How do you join two curtain rods together?
Inner Piece. Some curtain rod manufacturers sell connectors designed to fit inside the rod, allowing you to join two or more matching rods together to create one long piece. These inner tubes screw into place, requiring holes drilled at the ends of the curtain rod pieces to secure the entire structure together.
How do I fix this hole in my Curtain Pole?
What I'd do is drill out the too large hole to make it large enough to take a dowel. You'll need to clamp the curtain pole to ensure you get a clean hole. Then glue a dowel into hole and cut it off flush - use a hacksaw and then sandpaper to finish. Leave this to dry and then drill a new pilot hole in the dowel to take the joining screw.
How do you attach dowel rods to curtain rods?
A Turn of the Screw. For wooden dowel curtain rods, a connector screw -- a screw with threads at each end -- holds two identical rods together. Drill a pilot hole in one end of each of the two matching dowels, and then insert the connector screw. A piece of dowel rod or a peg can be used in place of a screw.
Can you put a double curtain pole over a window?
Brackets for Double Curtain Poles. Our range of double brackets are designed to allow 2 curtain poles to fit over one window. Usually the larger rod is fitted in the front position with the main curtains and the thinner diameter at the back with the light weight drapes, sheers or nets.
How to reduce curtain rod diameter?
How wide is a curtain rod?
How to glue a dowel to a rod?
What is a coupler for a pipe?
How to make a seam disappear on a dowel?
Can you put a dowel in a curtain rod?
See 3 more
About this website
Can you join two curtain poles together?
Connectors are used to join two curtain poles together to create longer lengths. For metal rods a joining piece is available in the corresponding diameter which fits inside the poles. A simple double sided screw is used to join the two wooden rods together and an extra bracket is used to support the join.
How do you extend a curtain pole?
1:024:12Q & A - How to extend a metal conduit curtain rod. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next step is to measure the length for that electrical conduit. And then to cut it using eitherMoreThe next step is to measure the length for that electrical conduit. And then to cut it using either a metal cut-off saw or an angle grinder with a metal cut-off disc.
How do you connect two curtain tracks?
It's really simple to do but does require the track to be ceiling mounted only (top fixed), simply install one track in front of the other in the centre. This will allow the curtains to overlap each other, providing additional privacy for bedrooms or living rooms.
How do you splice curtain rods?
0:131:36Tube Splice | metal drapery rods by Urban Decors - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your other rod pinch the other side slide it in press if twist it a little bit and that's howMoreTake your other rod pinch the other side slide it in press if twist it a little bit and that's how you splice together.
How far should a curtain pole extend past window?
How long should the pole be? This can be subjective and is influenced by obstructions around the window area. But as a guide the pole should extend about 15-20cm (6-8in) beyond the window recess on each side. And it should be fitted symmetrically relative to the window opening.
How do extendable curtain rods work?
It is a telescopic pole ( i.e two sections of pole with slightly different diameters, allowing the narrower of the two to slide snugly inside the wider one), which slides in and out, making it adjustable in length to any given measurement within the maximum and minimum sizes specified.
How do you extend a telescopic curtain rod?
0:121:35Telescoping Window Tension Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd with their right hand rotate. The ankle. Towards you until rod is secure to install shorter 24MoreAnd with their right hand rotate. The ankle. Towards you until rod is secure to install shorter 24 to 54 inch rod.
How do you hang a 3 piece curtain rod?
3:154:51Putting Together 120-170" Curtain Rod (3 pieces) and Finials - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you simply line the pieces up find the and find the connection. Then slide it in you do the sameMoreSo you simply line the pieces up find the and find the connection. Then slide it in you do the same thing on the other side make sure you go with the opening.
How do you extend an adjustable curtain rod?
0:471:39Spring Tension Rods - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use either a Phillip pad or a flathead screwdriver the screw on the end. Allows. For eitherMoreYou can use either a Phillip pad or a flathead screwdriver the screw on the end. Allows. For either one you just simply want to loosen that screw up slightly.
How do you extend a telescopic curtain rod?
0:121:35Telescoping Window Tension Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd with their right hand rotate. The ankle. Towards you until rod is secure to install shorter 24MoreAnd with their right hand rotate. The ankle. Towards you until rod is secure to install shorter 24 to 54 inch rod.
How far should a curtain rod be from the wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window's edges.
How high should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor. A popular hem finish for silk or lined curtains is called a trouser kick.
Decorator Tricks for Curtain Rod Extensions - Home Guides
A sleeve-style connector joins matching rod pieces, whether they're made of metal, wood or even PVC. A premade sleeve designed for an actual curtain rod is available at drapery supply shops or ...
