How do you advance a stihl trimmer? Hold the Stihl trimmer with your dominant hand on the trigger throttle and your other hand on the forward handle for... Press the trigger throttle to start the trimmer head turning. … Allow the line to feed from the trimmer head.
Full Answer
How do you use a Stihl auto cut Trimmer?
Stihl AutoCut and TrimCut Hold the Stihl trimmer with your dominant hand on the trigger throttle and your other hand on the forward handle for support. Press the trigger throttle to start the trimmer head turning. Allow the line to feed from the trimmer head.
How do you change the line on a Stihl weed wacker?
Continue cutting grass and weeds. Stop the Stihl weed wacker with the FixCut trimmer head installed. Move the operating switch to the "Off" position and allow the trimmer head to completely stop rotating before starting the line replacement. Pull any old trimmer line remaining in the FixCut head.
How do you turn the trimmer head on a mower?
Position the trimmer head just above the ground. Press the trigger throttle to start the trimmer head turning. Continue to hold the trigger throttle down and lower the trimmer head to bump the tap button on the bottom of the trimmer head on the ground. Allow the line to feed from the trimmer head.
How do I care for a Stihl FS 45 Trimmer?
Keep the string wound tightly on the Stihl FS 45 trimmer. The nylon string used in a Stihl FS 45 trimmer can wear out quickly if you use it over rough, rocky ground or around hard-edged objects. This line is wrapped around a spool that rests inside the trimmer head.
See more
How do you advance a trimmer line?
0:001:21Advance the Trimmer Line on an Electric Trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo before it gets to that point we're going to need to feed some more line out the way to advanceMoreSo before it gets to that point we're going to need to feed some more line out the way to advance more line is to while the trimmer is running tap it once on the ground.
How does the auto feed work on a string trimmer?
The Automatic Feed Spool (AFS) is the technologically advanced line feed system found on Black & Decker string trimmer products. Using centrifugal force, the system monitors the amount of line being used and feeds more line automatically as the cutting line shortens.
How does Stihl auto feed work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
Why does my trimmer line not feed?
0:051:22Top Reasons String Trimmer Line Not Feeding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head lineMoreThe trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head line that is too thick or too thin for the trimmer head won't feed properly.
What is automatic line advance system?
The automatic advancing mechanism works by sending out more line when the string gets too short. Importantly, if you have an automatic feed electric string trimmer, the last thing you're going to want to do is tap the head on the sidewalk because it will break it and negate your warranty.
What does auto feed mean?
Automatic feeding means feeding wherein the material or part being processed is placed within or removed from the point of operation by a meth- od or means not requiring action by an operator on each stroke of the press.
Why does my trimmer line run out so fast?
The most common reasons that a trimmer line keeps breaking include poor quality trimmer line, incorrect thickness of line, not being careful around hard surfaces and old line being used.
How do you use a Stihl speed feed head?
0:081:24How to Easily Load Speed Feed® Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou simply align the arrow on the knob with the eyelet. Then feed approximately 20 feet of trimmerMoreYou simply align the arrow on the knob with the eyelet. Then feed approximately 20 feet of trimmer line through the eyelet. Be sure to line up the two lengths to ensure an even feed.
What is Stihl comfort feature?
Professional anti-vibration system Thanks to its precisely calibrated anti-vibration system, the STIHL MS 261 C-M petrol chainsaw runs perceptibly smoother. The vibration level is just 3.5 m/s², meaning that the chainsaw is easier to handle - making your work less strenuous.
What is the cause of trimmer head not spinning?
0:051:30Top Reasons String Trimmer Head Not Spinning - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe drive shaft which connects the clutch to the trimmer head could be damaged as well a damagedMoreThe drive shaft which connects the clutch to the trimmer head could be damaged as well a damaged drive shaft will need to be replaced with a new. One. The trimmer head itself could be defective.
How do you feed a trimmer line?
0:121:28String Trimmer Line Installation Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the two holes on top of the inner reel. And insert both ends of the line into one of the holes.MoreFind the two holes on top of the inner reel. And insert both ends of the line into one of the holes. Pull. The line through. Until two to three inches. Remain.
