How to Make a DIY Window Valance
- Fabric Covered Valance Tutorial Step One – Making the Pattern ...
- Step Two – Transfer Pattern and Cut Styrofoam The commercially cut edge of the styrofoam will be the neatest, so take advantage of that. ...
- Step Three – Building the Cornice ...
- Step Four – Covering with Fabric ...
- Step Five – Hanging on the Wall ...
Full Answer
How do you measure for a valance?
Divide the final valance length measurement by the number of valance heights you can fit onto your fabric. For example, if your final valance length measurement is 122 inches and can fit three valance heights on your fabric, you would divide 122 by three to get 40.67. Round this number up to the nearest whole number.
Can You Make your own window valances?
Window valances are a quick way to add a pop of texture and color to any room in your home. While valances can be expensive, you can quickly and easily make them yourself with a few basic sewing supplies and beginning sewing knowledge. Because windows come in all widths, calculating the amount of fabric you need may be a bit of a challenge.
How many Valances can you put on a piece of fabric?
To do this, take the width of your fabric (usually either 44 or 60 inches) and divide it by your final height measurement. For example, if you use 44-inch fabric and have a 17-inch height measurement, you could fit two full valance heights onto the fabric If you use 60-inch fabric, you could fit three valance heights onto your fabric.
How do you make a gathered valance?
This very traditional valance is made by using twice the needed fabric width to create the gathered effect. Decorative fringe on the bottom of this valance adds extra flair.
How big should I cut valance fabric?
How to hang a valance?
How to keep seams neat?
Why hang a styrofoam valance?
How to cover rough edges of a sandbox?
How to make a bottom arch?
See 1 more
How do you cover a wooden valance with fabric?
1:354:47How to Cover a Cornice Board with Fabric - HIP Chicks Part 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd do that around the whole perimeter. Trying to keep it nice and flat. In the corners where youMoreAnd do that around the whole perimeter. Trying to keep it nice and flat. In the corners where you tuck it and staple. For this cornice board I'm using this gorgeous brick red medallion print fabric.
How do you cover a valance board?
0:322:03How to Cover a Cornice Board : DIY Home Decor Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext begin in the middle of the flat area folding over and stapling the batting. Into place workMoreNext begin in the middle of the flat area folding over and stapling the batting. Into place work your way around the box tuck and pleat the corners cutting away excess batting. So it is not too bulky.
How do you make an upholstered valance?
7:178:43Try This EASY DIY To Enhance Your Windows - Create An Upholstered ...YouTubeStart of suggested clipEnd of suggested clipSo what i did was take one of the pieces of wood and screw it down to one side and then do the otherMoreSo what i did was take one of the pieces of wood and screw it down to one side and then do the other and i used one and a half inch screws. For this and then i placed the d-ring.
How do you hide a cornice?
Start covering your cornice board by applying a layer of batting for a truly upholstered look. This cushy covering should be wrapped around the inside edges of the cornice and can be attached using a staple gun along with glue.
How much fabric do I need to cover a cornice board?
Measure the cornice from the top edge to the bottom edge and add 6 inches for the required fabric cut length.
How do you make fabric covered cornices?
Cover the Cornice Frame with Fabric Wrap the front and edges of the frame in upholstery batting, stapling it to the back. Cut the fabric oversized to width and length. Staple the fabric to the back edge of the top header. Fold the fabric over the front of the frame and staple it to the bottom in the back.
How do you make a fabric pelmet?
You can make a pelmet for curtains by using foam core or plywood to create a structure which can be covered in a fabric of your choice and mounted to the wall above your curtains....Step 1: Measuring for Size. ... Step 2: Cut Foam Core/Plywood. ... Step 3: Cover with Quilt Batting. ... Step 4: Cover with Fabric. ... Step 5: Fit to the Wall.
What kind of batting do you use for cornice?
I recommend using batting that is 3/4″ to 1″ thick. It may look too poufy to you, but it will be mashed down a little once the fabric is applied. Cut a piece of batting that is several inches wider and taller than the overall size of the cornice face and sides.
How do you make a window valance box?
0:512:37How to Make a Window Cornice Box | HGTV - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut we're attaching it to the frame with screws you want to drive them in all the way so that thenMoreCut we're attaching it to the frame with screws you want to drive them in all the way so that then you can fill them with putty afterward. And sand it off for a perfect finish.
How do you decorate a window cornice?
Pull a color from your couch's accent pillows or your bedspread and repeat it in the cornice to create a cohesive scheme. If you have plain, wooden boxes, paint the cornices to match, then seal them with a high-gloss clear coat, or wrap the cornices in fabric for easy swapping if your tastes change.How to Decorate a Boring Window Cornice - Home Guideshttps://homeguides.sfgate.com › decorate-boring-window-...https://homeguides.sfgate.com › decorate-boring-window-...
