The most common method for installing tongue and groove ceilings is with a nail gun, fastening each board to every ceiling joist with 2 nails shot into the joist at slightly opposing angles. If you’re planning to install your own ceiling, you’ll need a few tools.
How much cost is installing tongue and groove boards?
Tongue and groove typically costs between $1.25 — $1.60 per linear foot, or around $2.50 to $3.00 per square foot. Some wood species, like cedar, will cost you way more than yellow pine or spruce.
Can you put tongue and groove on to concrete floor?
Unlike hardwood flooring, engineered flooring can be installed over concrete or existing flooring, such as tile or linoleum. Although tongue and groove solid hardwood flooring does fit together, it must still be nailed to a subfloor.
How to install Tongue Groove porch floor board?
How to Install Tongue and Groove Porch Flooring
- Priming. At first, lay the planks facing down across the porch. ...
- Measurement. Measure the first plank such that it is perpendicular across the joists on the porch. ...
- Nailing. Once the planks are cut to appropriate sizes, set all the plank in place, with the grooved side facing the house.
- Layering. ...
- Priming. ...
How to install string light on your ceilings?
Method 1 Method 1 of 3: Making a Zig-Zag Pattern Download Article
- Measure your room and choose how far apart to space your lights. ...
- Hang the first hook from your ceiling near the outlet you’re using. ...
- Space the hooks along the edge of your ceiling. ...
- Offset the hooks on the other wall by half the distance between your hooks. ...
- String the lights tightly between the hooks. ...
How do you fasten tongue and groove ceiling?
Drive the nails through the shoulder of the tongues into the framing at about a 45-degree angle. The next grooved edge will hide the nail holes. A 15- or 16-gauge brad nailer with 2-in. nails is the best choice for fastening, although an 18-gauge nailer will do the job, too.
How do you nail up tongue and groove?
1:416:18Tongue and Groove Accent Wall - Part 3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipI put that nail gun flat. And I shoot a nail through it what's going end up happening is on theMoreI put that nail gun flat. And I shoot a nail through it what's going end up happening is on the other side of this board on the other side of this groove here that nail is going to be sticking out.
How do you nail a tongue and groove pine ceiling?
2:187:14How to install Tongue and Groove Pine on the Ceiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipObviously we did this side first but over here you basically start at the bottom with your groove onMoreObviously we did this side first but over here you basically start at the bottom with your groove on the bottom tongue at the top put it all the way over and run it over to a joist now.
How do you screw tongue-and-groove?
1:444:26How to Install Wood Floors with Tongue & Groove (Hidden) ScrewsYouTubeStart of suggested clipEnd of suggested clipStart the screw driver slowly. Because the screw has a little almost like a sort of drill drill bitMoreStart the screw driver slowly. Because the screw has a little almost like a sort of drill drill bit at the end of it too to start it off in the in the floorboard.
How far apart do you nail tongue-and-groove?
The nail spacing schedule varies by board type but you always nail down the ends of each board and space nails between 6, 8, or 10 inches apart.
Which side of tongue and groove faces out?
The smooth side should be fitted so it faces outward. Check your planks before you install them. Make sure the rough side is against the wall, ceiling, or floor. This will give a more professional finish.Installing Tongue and Groove Planks: Beginner Mistakes - Roman Rockhttps://www.romanrock.com › installing-tongue-and-groo...https://www.romanrock.com › installing-tongue-and-groo...Search for: Which side of tongue and groove faces out?
Do you stain tongue and groove before or after installation?
Tongue-and groove-ceilings must be stained before installation for best results. If, however, the builder hung the roof without staining it first, finish the ceiling in the method suggested in the tips section. Then you'll have to touch up the unstained portions of the tongue as they become exposed over time.How to Finish a Tongue & Groove Ceiling | eHowhttps://www.ehow.com › how_6306802_finish-tongue-gr...https://www.ehow.com › how_6306802_finish-tongue-gr...Search for: Do you stain tongue and groove before or after installation?
Which way should tongue and groove be installed?
Which side is the tongue, which the groove, and which goes first during installation? The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.Tongue or Groove? Which to Install First | swisskrono.comhttps://www.swisskrono.com › us-en › installing › articleshttps://www.swisskrono.com › us-en › installing › articlesSearch for: Which way should tongue and groove be installed?
How do you nail 1x6 tongue and groove?
4:1215:40How to Install Tongue and Groove Ceiling Boards - WindsorONEYouTubeStart of suggested clipEnd of suggested clipPattern. We want to be at an angle like that in that tongue. So we don't want to be in thisMorePattern. We want to be at an angle like that in that tongue. So we don't want to be in this chamfered edge right here. That's obviously not going to be a blind nail. We want to hide it in the tongue.
How do you secret nail a pine lining board?
2:243:57How to Do Blind Nailing - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking certain that you know you bury that now with that Nelson. So it doesn't interfere. Then youMoreMaking certain that you know you bury that now with that Nelson. So it doesn't interfere. Then you take your next piece your groove side and you slide it right in slide it into place.
