Press and hold the “replace filter” switch for 3-5 seconds until you hear a beep. The “replace filter” light should shut off when it beeps. How often should you change your Bissell filter?
How often should I replace my Bissell vacuum filter?
Replacing vacuum filters a few times a year is important for your machine. All BISSELL vacuum filters can be purchased on Bissell.com.
How do I use the powerforce™ helix accessory tools?
Your new PowerForce™ Helix vacuum not only does a great job on your floors, it also comes with a complete set of accessory tools to make your above floor cleaning jobs easier. Just put your vacuum in the upright position, pick the accessory tool that best fits your needs and attach it to the end of your hose.
How to use Bissell vacuum cleaner?
Just put your vacuum in the upright position, pick the accessory tool that best fits your needs and attach it to the end of your hose. You’re ready to clean base boards, curtains, upholstery and much more. For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field.
How can I prevent my powerforce™ helix vacuum from damaging my carpet?
To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward. Your new PowerForce™ Helix vacuum not only does a great job on your floors, it also comes with a complete set of accessory tools to make your above floor cleaning jobs easier.
How to clean a septic system filter?
How to clean a pre motor filter?
About this website
Does the Bissell Powerforce Helix have a filter?
Post Motor Fiber Filter fits Powerforce Helix Turbo Upright Bagless Vacuum - Series 1701. This filter is washable. Wash with warm water and mild detergent and allow to air dry prior to next use.
How many filters are on a Bissell Powerforce Helix?
two filtersThere are two filters in your vacuum. One is the Pre-Motor Filter, and the other is the Post Motor Filter.
How do you take apart a Bissell Powerforce Helix?
0:323:01Maintenance and Care - Powerforce Helix Turbo - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen the dirt container lid by lifting the release latch on the front remove the premotor filter.MoreOpen the dirt container lid by lifting the release latch on the front remove the premotor filter. And pull the filter out to clean once it's clean and dry place it back in the dirt container lid.
Where is the filter on a Bissell Powerforce?
Locate the filter found on the left side at the bottom of the bag compartment. The filter can be hand washed with warm water. Once clean, let it dry completely. After drying, the filter can now be put back into the vacuum.
How do you take the filter out of a Bissell vacuum?
1:011:44How to Clean the Filters of Your CleanView® Vacuum CleanerYouTubeStart of suggested clipEnd of suggested clipInstead just tap the filter gently on the side of a garbage can to remove dust and debris. OnceMoreInstead just tap the filter gently on the side of a garbage can to remove dust and debris. Once clean put the filter back and replace the filter door by lining up the sides.
How many filters does a Bissell vacuum have?
two filtersYour machine comes with two filters. To locate the Pre-Motor filter, press the tank release button and remove the dirt tank. To access the filter, press the Filter Button found on the front of the tank and remove the foam filter from the tray.
How do you open a Bissell PowerForce vacuum?
0:081:00BISSELL PowerForce® Bagged Bag Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the tag along the perforated line to release the fresh Febreze scent replace. The back doorMorePull the tag along the perforated line to release the fresh Febreze scent replace. The back door onto the machine. It's that simple to change the bag in your Powerforce you.
How do I clean my Bissell Helix vacuum?
Holding Dirt container over a trash bin, press the release button on the back. Once empty, snap the bottom back into place. To clean the pre motor filter, open the dirt container lid by lifting the release latch on the front. Remove the pre motor filter and pull the filter out to clean.
Does Bissell PowerForce Helix have a HEPA filter?
The BISSELL PowerForce Helix is excellent for picking up pet hair. It can easily deal with this kind of debris on everything from bare floors to low and high-pile carpet. However, there's no onboard HEPA filter to trap allergens as you clean.
How do you put a filter in a Bissell Powerforce bagless vacuum?
0:051:49Cleaning the Filters in Bissell PowerForce or Cleanview Bagless ...YouTubeStart of suggested clipEnd of suggested clipPosition grasp the filter cup and twist counterclockwise to unlock and remove it from the dirtMorePosition grasp the filter cup and twist counterclockwise to unlock and remove it from the dirt container grasp the circular filters and twist to unlock.
Where is the filter on Bissell carpet cleaner?
