- | Assemble Tree Stand Set up the base. Balsam Hill’s included tree base folds out into an X-shape comprised of four legs. ...
- | Secure the Tree Insert the bottom section of the tree into the base then tighten the eyebolt completely. ...
- | Shape the Branches Open up the hinged branches and start to shape and fluff the branches. ...
- | Connect the Lights Connect the light plugs for non-Easy Plug™ trees, and make sure all of the lights are lit. Continue to fluff each section.
- | Attach the Top Section After shaping the treetop on the ground, place it on the tree. ...
- | Inspect the Tree Step back from time to time to make sure the lights are evenly distributed and that the tree branches are fluffed to your liking.
How do I light assembly my Balsam Hill tree?
Shape the middle section (s) of the tree in the same manner. Balsam Hill’s pre-lit trees are available in 2 light assembly types: Easy Plug™ trees (including Flip™ and Instant Evergreen™) and traditionally-lit trees.
How do you assemble a collapsed Christmas tree?
These trees are received in a collapsed form. To assemble, insert the center pole into the bottom section, pull up the foliage-covered frame to its full height, and then insert the top section. For pre-lit models, connect the light plugs into their corresponding sockets according to the supplied lighting diagram.
How do you hook up a pre lit Christmas tree?
For pre-lit models, connect the light plugs into their corresponding sockets according to the supplied lighting diagram. This type of tree has color-coded branches that need to be individually hooked to the center pole. Each branch can be shaped and fluffed before adding the next one.
How do you assemble a potted plant?
To assemble, insert the center pole into the bottom section, pull up the foliage-covered frame to its full height, and then insert the top section. For pre-lit models, connect the light plugs into their corresponding sockets according to the supplied lighting diagram.
Are Balsam Hill trees easy to set up?
The Balsam Hill Flip Tree is an expertly designed artificial Christmas tree that is easy to move, assemble, and store.
How do you connect Christmas tree sections?
2:094:55Setting Up your Pre-Lit Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the bottom section of the tree. Pull. And first into the stand. Be sure that tree pole restsMorePlace the bottom section of the tree. Pull. And first into the stand. Be sure that tree pole rests all the way through to the bottom of the stand tube tighten. The three triangular bolts.
How do you tighten a branch on a Balsam Hill tree?
0:000:40How to Fix a Sagging Branch on an Artificial Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first you go in and hold the wire firmly. And start to press up. So that's how you fix a saggingMoreSo first you go in and hold the wire firmly. And start to press up. So that's how you fix a sagging branch.
How do you assemble the bottom of a Christmas tree?
4:145:49How to set up an artificial christmas tree - Bellacor.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it right in. And here you'll see we have another cord coming out of the bottom. This cord isMoreSlide it right in. And here you'll see we have another cord coming out of the bottom. This cord is labeled section 2 and our label 2 and it's going to plug. In to the spot that has a 2 on it on.
What is Balsam Hill easy plug?
What is an Easy Plug Christmas Tree? An Easy Plug Christmas tree is an exclusive Balsam Hill product which features pre-made light connections within the tree trunk. Our patented Easy Plug technology makes lighting your tree as simple as plugging it into the wall socket.
How do you put a plastic tree stand together?
0:151:15How to Assemble the Treestand for an Artificial Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhere basically you can kind of move back the pieces. And then after you have it closed there youMoreWhere basically you can kind of move back the pieces. And then after you have it closed there you can basically fix velcro. Button stitch it back together again.
How do you fix droopy tree branches?
Pruning and bracing are both effective methods for correcting drooping tree branches. Removing the branch entirely or contracting professional help may be required for rotting, heavily broken or extremely large drooping limbs.
Why is my artificial Christmas tree wobbly?
Especially an artificial tree that has been used for several years, as the screws in the stand start to loosen. Or if your tree is placed on an uneven surface, the tree stand wobbles, and your tree may lean precariously to one side or the other.
How do you adjust branches of an artificial tree?