How do you nail a 2x6 tongue and groove?
2:045:04Installing 2x6 Tongue & Groove Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard. Place it into the channel in this case the window is arched. So the board's going to kind ofMoreBoard. Place it into the channel in this case the window is arched. So the board's going to kind of go in at an angle. And you're going to slide your first board all the way. Over.
How to measure a room for wood paneling?
To get your room measured up, start by determining the length and height of each wall, and the ceiling if you’ll also be installing wood paneling there. Height x Length = total surface area, which will help you to order the right quantity of paneling to get the job done.
Can you put barn wood on the ceiling?
While you’re installing rustic panel ing or reclaim ed barn wood panels on your ceiling, make sure that you compress any insulation so that you’re not left with material coming through your tongue and groove panel ing, or interfering with your seams.
Can tongue and groove paneling be installed on studs?
As each section of tongue and groove wall paneling is installed, don’t worry about stud/rafters overrun. Secure sections with a nail on the tongue, and simply slide in the next cut when you need one. If it doesn’t line up to the stud/rafters, the end matching ensures that you won’t have any problems.
Can you put barn wood paneling over drywall?
Installation times are reduced compared to older paneling, and you’ll be left with walls that are near-seamless, looking as if you’ve had a professional out for installation.
Is tongue and groove wall installation quick?
Once you start to get into the rhythm of installing your tongue and groove walls, you’ll find that the process is extremely quick, even for relatively large rooms.
Can you install tongue and groove wood paneling?
Despite the huge and noticeable improvement to a room, installing tongue and groove wood paneling for walls and ceilings is one of the simplest DIY jobs for your home. Browse our range today for the best barn wood interior panels for home, or panels in any finish that will meet your design needs, and contact us if you need any wood paneling installation tips.
How to nail tongues in ceiling?
You want the nails to be gunned at a 45-degree angle. When nailing the tongues, make sure that you’re nailing them through the batten. Then, fit the groove over the tongue and beat it in. A lot of ceiling installers use their nail gun for this, especially if they’re in a hurry. Others use hammers.
What is a tongue and groove vaulted ceiling?
Of course, there are different types of vaulted ceilings. One of the more popular is called a “tongue and groove” vaul ted ceiling. If you’re debating installing this ceiling, it’s a good idea to know what you’re in for.
What is the cheapest ceiling finish?
Drop ceilings are considered to be the cheapest ceiling finishing method on the market. They are also known for being good for rooms with piping or HVAC equipment. As a result, it’s usually used as a bargain option in areas where you may need quick and easy access to piping.
What to do if you can't fit tongue?
If you can’t fit the tongue over the last groove, just use a hammer to break off the groove flanges and nail them down.
How to get authentic look on ceiling?
Others use hammers. Start working on your panels. To get a more authentic look, stagger the butt joints so you have a slightly randomized look to your ceiling. When working with your panels, make sure to hammer in any open joints you see.
Can you do tongue and groove ceiling on your own?
Then, you’ll need to afford space for new cutouts, get rid of extra tongues that don’t fit your home, and also just clean up any areas that don’t fit appropriately. Most people choose to get a tongue and groove vaulted ceiling installed by a professional, but it’s possible to do on your own.
Can you do tongue and groove on your own?
Most people choose to get a tongue and groove vaulted ceiling installed by a professional, but it’s possible to do on your own . This article will help you figure out whether or not it’s the right move for you.
How to do tongue and groove planks?
On each end of a tongue and groove plank, there will be a lower lip on the board to the left and an upper lip on the board to the right. Push these together flush as you work from left to right. Once you move to your next row, use a shorter first plank than on the previous row in order to give it a staggered effect.
How to nail a plank?
Feed the tongue side of a plank into the groove and push flush, then nail into place. For subsequent planks, first push the tongue and groove edge into place, then slide the lips together on the ends. Finish this row shy of where the previous row finished. Continue until you can no longer make anymore rows with full planks.
How to make a plank board?
Start with nailing a row of planks until you can no longer fit a full plank, inserting the lips of each board together as you go. Start the next row using a shorter board than you started the last row with. Insert the tongue of the board into the groove of the board already nailed in, then nail into place.
Can you use cedar planks on popcorn ceilings?
A cedar ceiling will always be beautiful, but we used these planks to cover a popcorn ceiling!
Do cedar planks make the ceiling look higher?
But somehow, the cedar planks make the ceiling feel higher and brighter. They REALLY freshen up the outdated popcorn texture. But, they also add their own texture, color, and interest with the cedar. We recently hung a coffered ceiling in our nursery, also to cover up popcorn.
Why do we bevele the edges of boards?
We beveled the edges of our boards to create perfect corners instead of boards bumping end to end. Then we caulked the seams.
Do you need to stain a cedar ceiling?
You do not need to stain or seal a cedar ceiling!