To access the filter, press the tank release button and remove the dirt tank. Turn the top of the tank counter clockwise and pull up to separate. Remove the foam filter. Hand wash in water; mild detergent may be used if desired.
How do you clean a PowerForce Helix filter?
0:070:55PowerForce® Compact Filter Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe filter can be washed by hand in warm water and a mild detergent may be used rinse. Well thenMoreThe filter can be washed by hand in warm water and a mild detergent may be used rinse. Well then allow to dry. Completely before returning to the dirt container lid.
Does Bissell PowerForce Helix have a HEPA filter?
The BISSELL PowerForce Helix is excellent for picking up pet hair. It can easily deal with this kind of debris on everything from bare floors to low and high-pile carpet. However, there's no onboard HEPA filter to trap allergens as you clean.
How do you assemble a Bissell PowerForce?
0:040:55PowerForce® Compact Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you'll want to position the handle. So the lower tab is facing the back of the vacuum. NowMoreFirst you'll want to position the handle. So the lower tab is facing the back of the vacuum. Now insert the handle into the base and push next wrap the power cord around the upper.
What kind of belt does a Bissell PowerForce Helix use?
Replacement Belts for Bissell PowerForce & PowerForce Helix Using Belt #3031120 & Drive Belt Style 7/9/10 - 2PK.
How to turn off a vacuum?
Press the red Power Switch Pedal with your foot to turn ON your vacuum. Press it again to turn your vacuum OFF when you’ve finished cleaning.
How to lift dirt tank from vacuum?
Press Tank Release Button and pull handle to lift Dirt Tank away from vacuum.
How to remove a clogged vacuum hose?
Remove the hose from the back of the vacuum by twisting it to the left. Remove any debris that may have gotten clogged. Check the foot hose on the back of your vacuum down towards the bottom.
How to attach a handle to a swivel handle?
First, place the Upper Handle onto the base and push it down. Then attach the handle with the 2 screws that are taped to the handle in a plastic bag.
Does Bissell have a privacy policy?
It may be necessary to obtain some of your personal information, such as a mailing address, to fulfill terms of this warranty. Any personal data will be handled pursuant to BISSELL’s Privacy Policy, which can be found online at www.BISSELL.com /privacy-policy.
Does Bissell repair or replace?
Subject to the *Exceptions and Exclusions from the Terms of the Limited Warranty, upon receipt of the product BISSELL will repair or replace (with new, refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years, any defective or malfunctioning part.
How to clean a septic system filter?
Clean all the filters with mild detergent, rinse, and squeeze all excess water. Allow filters to dry completely before reinserting.
How to clean a pre motor filter?
To clean the pre motor filter, open the dirt container lid by lifting the release latch on the front. Remove the pre motor filter and pull the filter out to clean. Once it's clean and dry, place it back in the dirt container lid. To access your post motor filter the dirt container must be removed.
How to clean a foam vacuum filter?
Foam vacuum filters that can be washed should be gently cleaned by hand with warm water and a drop or two of mild detergent. Make sure the vacuum filter is completely dry before being put back in to the vacuum for use.
Where is the vacuum filter located?
Vacuum filters can be found in several places, depending on the model. The best places to look are above the dirt cup and below the dirt cup, and there may be another on the back of the machine.
Do you need to clean a vacuum filter?
Most people don’t realize the importance of cleaning and replacing their vacuum filters. But your vacuum is just like any other appliance in your home, it requires maintenance. If the filter isn’t clean, it can impact the performance of the vacuum.
Where to find Bissell model number?
For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field.
Does Bissell have a warranty?
See information below on “If your BISSELLproduct should require service”. This warranty applies to product used for personal, and not commercial or rental, service. This warranty does not apply to fans or routine maintenance components such as filters, belts or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the user guide is not covered. This warranty will only be valid if the product is used in the same country in which it was sold.
Can you change polarized plugs in an outlet?
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plugin any way.
How to clean a septic system filter?
Clean all the filters with mild detergent, rinse, and squeeze all excess water. Allow filters to dry completely before reinserting.
How to clean a pre motor filter?
To clean the pre motor filter, open the dirt container lid by lifting the release latch on the front. Remove the pre motor filter and pull the filter out to clean. Once it's clean and dry, place it back in the dirt container lid.