apply
- Find a flat surface (and an extra set of hands, if possible) and lay the graphic on it. Using Rapid Tac Application...
- Apply the vinyl to the wet surface, being careful NOT to stretch the vinyl excessively during its application.
How do you apply auto Pinstripe tape?
Decide how much of the tape to apply, peel off the adhesive, and gently (but firmly) press onto desired surface. It is extremely important not to stretch the auto pinstripe tape too much, or the ends of the tape will “pop” and not stick properly.
What is the best way to apply pinstripes?
There are three basic methods to apply pinstripes: mechanical pinstriping, stencil tape, and freehand pinstriping. Each requires different techniques and equipment. A mechanical pinstriper is the best method for striping long surfaces like trucks, vans or station wagons.
What size vinyl Pinstripe tape do I Need?
Pinstriping is an art. If you have a design in mind, an experienced pinstripe installer will be able to help you realize your design in real life with the correct type of pinstripe tape and application methods. The basic size vinyl pinstripe tape that you see on most new car lots are the 5/16" double line pinstripe.
How do you remove Pinstripe from vinyl siding?
The leftover adhesive will wipe off and leave behind a pinstripe free surface. Wax to Finish – Once that stubborn pinstripe is removed, apply some wax to the removal area. This will allow the area that was hidden under the vinyl to seamlessly blend into the surrounding paint.
How do you apply vinyl pinstripes?
1:025:42How to Apply: Vinyl Pinstripes By 1060 Graphics - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo once you have decided where your starting point will be peel back the vinyl and transfer tapeMoreTo once you have decided where your starting point will be peel back the vinyl and transfer tape away from the paper backing and lightly tack onto your surface.
How do you pinstripe for beginners?
0:045:37How to Pinstripe - Pinstriping for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipPressure makes it thicker and thinner so i'll show you what i mean so right now i put a littleMorePressure makes it thicker and thinner so i'll show you what i mean so right now i put a little pressure on it and it's going to be the heaviest.
How long does vinyl pinstripe last?
Once your pinstripe tape design is on your vehicle, it can last up to 10 years with extreme care, maybe longer. However, do note that high metallic colors are not as durable and tend to last 2 – 5 years.
How do I prepare my surface for pinstriping?
Before pinstriping, you must prep the surface. To remove any water soluble contaminants, you must thoroughly wash the substrate with detergent and water. Then to remove wax, grease, tar or other oil soluble contamination, prep the surface with a grease and wax remover.
How do you put a vinyl pinstripe on a car?
4:337:35Vinyl Pin Stripe Installation Instructions - How To - 1 - PinstripeYouTubeStart of suggested clipEnd of suggested clipWith the front part of the stripe pinched. We're now ready to remove the clear protective covering.MoreWith the front part of the stripe pinched. We're now ready to remove the clear protective covering. And trim the pinstripe. With a clear covering removed trim the front approximately.
What should I practice pinstriping on?
0:123:53How to pinstripe: "Practice Board Option" - YouTubeYouTubeStart of suggested clipEnd of suggested clipProbably the best thing about practicing on glass is that you can scrape off your design.MoreProbably the best thing about practicing on glass is that you can scrape off your design.
How much does it cost to put vinyl stripes on a car?
This option can cost as little as $25-$150 and you can easily apply them at home with a little bit of patience. If you choose to go painted racing stripes, you could end up paying as much as $600-$2,000 to have them done by a professional.
How much does it cost to put a pinstripe on a car?
If it's a standard 2 or 4-door vehicle, the cost could be anywhere around $50 - $100.
How do you install striped tape pins?
Decide how much of the tape to apply, peel off the adhesive, and gently (but firmly) press onto desired surface. It is extremely important not to stretch the auto pinstripe tape too much, or the ends of the tape will “pop” and not stick properly.
How do you hold a pinstripe brush?
To hold the brush correctly, place it between your thumb and index finger above the green wrapping on the brush called the ferrule. You will use your other finger as a bridge/guide to maintain a consistent distance on the painting surface/panel. Also, be sure to examine your brush – there's a flat and curved side.
How do you pinstripe a car with paint?
0:1411:15How to Pinstripe a Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo uh I'm gonna start by taking off the vehicle. And getting it and using the blue tape like I saidMoreSo uh I'm gonna start by taking off the vehicle. And getting it and using the blue tape like I said before because it shows up better than the green fine line plus on a white vehicle.
