Remove the drive belt gently and replace with the new belt. Reattach the drive belt cover using your 1/4" drive ratchet. Gently rest the washing machine back against the wall and reconnect all power supply. Almost done! To replace your drive belt in your Maytag Bravos washer follow this simple 8 step guide.
How do you replace a belt on a Maytag Bravos washing machine?
Remove the drive belt gently and replace with the new belt. Reattach the drive belt cover using your 1/4" drive ratchet. Gently rest the washing machine back against the wall and reconnect all power supply. Almost done! To replace your drive belt in your Maytag Bravos washer follow this simple 8 step guide.
How do you remove the drum from a Maytag Bravos dryer?
Take the drum out of the Maytag Bravos dryer by placing one hand on the bottom of the drum in the back and one hand on the top in the front , lifting up on the back end to dislodge it from the slot in the rear panel. Remove the drum from the dryer cabinet.
How do you replace the belt on a whirlpool dryer?
Replace if sticking or binding, by pulling off the spring clip that holds the idler pulley to its shaft. Getting the belt around the idler in these clothes dryer machines can be a real son-of-a-gun. For one thing, the belt is sort of upside-down compared to other machines; the flat side goes against the drum and idler.
Are Maytag Bravos and GE dryers the same?
The Maytag Bravos dryer is part of the GE line of appliances and uses many of the same mechanical designs and systems. The body style of the dryers are designed with different features and looks, but the interior parts are similar.
See more
How do you fix a squealing dryer on a Maytag Bravos?
6:4520:31Maytag Bravos Annoying Dryer Squeal Diagnosis and RepairYouTubeStart of suggested clipEnd of suggested clipOff you pull that drum out. And inspect these pulleys here that idler pulley is stuck. And that'sMoreOff you pull that drum out. And inspect these pulleys here that idler pulley is stuck. And that's likely what the noise is you can even see some wear. From the belt. On that pulley.
How do you change a belt on a old Maytag dryer?
0:258:38OLD MAYTAG DRYER BELT REPLACEMENT - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce those are off you pull the bottom of the front panel. Towards you by about 45 degrees. And thenMoreOnce those are off you pull the bottom of the front panel. Towards you by about 45 degrees. And then you can pull out the top clips that are holding it in and then.
How do you open the top of a Maytag Bravos dryer?
0:442:36Maytag Bravos series dryer - front panel and dryer duct accessYouTubeStart of suggested clipEnd of suggested clipAnd I took a little putty knife and shoved it in there and this lid popped up and this I took aMoreAnd I took a little putty knife and shoved it in there and this lid popped up and this I took a little bit of swearing. And jiggled it and you're able to raise this lid up you have to get the lid up.
How do you change a belt on a Maytag Bravo washer?
How to Check and Replace Your Maytag Washer's Drive BeltUnplug the washing machine and turn off both the hot and cold water supply lines. ... Tilt the machine so it's lying on its front panel. ... Remove the shield from the bottom of the appliance. ... Remove the belt. ... Insert the new belt. ... Put the shield back into position.More items...•
How much does it cost to replace a belt on a dryer?
Replacing a dryer belt ranges from $150 to $250. Dryer belts break under too much stress, so you should avoid overloading the dryer.
How do you open a old Maytag dryer?
0:183:02Maytag Dryer Disassembly (Model #DE412) – Dryer Repair HelpYouTubeStart of suggested clipEnd of suggested clipNext remove the screws to release the front bulkhead from the cabinet. Reach under the drum and pushMoreNext remove the screws to release the front bulkhead from the cabinet. Reach under the drum and push the idler pulley up to release the belt tension unthread the belt from the pulley and motor shaft.
How do you take the top off a Maytag front load dryer?
0:447:07How to Take Apart a Maytag and Maytag Performa Dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top has to be flipped up first. And if you pried a little bit there you'll see a clip hereMoreThe top has to be flipped up first. And if you pried a little bit there you'll see a clip here nothing here on that clip. The same on the other. Side.
How do you clean the lint off a Maytag Bravos XL dryer?
3:1323:26Maytag bravos overheating Drying Slow? Easy step-by-step Lint Clean ...YouTubeStart of suggested clipEnd of suggested clipSide all right from right here there's a hook on the bottom. And on this side we're going to leanMoreSide all right from right here there's a hook on the bottom. And on this side we're going to lean forward just a tiny. Bit.
How do I lift the top of my dryer?
To remove the dryer's top, lift out the lint trap and, underneath it, unscrew the screws that secure the dryer's top. For some dryers, you'll need to remove screws at the top of the back panel. Push a stiff, thin putty knife between the top and one side, about 2 1/2 inches from the front corner.
How do you change a drum belt on a Maytag dryer?
