Install the New Kitchen Faucet
- Step 1: Set the Deck Plate. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set...
- Step 2: Feed in the Lines.
- Step 3: Affix the Hardware Under the Sink.
- Step 4: Set Up the Pull-Down Faucet.
- Step 5: Connect the Lines.
- Step 6: Check for Leaks.
- Step 7: Clear the Lines.
- Step 8: Replace the Aerator.
How do you install a new kitchen faucet?
Now that you've removed the old faucet, it's time to install the new one. Because all faucets are different, refer to the manufacturer's installation instructions. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate.
How to install a pull down kitchen faucet?
Install the New Kitchen Faucet 1 Set the Deck Plate. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate. 2 Feed in the Lines 3 Affix the Hardware Under the Sink 4 Set Up the Pull-Down Faucet 5 Connect the Lines 6 Check for Leaks 7 Clear the Lines 8 Replace the Aerator
How to reassemble a faucet aerator?
How to Reassemble a Faucet Aerator. 1 Step 1 - Gather the Pieces Together. Before you start assembling the pieces of the aerator, make sure that you have them all on hand. You should have ... 2 Step 2 - Start with Metal Pieces. 3 Step 3 - Add Air-water Mixer. 4 Step 4 - Place the Rubber Washer In. 5 Step 5 - Fit Back on the Faucet.
How to replace a kitchen sink faucet?
Remove the Old Faucet 1 Turn Off the Water and Electric. Turn off the water valves under the sink. Turn on the faucet to relieve pressure in the lines. ... 2 Take a Picture 3 Disconnect the Supply Lines 4 Detach the Faucet 5 Clean Up. Now that you've removed the old faucet, it's time to install the new one. ...
How do you put together a faucet?
0:281:53Step-by-Step Faucet Aerator Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd a rag for easy installation. Begin by unscrewing the old faucet aerator from the faucet byMoreAnd a rag for easy installation. Begin by unscrewing the old faucet aerator from the faucet by turning it counterclockwise. Now using an old toothbrush. And rag clean. And dry the threaded.
How do you assemble a kitchen faucet?
1:332:29How to Replace a Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd position the faucet underneath install the nuts and mounting bracket. For pull down faucetsMoreAnd position the faucet underneath install the nuts and mounting bracket. For pull down faucets attach the weight and quick connect hose to the supply. Pipe.
How do you put a sink faucet back together?
0:042:07How to Replace & Assemble a Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay when we placing a kitchen faucet one of the tools that's going to make things a little easierMoreOkay when we placing a kitchen faucet one of the tools that's going to make things a little easier for you is a basin wrench this will allow you to reach up behind the kitchen sink.
What are the parts of a faucet?
About Faucet PartsStems and cartridges.Faucet handles.Valve trim.Bathtub spouts.Showerheads and hand showers.Shower arms and wall mounts.Faucet hardware.Gaskets and O-rings.More items...
How do I fix a single handle kitchen faucet?
0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You will need to remove the single lever handle. This may require using an allen wrench to loosen the hammer.
How do you install a one handle kitchen faucet?
1:003:03How to Install a Single Handle Kitchen Faucet - Plumbersstock.comYouTubeStart of suggested clipEnd of suggested clipSupport insert the faucet through the mounting hole in the countertop. Now take the mounting bracketMoreSupport insert the faucet through the mounting hole in the countertop. Now take the mounting bracket and slide the hole over the shank.
How do you change a faucet head?
1:312:41How to Replace a Faucet Aerator | Repair and Replace - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlong with the rubber. Gasket. If the gasket sticks inside the faucet. Use the needle nose pliers toMoreAlong with the rubber. Gasket. If the gasket sticks inside the faucet. Use the needle nose pliers to pull it. Out. Now pop the new aerator into the original housing and place the new gasket on top.
How do you install a faucet nozzle?
0:071:10How to install a faucet aerator | FortisBC - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure the supplied rubber washer is in place carefully screw the aerator on to the threadedMoreMaking sure the supplied rubber washer is in place carefully screw the aerator on to the threaded spout end clockwise. And tighten by hand. Now. You can let the savings flow.
How do I install a new faucet head?
0:061:02How to Install a Faucet Aerator - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst take off the old faucet. Area wipe off any residue with the old cloth from the faucet ratMoreFirst take off the old faucet. Area wipe off any residue with the old cloth from the faucet rat teflon tape clockwise around the threads of the new aerator.
What holds a faucet in place?
A locking nut or screws keeps a faucet firmly attached to the sink. Locate this nut and use the basin wrench to loosen and unscrew it. This nut can prove difficult to remove, depending on how long the old faucet has been in use.
How do I identify my faucet parts?
0:063:20Quick Ways to Identify the Brand and Manufacturer for Faucet RepairYouTubeStart of suggested clipEnd of suggested clipAnother quick tip is to look underneath the sink because sometimes you might be able to find a labelMoreAnother quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
How many parts are in a faucet?
The 16 Parts of a Kitchen Faucet (Anatomy Diagram) Here's a detailed diagram showing the parts of a kitchen faucet above and below the counter.
How do you fix a dripping kitchen faucet with two handles?
0:424:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with aMoreOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with a Philips head screwdriver. So that the stem is visible.
How do I tighten the nut under the kitchen sink faucet?