How do I load automatic feed spool?
0:361:50How to Change the Automatic Feed Spool (AFS) line on Black & Decker ...YouTubeStart of suggested clipEnd of suggested clipHere's my brand new spool. Same size you want to remove the tape. Around the edges the tape holds.MoreHere's my brand new spool. Same size you want to remove the tape. Around the edges the tape holds. The line in place once in the packaging.
What is an auto feed head on a strimmer?
With an auto feed system, the trimmer will release more line whenever it starts to run short, based on an advanced internal system. The majority of models will have some kind of component that gauges the current length of the line and then releases more by taking advantage of the spinning taking place with the head.
How does Ryobi trimmer auto feed work?
0:000:32How To: Function Auto-Feed Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipReowww be trimmers with auto-feed heads advance the line each time the trigger is released.MoreReowww be trimmers with auto-feed heads advance the line each time the trigger is released.
How does Black and Decker easy feed work?
0:291:54How it Works: Line Feed Black+Decker 20V Cordless String ...YouTubeStart of suggested clipEnd of suggested clipUp it allows it to move and let's add an inch or so. So normally locked in place and then when itMoreUp it allows it to move and let's add an inch or so. So normally locked in place and then when it pushes up it will allow the line to move and send out about an inch or two of line.
How does the echo speed feed work?
1:304:15Why You Should Be Using the ECHO SpeedFeed Trimmer ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you feed it right through the trimmer head pull it out so that it's even and then you just turnMoreAnd you feed it right through the trimmer head pull it out so that it's even and then you just turn the trimmer head to wind up all of the string.
How to turn a Stihl trimmer head?
Position the trimmer head just above the ground. Press the trigger throttle to start the trimmer head turning. Continue to hold the trigger throttle down and lower the trimmer head to bump the tap button on the bottom ...
What is a Stihl weed wacker?
Stihl weed wackers feature trimmer heads that use nylon line to cut weeds and grass in hard to reach areas around a lawn or landscape. Stihl manufactures four models of trimmer heads including the SuperCut, AutoCut, FixCut and TrimCut. As the trimmer line is worn down during normal operation, advancing new trimmer line is accomplished by following a few basic steps based on the model of Stihl trimmer head.
How to get new line to feed from a spool?
Raise the trimmer head slightly off the ground as the cutting line is worn down to the point where 2 1/2 inches or less extends from the head. Hold the trimmer head above the ground, press the trigger throttle and allow new line to automatically feed from the spool.
How to cut a filler spool?
Use snips to cut the line from a filler spool. Insert one end of the line into the eyelet on one side of the trimmer head. Push the line in until you feel resistance. Insert one end of the other line into the eyelet on the opposite side of the trimmer head. Push the line until resistance is felt.
How To Troubleshoot the Stuck Trimmer Head?
Here we’ll describe how the trimmer’s different parts can be responsible for the head not spinning. And what you can do to solve this problem. So, let’s get started-
Frequently Asked Questions
Answer: Grab some pliers, squeeze the axle tightly, twist the cap and it’ll do the work.
Conclusion
So, which part of your Stihl trimmer is the reason your stihl trimmer head stuck? I hope our suggestions helped you to figure it out.
Step 1
Turn the FS 45 trimmer off and let the engine cool. Flip the trimmer engine down so you can work on the head.
Step 2
Hold the outer rim of the spool retainer. Push the center bump knob and turn it in the direction of the arrow on the cover. Pull out the spool retainer from the head. Remove any remaining old string.
Step 3
Cut off approximately 25 feet of new string, and fold the string in half. Insert one end in the hole on the inner reel. Pull the string all the way through until the loop at the end is as tight as you can make it.
Step 4
Hold the inner reel with one hand, and with the other begin winding the string around the reel. Place your thumb or finger between the two lines to keep them separated. Create flat, even rows while making sure that none of the layers crisscross or overlap.
Step 5
Stick the remaining 8 inches of string into the two notches on the inner reel's upper flange. Hold the inner reel while threading the two ends into the eyelets on the trimmer head.
Step 6
Push the inner reel down into the trimmer head. Place the cover back over the inner reel and secure it by turning it in the opposite direction.