0:561:55How to Replace a Maytag Electric Dryer Drive Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the front panel forward slightly. And then lift. And unhook it from the two bottom hangers.MorePull the front panel forward slightly. And then lift. And unhook it from the two bottom hangers. Pull the front panel off of the dryer. And set it aside. Pull the broken belt out of the cabinet.
Does a Maytag Bravo washer have a belt?
The belt is fairly elastic and easy to remove. Remove the drive belt gently and replace with the new belt.
How many belts does a Maytag washer have?
two beltsThere are two belts under a Maytag washer; one for the main drive pulley and one for the water pump. The belt kit includes both the drive belt and the pump belt which are both V-shaped.
How do you change a drum belt on a Maytag dryer?
0:561:55How to Replace a Maytag Electric Dryer Drive Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the front panel forward slightly. And then lift. And unhook it from the two bottom hangers.MorePull the front panel forward slightly. And then lift. And unhook it from the two bottom hangers. Pull the front panel off of the dryer. And set it aside. Pull the broken belt out of the cabinet.
Why is my Maytag dryer not spinning?
A damaged or worn drive belt is one of the most common reasons for a dryer not to spin. The drive belt connects the drum to the motor. The drive belt can become brittle or wear out over time. You can easily test whether your drive belt is broken.
How do I find the model number of my Maytag dryer?
For Maytag dryers, they are located in a few different places: inside the door, inside the back frame, and on the back cabinet in the upper left corner. For gas dryers, the model number is located behind the access panel.
Why is my dryer squeaking Maytag?
Screeching Noise from the Front of the Dryer This often stems from a worn-out idler pulley, which puts tension on the dryer's drum belt to prevent it from slipping off during a cycle. Accessing and changing your dryer's idler pulley can be a straightforward but extensive process.
Things You Will Need
Unplug your Bravos dryer from the wall. Use your wrench to disconnect the water lines from the wall. Push your dryer away from the wall at least five feet to give yourself working room.
The Drip Cap
The Bravos line of dryers, made by Maytag, uses a belt to rotate the drum that tumbles the clothes.
How long does it take to replace a Maytag Bravos washer drive belt?
Instead, this easy to follow guide will go over the steps required to replace the drive belt in your Maytag Bravos washer. It is a fairly quick fix taking only around 20 minutes to complete once the tools required (listed in the tools section) are obtained. Visuals are also provided to help ensure those of any skill level can perform this fix.
How many cogs does a drive belt have?
Following removal of the cover you will see the drive belt roped around two cogs.
What is chapter 2 of Maytag?
NOTE: Chapter 2 covers problems common to almost all Maytag dryer designs, like heating problems. THIS chapter covers only diagnosis and repairs peculiar to Maytag-built dryers. If you do not read Chapter 2 thoroughly before you read this chapter, you probably will not be able to properly diagnose your Maytag machine!
How to remove wrap around door on kitchen cabinets?
After removing the four screws inside the door opening, you have to kinda "roll" the top corners of the front panel outwards (Figure ML-2) to disengage them from the clips beneath them. The top of the front panel is then free from the cabinet, and you tilt it forward and lift it to remove it. The door can then be removed by lifting it off its hinges and "jiggling" the hinges out of their slots. To remove the cabinet top, slide it forward and lift.
How to replace a stuck idler?
Don't forget to check that the idler rolls smoothly. Replace if sticking or binding, by pulling off the spring clip that holds the idler pulley to its shaft.
Where is the blower fan on a motor?
The motor and blower are on the left side of the baseplate of the machine. A spring-loaded idler, mounted to the motor baseplate, keeps tension on the belt.
Is the belt upside down?
For one thing, the belt is sort of upside-down compared to other machines; the flat side goes against the drum and idler. (See figure ML-5) There's also a lot of spring tension. Try to position the belt as closely as possible on the old skid marks on the drum.
What does a belt switch do on a Maytag dryer?
If the belt breaks mid-cycle, the switch turns off your dryer and keeps it off until the damaged belt is replaced. Like any other component in your appliance, the belt switch can malfunction causing your dryer to stop working even though the drive belt is fully functional. If you believe a bad belt switch is preventing your appliance from turning on, please follow the replacement guide provided below.
How to change belt switch on a motor?
Grab the new belt switch and snap it into the motor mounting bracket. Next, reattach the idler pulley by replacing its shoulder bolt. Then, connect the belt switch wires to the drive motor .
Where is the idler arm on a dryer?
Take the shroud cover off the dryer and locate the idler arm and motor at the bottom of the cabinet, moving the idler arm forward to relieve the tension on the belt.
How to unfasten door switch connector?
Tilt the front panel forward and unfasten the door switch connector from the metal prongs on the back of the front panel by hand, setting the panel off to the side.