How do you make cornice blinds?
2:205:26How to make a window cornice or valance - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf they don't have a curve you're good to go join the corners of the top and bottom frames using aMoreIf they don't have a curve you're good to go join the corners of the top and bottom frames using a corner clamp it just makes it easier to drill the pilot holes to prevent splitting.How to make a window cornice or valance - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
How do you decorate a cornice?
0:233:33Window Coverings Ideas: Top Banana Cornice - How To Make ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo easy with these innovative tuck slots to line up your fabric. And pattern. Straight across theMoreSo easy with these innovative tuck slots to line up your fabric. And pattern. Straight across the corners flip the cornice and tuck the remaining fabric into the slot.Window Coverings Ideas: Top Banana Cornice - How To Make ... - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
Are cornice boards out of style?
Cornices, whether made of wood cornice boards and stained to perfection or covered in a lovely fabric will always be in style for modern windows.
What type of wood is used for cornice boards?
The face of the cornice can be made from OSB (oriented strand board) or plywood (1/2” in thickness). Use 1" x 4" or 1" x 6" lumber for the top piece (dust board), and side pieces (legs). The size lumber used for the top and sides depends on the projection needed, and can be customized.
How do you make padded cornice?
What To Do:Build cornice frame. Cut lumber slightly larger than the width of your window. ... Cover frame with batting. Cut batting to double the width of board and exact length. ... Repeat with fabric. Spray batting with glue and wrap fabric around frame tightly. ... Hang over window.
How do you staple a valance?
0:261:51How To Staple Valance To Covered Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's time to staple the valance to the board i have a center mark marked on the board here soMoreSo it's time to staple the valance to the board i have a center mark marked on the board here so that will be easy to line up right along with where my pleat.
How many yards of black and white toile fabric for a valance?
Yardage Used: 7-3/4 yards for the black and white toile fabric. The jabots and trumpets were self-lined (meaning, they were lined in the same black and white fabric as the rest of the valance). The white lining for the swags only required about 2-1/2 yards. We used 5-1/2 yards of black chainette trim.
How many yards of fabric for a valance?
Yardage Used: The valance and drapes required a total of 18-1/2 yards of the red faux silk fabric, then 18-1/2 yards of lining and another 18-1/2 yards of interlining. The valance also used an additional 5-1/2 yards of a yellow plaid accent fabric to line the cascades and inverted box pleats of the valance. We also used 9 yards of ball tassel fringe for the valance.
What determines the yardage needed for a valance?
Obviously, this is a wide range. That’s because the three main factors that will determine the yardage needed are the valance pattern, size, and fabric repeat.
How wide is a valance?
But first, some basic rules: Valances are made with 54-inch wide home decor fabrics. Leave those 45-inch fabrics alone – those are for clothes, not window treatments. Fabric patterns have a vertical and horizontal repeat.
Do you need a lot of fabric for inverted pleats?
Comment: Be careful with inverted box pleats. Most of the fabric used for them ends up being hidden for view so it may not seem like you’ll need a lot, but you do .
How much fabric is needed to make a valance?
3 1/2 yards of 44” wide main fabric is needed to make my valance. (I rounded up since I’m happier buying just a little more than just a little less.)
How to sew a blindhem on a valance?
Then fold the hem toward the right side of the fabric so that about 1/4″ of the folded edge of the hem is exposed. Select the Blindhem Stitch #9. Use the Blindstitch foot for Dual Feed (DM) to sew a blindhem along the bottom of the main fabric.
How to double fold a hem?
Press a double fold 1” hem on each side, first pressing in 2” and then pressing the raw edge almost to fold. Change the stitch length to 3.0 and reduce the Presser Foot Pressure to 30 (fine-tune as needed for your fabrics). Using the Blindstitch foot for Dual Feed (DM), edgestitch both sides of the valance.
What is a valance?
What IS a valance? It is a top window treatment that can be used all by itself or placed over other draperies. You can make it out of a wide variety of fabrics, from sheer laces to heavyweight decorator fabrics. Because not a whole lot of fabric is used, it is a less expensive option for decorating a window. A lining can be added, which makes the valance more durable, adds extra body, supports side hems and headings, and reduces the visibility of seams. I’m using medium-weight cotton, so I’m going to add a lining. I think it gives a more professional finish, too. If you are making your valance out of sheer or lightweight fabric, you can skip this step.
Can you wash decorator fabric?
Some decorator fabrics are meant for dry-clean only , while others are washable, such as cotton. Check the label on the bolt. If you plan to wash your valance periodically (such as in a kitchen or bathroom), you may want to choose washable fabrics and pre-wash them before starting to sew.