0:011:01Quick Tips: How to Shape an Artificial Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe branches out in a clockwise fashion concealing the plug pull and cords as best you can work yourMoreThe branches out in a clockwise fashion concealing the plug pull and cords as best you can work your way around the tree shape and fluff each row of limbs on all sides.
How do you set up a hinged Christmas tree?
0:094:02Assembling and shaping hinged Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipCarefully place Section A into the stand then secure firmly with the screws. And allowing the bottomMoreCarefully place Section A into the stand then secure firmly with the screws. And allowing the bottom branches to fall down. Now. Start from the center Pole pulling. The center tips vertically.
How do you put a big Christmas tree together?
0:221:53How to assemble a Christmas tree which features 'Memory Wire'YouTubeStart of suggested clipEnd of suggested clipThe branches are made of a strong Steel memory wire which will spring back into shape year afterMoreThe branches are made of a strong Steel memory wire which will spring back into shape year after year take the base out of the box. And open it out so the holes line up place the screws in the holes.
How do you anchor an artificial Christmas tree?
So what's the best way of anchoring it? You can secure your artificial Christmas tree outside using shepherd's hooks, ratchet straps, rope or tie straps, an outdoor umbrella stand full of water, bags of rocks or dumbbell weights, or fence post bases.
What is a quick connect tree?
0:070:40How to Set Up a Quick Connect Artificial Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuick-set trees come in a variety of sizes and feature an innovative design that integrates theMoreQuick-set trees come in a variety of sizes and feature an innovative design that integrates the electrical cord right into the trunk of the tree.
How do you connect the lights on a pre lit Xmas tree?
Insert the middle section of the tree into the bottom section. Line up any grooves, arrows or markings on the two sections that help you align the plugs with each other. If none are indicated, turn the middle section to line up the plug for its lights with the extension cord outlet at the top of the lower section.
How do you connect Christmas tree lights?
0:271:44Christmas Tree Lights- Connecting Them safely - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's the trick. You either need to plug. In your Christmas tree lights very similar howeverMoreSo here's the trick. You either need to plug. In your Christmas tree lights very similar however humans. And you can see as they go one by one.
How do I add branches to my artificial Christmas tree?
0:181:19How to Add Big Branches to an Artificial Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you're going to do is you're going to fit this metal piece into the slot on your main trunkMoreAnd what you're going to do is you're going to fit this metal piece into the slot on your main trunk. You're going to make sure it's firmly in there so you don't you have some wiggling.
How to add dimension to a tree?
To add dimension to the tree and cover any gaps, place large baubles deep into the tree to act as a backdrop or filler. Shiny or iridescent balls help achieve depth and fullness. Don't hesitate to reshape branches to make room for the balls. Proceed to hang smaller, textured or intricate ornaments on the tips.
How should a tree tip be angled?
4. For most tree styles, the tips closest to the center pole should be angled upwards to give the tree a full appearance. The tips farthest from the center poles should be angled diagonally away from the branch.
What is a rolling tree stand?
Rolling stands, such as the Balsam Hill Tree Stand with Wheels, are equipped with wheels that allow the tree to be moved easily. The wheels can be locked in place to keep it from sliding.
What to use to reinforce ribbon topper?
Pipe cleaners can be used to reinforce support for the ribbon topper. For heavy tree toppers, we recommend using fasteners, such as the Balsam Hill Tree Topper Extension Kit, to give it more stability. For more information on how to choose the perfect tree topper, please read this article.
What to do if you have a broken light bulb in a tree?
For pre-lit trees, examine the tree sections to ensure that there is no cut or frayed wire insulation, exposed wiring, loose connections, or cracks in the light bases. If there are cracked or missing bulbs, replace them by following the tree manufacturer's instructions for that particular make and model.
What to know before buying a Christmas tree?
Before purchasing a new Christmas tree, measure the selected space to ensure the tree will fit properly. A tree that is too large looks cramped, and may block natural pathways and entryways. For detailed instructions on how to measure an area for a tree, please refer to our article on Christmas tree measurements.