2:374:21Tightening a loose kitchen faucet with the Rigid Sink Wrench - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis into the hose. That the pull out hose and follow it up until you feel it tighten. Until youMoreThis into the hose. That the pull out hose and follow it up until you feel it tighten. Until you feel that latch onto the nut.
How do I fix a dripping faucet?
1:532:53How to fix a pull-down kitchen faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you make sure that there's nothing obstructing this kind of movement under here with this hoseMoreFirst you make sure that there's nothing obstructing this kind of movement under here with this hose. And then you just slide the counterweight. Up closer towards the faucet. Head.
How do you remove a kitchen faucet from the top?
0:533:06How to Remove a Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the adjustable wrench to unscrew the connections by turning them counterclockwise. OnceMoreUse the adjustable wrench to unscrew the connections by turning them counterclockwise. Once everything is loose you can do the rest of it by hand next depending on the type of faucet you are removing.
How do I fix a leaky kitchen faucet?
Special plumber's tools aren't required, just a few basic tools you may already own. Have a small bucket to catch residue water and a plastic drop sheet to keep the bottom of the cabinet dry in case of a leak or spill. Choose a faucet from the hardware store, and follow the manufacturer's instructions.
How many nuts should I use for a sink faucet?
These are usually under the sink and directly below where the faucet meets the counter. There should be between 1-3 nuts and they will usually look less like a traditional nut and more like a target or clock. A basin wrench will make this job much easier. ...
Where is the shut off valve located?
The shut off valves are located below the sink. They are usually oval-shaped and found somewhere below the supply line for the tap. Turn them (very gently) clockwise to shut off the water. If a valve seems excessively tight, it may need to be replaced. Check the condition of the supply lines for leaks or obvious wear.
Can I replace a faucet at the same time?
Check the condition of the supply lines for leaks or obvious wear. You may want to replace these at the same time you replace the faucet. Most new faucets come fully assembled, some even with inlet hoses attached. Check with the clerk at the hardware store to be sure.
How to turn off water to faucet?
Turn off water to the faucet by turning the valve under the sink clockwise. LightWaveMedia / Shutterstock.com. Place a towel in the sink to prevent scratches and to catch any dropped parts. Then remove the handle. To do this, use a small, flat screwdriver to pry up the decorative cap, button, or plug at the top of the handle, used to hide a screw.
What is a ball faucet?
Ball-Style Faucet. Ball faucets have a single lever that operates a rotating, slotted metal ball. The slots in this ball align with hot and cold water inlet seats in the faucet body to regulate the amount of incoming water allowed to reach the mixing spout. Delta is one of the primary manufacturers of this faucet type.
What is a cartridge faucet?
Cartridge Faucet. Cartridge faucets have a hollow metal or plastic cartridge insert that seals against the spout or faucet body. Depending on how a series of holes in the cartridge align with the stem, water is mixed and controlled. Drips usually mean the cartridge needs replacing.
How to change water temperature on a water cartridge?
Water flow is controlled by an up-and-down movement of the cartridge; to change water temperature, you just rotate the handle. Remove the decorative can and screw and pull off the handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out.
What is the problem with a compression faucet?
The fundamental problem with a compression faucet is that the rubber washer or seal wears out over time. When this happens, the tap drips or drools. Some newer types of compression faucets lower and raise the washer without grinding it into the valve seat.
Why should the handle be on when repairing a disc faucet?
The handle should be in the “on” position when repairing a disc faucet to prevent cracking the replacement seals.
What is compression style faucet?
Compression-Style Faucet. Among the various faucet tap technologies in use, compression-style faucets have been around the longest. They are also the least expensive type. Compression faucets have two separate handles.
What happens if you don't put the aerator back on the faucet?
If you don't place the pieces back in the device in the correct order, you may have some trouble fitting them all together, or you may find that the aerator won't fit back on the faucet properly. It is also likely that the aerator will not work in the way it was designed if it's not reassembled properly. This is not a difficult task ...
How to make a water aerator?
Before you start assembling the pieces of the aerator, make sure that you have them all on hand. You should have the metal cap which connects the aerator to the faucet, the metal screen, the plastic screen, a small piece that mixes air into the water, and the rubber washer.
How to clean a faucet aerator?
If the water from your faucet has turned from a fast flow to a trickle, then it is time to clean it out. A simple clean requires a soak in vinegar. Use an old toothbrush to scrub the vinegar into the aerator. Rinse, dry and put it back in place.
Where are aerators located on a faucet?
Some faucets have aerators in the base of the fixture. Follow the manufacturer's directions for the specific faucet that you own. Aerators at the base may require a flathead screwdriver to remove any screws or aid in removing the clip that holds it in place. Clean with vinegar and return to the aerator housing.
What is an aerator in a faucet?
The wire mesh of the aerator combines water and air that reduces the overall flow from the faucet. The aerator breaks up the flow from the main line into smaller streams to reduce the amount of water flowing from the tap without reducing the pressure. The aerator also traps hard water impurities in the water. Tap water naturally contains minerals.
Can you reassemble a faucet aerator?
You can reassemble a faucet aerator. The faucet aerator can go unnoticed and get clogged with hard water deposits and other gunk. Cleaning out the sink faucet's aerator on a regular basis can keep the fixture in good working order. It can also be an intimidating endeavor for even a seasoned do-it-yourselfer.