How do you use a pinstriping brush?
0:485:38Loading Pinstriping Brush - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then i start palating. And i go back and forth back and forth all the way down all the way downMoreAnd then i start palating. And i go back and forth back and forth all the way down all the way down i don't do. This. You want to make sure your hairs are covered. Now if your brush looks like this.
What kind of brush do you use for pinstriping?
The primary types of pinstriping brushes are sword brushes, dagger brushes, striping brushes, longliner brushes, and scriptliner brushes. Sword brushes are so named because the brush head resembles a sword, and are most commonly made from natural squirrel and used for pinstriping and scroll work.
How do you paint pin stripes?
7:5913:54How To Paint (Pinstripes and Decals) THE EASY WAY - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf we need to. So. Then once we have it on there. And then we can pull the strips out that we wantMoreIf we need to. So. Then once we have it on there. And then we can pull the strips out that we want you know we're we want the red paint to make the Pinstripe. Set.
How much does pinstriping a car cost?
If it's a standard 2 or 4-door vehicle, the cost could be anywhere around $50 - $100. We recommend using double-line pinstripe and size range from 3/16", 4'16" and 5/16". Boat striping can be a little more time consuming and at times, use large size vinyl. The minimum cost would start at $100 and go up from there.
How do you write a pinstripe letter?
0:415:04Roundhand Lettering Demo by Glen Weisgerber - YouTubeYouTubeStart of suggested clipEnd of suggested clipOh your downstrokes are thick all your upstrokes are thin up thin down thick snap to the right up.MoreOh your downstrokes are thick all your upstrokes are thin up thin down thick snap to the right up. Thin.
Environmental Conditions
First, check your surface temperature. To apply the graphic, the temperature of your surface should be 50 – 90 degrees Fahrenheit. And there’s good reason: Adhesive becomes brittle when it’s too cold, and gummy when it’s too hot.
PREPARE
Now, prepare a clean surface. No matter how clean we keep our cars, surfaces just get dirty. To ensure the best adhesion, it’s essential to clean the surface thoroughly prior to applying your graphic.
apply
We highly recommend using the Wet Application Method so you can remove and re-position your decal as needed for up to several minutes. Applying a vinyl graphic DRY does not allow for mistakes. Once the vinyl touches the surface, you cannot remove it without damage to the decal.
THE FINISHING TOUCHES
If your decal or pinstriping has gone over doors or panels, we recommend using the exacto knife to cut it, and then wrapping the remaining sections over the panel. To cut or trim a stripe or graphic, use a very sharp knife and very little pressure to avoid damaging the paint.
What is Pinstriping Tape?
Perhaps the most critical component of pinstriping is automotive pinstriping tape — a tough yet easy-to-apply tape that allows for pinstriping artists to create stand-out pinstriping designs — ensuring customization to be a breeze.
How hot does it have to be to apply pinstripe tape?
The process of applying the automotive pinstripe tape requires several steps: Take care to ensure the surface temperature of the vehicle does not exceed 65° Fahrenheit (18° Celsius). Many pinstriping manufacturers suggest applying tape indoors, where excessive heat is not an issue. Ensure the surface is extremely clean.
How long does pinstripe last?
When it comes to the issue of longevity, stripes have a minimum warranty of 5 years, with most lasting between 7 and 10 years before needing to be re-done or touched up in some detailed way.
How much does pinstriping tape cost?
The cost of pinstriping tape runs the price gamut, and should be factored into any pinstriping project, even though it will only set an artist back a few dollars on the low end — roughly about $2.99 — and upwards of $25 and over on the higher end, depending on length, type, and width.
How long is a roll of pinstriping tape?
Rolls of pinstriping tape vary in size, with standard rolls measuring at approximately 36 yards long. It’s possible to find smaller rolls for small, less detailed projects, as well as larger rolls sold in bulk, often from wholesale outlets.
What is custom tape?
Custom tape is what one would find in a big box store like Walmart or an automotive parts store. It is usually thicker than premium grade but it’s also easier to use — a big plus for pinstriping newbies. Professional pinstriping artists use premium tape.
What type of tape do you use for pinstripes?
The most popular type of auto pinstripe tape is vinyl — the sturdy mainstay for pinstripe artists everywhere.