How to join several curtain panels?
I purchased several curtain panels to cover a wide window. How should I join them so they appear as one curtain please? I need to join together two panels for each side. The fabric is almost like microsuede. Should I sew them together and if so how? Should I consider taping them together? These curtains will be washed occassionally.
Comments (2)
Depends on the curtains are there tabs or are the straight across? If straight across would probably use a french seam that would give them a custom look appearance.
How to reduce curtain rod diameter?
Sand or shave both ends of the doweling to reduce the diameter enough to fit inside the curtain rod. You can do this with a pad sander and 100-grit sandpaper, a belt sander or even a pull scraper. Remove enough material to allow you to insert the dowel to a depth of 2 to 3 inches.
How wide is a curtain rod?
Adapting a curtain rod to fit a wide window may take some ingenuity. Standard curtain rods are expandable from 28 to 48 inches or from 48 to 84 inches, and for extra-wide windows, you can purchase rods that extend as far as 159 inches. If you have a window with a nonstandard width, you may want to adapt your current rod to fit it rather ...
How to glue a dowel to a rod?
Cut the end of the doweling flush with the end of the rod, using a handsaw. Then tap the doweling in another 1/8 to 1/4 inch, using a hammer and screwdriver. Insert the other end of the doweling into the other rod in the same way, and then wait two hours for the glue to set. Advertisement.
What is a coupler for a pipe?
The coupler consists of a short length of pipe that slides over the two pieces you're connecting. It has a pair of set screws that you tighten with an Allen wrench or Phillips screwdriver to secure the pipes you're connecting.
How to make a seam disappear on a dowel?
After you're done, cut the spliced rod to the length you need, using a hacksaw or a pipe cutter. If you want to make the seam disappear, fill it with epoxy putty.
Can you put a dowel in a curtain rod?
If you don't have any extra curtain rods, you can always insert a dowel in the rod you do have using the technique above, then cut it to length with a saw and paint it. Chris Deziel is a contractor, builder and general fix-it pro who has been active in the construction trades for 40 years.
Why do curtain rods bow in the center?
Because this combination rod is a bit longer than originally intended, it may bow a little in the center, especially under the weight of curtains. Add a curtain rod bracket at the center of the window to support the extra length if there isn't one already in place.
What is a slip and slide curtain rod?
Slip and Slide. Some curtain rod sets are actually two pieces of hollow metal: one piece is slightly narrower than the other, sliding inside the first to create an adjustable rod. Two of these rods together morph to form one extended rod.
What is a sleeve connector?
A sleeve-style connector joins matching rod pieces, whether they're made of metal, wood or even PVC. A premade sleeve designed for an actual curtain rod is available at drapery supply shops or home improvement stores; this style is typically a metal two-piece tube that clamps over the union of two rods. Small screws tighten down to hold the tube halves together and tighten the sleeve over the curtain rod coupler. Similar devices are sold in the plumbing department of a home improvement store in assorted diameters; paint the connectors to match the rod.
How to reduce curtain rod diameter?
Sand or shave both ends of the doweling to reduce the diameter enough to fit inside the curtain rod. You can do this with a pad sander and 100-grit sandpaper, a belt sander or even a pull scraper. Remove enough material to allow you to insert the dowel to a depth of 2 to 3 inches.
How wide is a curtain rod?
Adapting a curtain rod to fit a wide window may take some ingenuity. Standard curtain rods are expandable from 28 to 48 inches or from 48 to 84 inches, and for extra-wide windows, you can purchase rods that extend as far as 159 inches. If you have a window with a nonstandard width, you may want to adapt your current rod to fit it rather ...
How to glue a dowel to a rod?
Cut the end of the doweling flush with the end of the rod, using a handsaw. Then tap the doweling in another 1/8 to 1/4 inch, using a hammer and screwdriver. Insert the other end of the doweling into the other rod in the same way, and then wait two hours for the glue to set. Advertisement.
What is a coupler for a pipe?
The coupler consists of a short length of pipe that slides over the two pieces you're connecting. It has a pair of set screws that you tighten with an Allen wrench or Phillips screwdriver to secure the pipes you're connecting.
How to make a seam disappear on a dowel?
After you're done, cut the spliced rod to the length you need, using a hacksaw or a pipe cutter. If you want to make the seam disappear, fill it with epoxy putty.
Can you put a dowel in a curtain rod?
If you don't have any extra curtain rods, you can always insert a dowel in the rod you do have using the technique above, then cut it to length with a saw and paint it. Chris Deziel is a contractor, builder and general fix-it pro who has been active in the construction trades for 40 years.