What is a valance with a cafe curtain?
11. Valance with cafe curtain. Combine a highly stylized valance with a cafe curtain in a coordinating fabric for a traditional, layered look. The combination provides the style of heavy draperies while still allowing for light and privacy.
How high should a valance be?
Styling tip: Your valance should hang between 16 and 21 inches, depending on the height of your window. A valance that is too short or too long will distract the eye.
How to coordinate draperies?
Styling tip: To completely coordinate your draperies into your space, try adding the same fringe from your valance around the edges of your comforter or duvet cover.
What is a Queen Anne valance?
12. Queen Anne valance. This dramatic valance has a horizontally set cord detail near the top and a scalloped bottom edge with fringe. Each flat space is divided by a fan pleat for a Victorian feel. In this space, matching functional draperies are pushed to the side for needed privacy.
What is an arched valance?
2. Arched valance. An arched valance is a highly proportioned, decorative fabric valance with a top arch and center pleat. The bottom of the valance has a coordinating band of fabric for an accent.
Why do people hang valances above windows?
A short length of decorative drapery, valances are often hung above windows to disguise curtain rods or simply give a space polish.
Can you use valances on a window?
From super simple to extremely customized, these treatments can be installed on formal picture windows, on functional doors and even above beds. Use a valance alone or combine it with draperies, horizontal blinds, cellular shades or shutters to create the look that works best with your home.
How to measure for a window valance?
Figure the base height of your window valance. To do this, take the measurement length you wrote down and divide it by three. For example, if your window length as measured is 42 inches, you would divide by three to get a base length of 14 inches. Add 3 inches to this measurement to allow for seam allowances and a curtain rod casing. In the example provided, the new height would be 17 inches. This new measurement is your final measurement for your window valance.
How to measure valance height?
Calculate how many valance height measurements you can fit onto the width of your fabric. To do this, take the width of your fabric (usually either 44 or 60 inches) and divide it by your final height measurement. For example, if you use 44-inch fabric and have a 17-inch height measurement, you could fit two full valance heights onto ...
What is window valance?
Window valances are a quick way to add a pop of texture and color to any room in your home. While valances can be expensive, you can quickly and easily make them yourself with a few basic sewing supplies and beginning sewing knowledge.
What to do with fabric once you get it home?
Preparing Your Fabric. There are a few things you NEED to do with your fabric once you get it home. One thing most pros will tell you to do is to wash and dry it. I don’t do this…. I know, rebel… but I don’t plan on washing my valances so I don’t see the point.
What do I use to tack valances?
I used silver push pins with small heads to tack my valances to my valance boxes. Eventually I’d like to make this more permanent so the girls don’t tear them down or the pins don’t work their way out.
Why do you wash and dry fabric?
The reason to wash and dry your fabric is simple and that’s to pre-shrink it if it’s going to shrink at all.
When you iron fabric, are you ready to cut it?
Once you’ve got your fabric ironed you’re ready to cut it.
How to use heat and bond tape?
Roll your heat n bond tape out on the edge of the fabric. Apply the iron along the length of the tape with paper side up until you have each side done. Do both of your lengths first, then your widths last. I did one side at a time from start to finish with the tape.
Do you cut fabric with extra length?
Remember you cut your fabric with a bit of extra length and width. You did this because you need to fold your fabric selvage over and iron it down.
Do you have to climb on top of a table to cut fabric?
And no you don’t need to climb on top of your table to cut fabric… unless you’re short like I am and your table comes up to your chin. (Don’t judge me.)
How big should I cut valance fabric?
For my valance, I cut my fabric at 18 by 52″ to give lots of room to make adjustments. If yours is a different dimension I recommend measuring around your cornice and adding 6 inches for seams.
How to hang a valance?
The valance is very light so it’s easy to do. Start by attaching the hangars at each end of the valance. I simply screwed them in right through the fabric.#N#q
How to keep seams neat?
Your seams will look neat and tidy when you turn them over, and tuck away all the threads. Use lots of pins to hold the stray threads in place. Other than needed to make neat notches in the arch of the fabric covered valance. You will need to make sure that the notch in the valance is pinned very well.
Why hang a styrofoam valance?
Hanging Styrofoam valances is so much easier than the wooden ones because they are light. Hubs preferred me to do it this way as the marks on the wall are much less than a mounting bracket for wood.
How to cover rough edges of a sandbox?
Cover your rough edges especially the bottom arch with duct tape. You will want to make little slices in your duct tape so that it curves around easily.
How to make a bottom arch?
To create the bottom arch. Find the center of the rectangle by folding the paper in half, lining up the two edges of the rectangle. Mark the center with a long line.