What is the best way to remove paint from a pinstripe?
Denatured Rubbing Alcohol – You will use denatured rubbing alcohol in order to remove the paint on the pinstripe with a little bit of elbow grease and time. Towels – You will need paper towels to act as a vessel to let the alcohol soak on the pinstripe without unnecessarily getting on other areas of the vehicle.
How to remove pinstripes from car?
If you decide to do this project on a summer day, then this is easy for you! Park your car out in direct sunlight for about 30 minutes before you start the removal job. If it’s a cloudy day or in the middle of winter, it’s not a problem, just get out a heat gun or the family hair dryer and blast some heat onto the affected area with the pinstripes. Using heat makes the process much easier than if you tried to accomplish it without and also saves your paint from unnecessary roughness. Make sure to use safety precautions while using heat.
What removes pinstripes?
Goo Gone – An adhesive remover is a very important part of the process to remove pinstripes as it will take away any adhesive residue that has been left on the paint. Depending on the pinstripe you need to remove and the condition of the car, an adhesive remover can remove anything left behind.
How to get pinstripe off of paper?
Apply the Alcohol – Fold up paper towels saturated in denatured rubbing alcohol and apply them to the pinstripe with a paint-safe tape. Allow the alcohol to sit on the surface for 5-10 minutes before you remove the paper towels and start the next step.
What to do with pinstripes after they are removed?
Final Touch Ups – Once that unwanted pinstripe is removed for good, take some wax and show that area some love. This will allow the newly revealed area under the pinstripes to blend into the surrounding paint and create a seamless finish.
What is a 3M strip off wheel?
3M Stripe Off Wheel – 3M Stripe Off Wheel is an electric drill attachment that was created to remove anything that is stuck onto the surface of your vehicle including pinstripes on car surfaces. This product will be attached to an electric drill and will allow you to remove anything that is stubbornly stuck on to the paint job without removing the paint underneath resulting in a costly repair. It’s important that you use this device with care as if it is used incorrectly, it could result in damage to the car and the paint.
What is pinstripe in cars?
Pinstripes were a trend back in an earlier time and have no other purpose other than pure aesthetic value . If you don’t like the trend, you’re not alone–many car owners see them as flashy and only for a specific style. On modern cars, pinstripes are often no more than an inexpensive way for a car dealer to mark up the cost ...
How to apply pinstripe tape to a car?
First, you will want to locate the sticky side of the tape. This is obviously the side that will stick to the vehicle. You will want to start by only removing an inch or two of the backing for the sticky side of the tape. Once this is done, you will want to continue by applying the sticky side to the vehicle where the pinstripes will be located.
What is the best tape for auto pinstripes?
You can poll any number of artists you want and most of them will probably tell you that they prefer the vinyl auto pinstripe tape. This is by far the most popular choice because it is so sturdy. Vinyl pinstripe tape is incredibly strong, malleable, flexible, and can withstand some of the harshest weather conditions.
What happens if you don't use pinstripe tape?
If you don’t use the right pinstriping techniques then you are not only going to waste your time, but you are going to end up having to redo the project in the end or hiring someone else to do it. Not applying the stripes properly can make the overall job look bad as well as cutting the life of the stripes short. For instance, you might only end up getting 3 or 4 years out of your stripes when you could have gotten 6 or 7 years. Of course, pinstriping is not a skill that one can learn overnight and it will take some practice coupled with patience. Reviewing the right techniques and learning when and where to apply then will go a long way to contributing to your success.
What is marine grade tape?
Throughout your quest to find the perfect pinstriping tape, you will probably hear of another tape called marine grade tape. This simply refers to the strength of the tape. This is talking about the tape’s overall ability to withstand extremely harsh weather conditions.
How far away should you apply masking tape?
The first step of this process is to apply a layer of masking tape at least ¼-inch from where you want the line to be located. The tape is utilized as a visual guide to ensure better accuracy. Also not recommended for freehand striping is traditional masking tape.
How to remove paint from stencil?
The first step of the process involves applying the stencil tape. Once the stencil tape is in position, you will need to remove the kinks and air bubbles, which will leave small pockets for the paint to seep through. Inspect your work carefully before moving forward. The second step is to remove the release tape.
What is the second step of striping?