Can you replace a master bulb in Balsam Hill?
In older trees, the master bulb cannot be replaced, making it necessary to replace the entire strand. However, Balsam Hill's trees from 2013 and on feature replaceable master bulbs, identified with a gray base. Now, if a master bulb goes out , it can be simply replaced with a new masterbulb.
How to bring a balsam hill tree to life?
Bring your tree to life by fluffing it. This includes stretching out the branches to fill any gaps and to give the tree its full form. Your Balsam Hill Flip Tree is now ready for decorating.
What is a balsam hill flip tree?
The Balsam Hill Flip Tree is expertly designed with a patented construction that makes it easy to move, assemble, collapse, and store.
How to flip a tree with a pole?
Flip the tree by placing one or both hands on the top of the flip pole and pulling in the direction of the arrow towards you . Place one foot on the horizontal bar on the stand to make the tree stable while flipping. Lock the tree into place using the safety strap at the base, then plug in the lights to ensure they’re all working.
How to flip a tree without being caught by branches?
Step down on the front wheels to lock the brakes. Find the flip path indicator arrow on the top of the flip pole to figure out which direction the tree’s bottom section flips. Clear the flip path by pushing the branches to the left or right of the tree trunk. Make sure that there’s enough room for the moving section to flip without being caught by branches.
What are the two main sections of a flip tree?
Flip Trees come with two main sections: a base attached to a rolling stand and the treetop. Depending on the height of your tree, the treetop may come in two sections. WATCH THIS INTERVIEW WITH BALSAM HILL FLIP TREE’S INVENTOR.
How to connect a tree light to a tree trunk?
Take the tree’s top section out from its individual storage bag. Insert it into the pole of the tree base. The Easy Plug function automatically connects the light strings through the tree trunk. You only need to touch one light string during setup: the one you plug into the wall.
Does Balsam Hill have a Christmas tree?
With Balsam Hill’s folding Christmas tree, you can enjoy the convenience of easy setup and takedown in a few simple steps.
How many legs does Balsam Hill have?
Set up the base. Balsam Hill’s included tree base folds out into an X-shape comprised of four legs. Turn the eyebolt into the stand just enough to ensure the legs cannot fold back together.
How long does it take to shape a tree?
To make setting up the tree easier, we recommend asking family and friends to help, since it can take around two hours to set up and shape a tree for the first time.
Can you force a tree pole into a tree?
Be sure the poles are properly aligned when assembling your tree. Do not force the poles into the tree sections, or disassembly will be difficult. A lubricant, like silicone spray, can be used to make this process easier. If a pole is bent or damaged, please contact Customer Service.
Do pre-lit trees come with connectors?
Note that the top section of our pre-lit trees comes with an extra end connector in case you need to plug in a lighted tree topper.
Do balsam hill trees have lights?
All Balsam Hill™ trees use hinged branches that are already pre-attached to the center pole — no longer requiring you to attach the pieces individually to the trunk .
How do I assemble my Balsam Hill tree?
Congratulations on purchasing your new tree from Balsam Hill™! Please review assembly instructions carefully to help you quickly and easily set up your new tree.
How should I shape my Balsam Hill tree?
When you unbox your new Balsam Hill Christmas tree, you will notice that each section of branches has been compressed for shipping purposes. To make the tree look as full as possible, you will need to shape, or “fluff,” its branches.
How should I store my Balsam Hill tree?
To retain the beauty of your Balsam Hill™ tree and prevent any damage during storage, make sure that all of the tree sections are stored properly, and kept out of the way, in a cool, dry place.
Troubleshooting Common Issues
For common issues that occur during set up or usage of tree, please read more.
Assembling Your Tree Lights
Balsam Hill's pre-lit trees are available in 2 light assembly types. Easy Plug™ trees and traditionally-lit trees. For more information please read more.
