose in Cabinets You can use a metal circular saw drill bit to easily cut through most cabinet materials. Cabinets are also a great solution for a dryer vent hose that runs lower next to your machine. Any cabinet or set of drawers can be used by cutting holes where necessary.