The second step of the process involves striping. You will need a steady hand to ensure perfection when striping. Once striping is complete, you will need to remove the masking tape. Now, you can stand back and admire your handy work.
Where is pinstripe tape placed?
Usually a pinstripe is placed on or near a major body line on the vehicle . Once you have selected placement and color, the next consideration is grade of the pinstripe tape. This will affect the final results; pinstriping tape that is highly stretchable and more durable makes for a finish that lasts longer.
How many yards of pinstriping tape is a roll?
Typically, a professional roll of pinstriping tape measures 50 yards, but you’ll be able to find shorter lengths on some products if your project is smaller. If you want to buy pinstripe tape in bulk, it’s possible to buy them wholesale. 2.The only limit to what you can do with pinstriping tape is your creativity. Pinstriping is an art.
How long does pinstripe tape last?
6.Pinstripe tape can last 7 – 10 years. Once your pinstripe tape design is on your vehicle, it can last up to 10 years with extreme care, maybe longer. However, do note that high metallic colors are not as durable and tend to last 2 – 5 years. The higher the metal flake content, the lower the longevity.
What is the best material for pinstripe tape?
The reason vinyl is the most popular: it is the most durable and malleable material for pinstripe tape. Chrome, gold and holographic pinstripe tape is made of polyester and will not last as long as high performance vinyl pinstriping.
Why is vinyl tape so popular?
The reason vinyl is the most popular: it is the most durable and malleable material for pinstripe tape.
What is pinstripe tape?
1.Pinstripe tape comes in a dazzling array of sizes, materials, colors and patterns. Whether it’s clean, simple lines or a flame design or if you want a metallic color, there’s a pinstripe tape for everyone! You can simply refer to a color chart or product guide for pinstripe design and you’ll be presented with numerous choices.
What are the two types of pinstripe tape?
4.There are two types of pinstripe tape: premium (high performance) and intermediate grade
What are the three methods of applying pinstripes?
We carry several colors (including pearlescents) of 1-Shot Paints so you can really let your imagination run wild! There are three basic methods to apply pinstripes: mechanical pinstriping, stencil tape, and freehand pinstriping.
How to load a pinstriping brush?
Loading a pinstriping brush (called palleting) is different than loading a standard paintbrush. Dip your brush into the paint and draw the brush across an old magazine page, rolling the handle between your fingers. Stray bristles will be held down by the paint, which will load evenly without air pockets.
What is the best striper for a truck?
A mechanical pinstriper is the best method for striping long surfaces like trucks, vans or station wagons. The chief advantage to a mechanical striper is that it puts down stripes of consistent width, letting you concentrate more on keeping the contour of the stripe aligned along your work surface. Eastwood carries the Beugler pinstriper and accessories, which are preferred by body shops and pinstripers for their high-quality construction and consistent operation. The easiest way to use a Beugler striper is to set up your stripe line using our Magnetic Pinstriping Strip. It adheres firmly to steel surfaces, forms mild curves, and has a center groove designed with the Beugler's guide arm in mind. The strip can also act as a guide for your hand.
How to freehand strip a car?
The easiest method for the freehand striping novice is to lay down a strip of masking tape about 1/4" from where you would like the line to be. Use the tape as a visual guide for your stripes. Do not use standard masking tape for edging pinstripes. Pinstriping paint will seep and bleed under the edge of standard masking tape. The pinstriping on your vehicle can be as plain or as fancy as your patience and level of skill allow.
How to put paint down on magnetic strip?
Move the striper along the magnetic strip evenly and fairly slowly. This ensures that the paint will be put down in a consistent depth along the length of the stripe. We recommend you first practice on some scrap sheet metal or newspaper.
What to do before striping a car?
Before you start, the vehicle surface must be absolutely clean—no grease, wax or polish. If it's not, you'll have paint adhesion problems with the stripe. Our PRE Painting Prep is a quick and easy way to make sure that the surface is as clean as it can be. Spray the area where you'll be striping and wipe with a clean, lint-free cloth. Now the surface is ready to stripe.
Who carries the Beugler pinstriper?
Eastwood carries the Beugler pinstriper and accessories, which are preferred by body shops and pinstripers for their high-quality construction and consistent operation. The easiest way to use a Beugler striper is to set up your stripe line using our Magnetic Pinstriping Strip.
